Why is there so little use of carbon wood as interior flooring in home decoration?

1: In terms of the amount of personal home decoration, the carbonized wood that can be purchased can generally only be the size of the specification, because the carbonized wood is not like the floor has a groove, so the force can not be distributed laterally, and after carbonization, it will lead to a decrease in toughness and an increase in brittleness (reduced flexural strength), which means that in the case of keel pavement, a smaller keel spacing is required, or thicker and wider specification materials. This directly leads to an increase in costs.

2: The large-scale use of carbonized wood needs to maintain the gap between the boards, because of the harsh use conditions of the outdoor floor and the unit cost limitation (wood selection, dryness, etc.), so that the carbonized wood also adopts the most original and effective method to retain the gap to solve the deformation problem. Obviously, keeping gaps in a home environment can cause a great cleaning problem.

3: Carbonized wood is plain board, no surface treatment, according to the standard of interior decoration for post-surface treatment will cause a significant increase in cost, outdoor use can take some low-cost, anti-pollution effect of general products, and indoor is unacceptable, can you imagine the cleanliness of the carbonized wood floor in the park at home? 4：

Wood is priced in cubes, whether it is a household floor manufacturer or an outdoor floor manufacturer, the procurement of raw materials is so, the same variety and grade of wood ** is consistent, the processing cost of indoor flooring is higher than that of outdoor flooring, closing stores, advertising and other factors, the unit gross profit is also higher than that of outdoor flooring, so it seems that the same wood of home decoration flooring ** is much higher, but if you choose outdoor flooring to achieve the comprehensive applicability of home decoration flooring, later because of small scale, The direct economic cost and time cost caused by multi-step construction often lead to an increase in the total cost instead of falling. 5: Over the years of the market has formed a home decoration floor style to choose a lot, and what you see is what you get, very intuitive, and the final form of carbonized wood and other outdoor flooring is greatly affected by later factors, as the intuitive impression of ordinary consumers is difficult to accept rough and unformed outdoor flooring, and as a designer although you can predict the final effect through experience, but there is no designer willing to do a complex process, low profits, and customers are not necessarily accepted by the unknown product.

6: To achieve the same stain resistance and accuracy, the comprehensive maintenance cost of outdoor floors such as carbonized wood is higher than that of general home floors. 7：

If you like the rustic effect of carbonized wood, in fact, there is no need to use carbonized wood, many cases have the ground made of old wooden boards, not to mention wear resistance, stain resistance, not to mention precision at all, because the appeal is completely different, the appeal is different, then there is naturally no comparison.

Defects of charred wood flooring. Insect damage: Because of the bite of insects in the wood, piles of powder can often be seen on the surface of the charred wood floor, which is annoying.

The reason is related to the selection of flooring materials. In order to prevent insect moth, the first is to buy the floor produced by the drying kiln spray steaming process, although the price is more expensive, but all the insect eggs in the wood have been killed; The second is to carefully select the keel, where there are insect eyes or bark are not used. Slitch:

Some floors have been laid for several days, and large gaps have appeared between the slats. This is mostly related to the high moisture content of the floor before laying, which shrinks due to high indoor temperature or air drying. Note that the moisture content of the floor before laying is in the range of 8%-13%, and it should be oiled in time after paving.

Noise: Due to the low quality of the flooring, people will find a squeaky sound when walking on it, which is uncomfortable to hear. For this reason, it is necessary to pay attention to the strong connection between the keel and the ground, the floor and the keel, and the appropriate number and length of nails.

At the same time, it is necessary to prevent the keel spacing from being too large or the moisture content is too high, otherwise it will dry and shrink loose after laying, which will also cause a certain impact. Flower face: Slats of the same tree species are used, and there is a large difference in color.

If it is not laid properly, it is very easy to show a "flower face". When using varnish natural color flooring, especially the slats of tree species with great color differences, you should consider the selection and blending of slats, so that the color of the floor is gradually transitioned from light to dark, or from deep and shallow.

Drumming: Some floors are swollen by moisture after being paved. This is mostly related to the environment around the floor, especially the foundation is too wet or the floor is flooded.

The reason why it is rarely used indoors may be due to the fact that users have bought some fake carbonized wood, and the real carbonized wood is also regarded as fake, in fact, it is not difficult to distinguish between true and false carbonized wood, I will tell you how to distinguish between real and fake carbonized wood: real carbonized wood is 190 degrees Celsius 212 degrees high temperature oxygen-free carbonization, and the wood has a faint woody burnt smell, False carbonized wood, that is, boiled carbonized wood, is through a high temperature water vapor of about 120 degrees, which is equivalent to dyeing wood, and does not destroy the structure of wood, consumes its nutrients, and has a very strong sour smell, It is easy to mold, blacken, deform, crack, and rot after use. There is also a kind of surface carbonized wood barbecued with an oxygen welding gun, so that the surface of the wood has a very thin layer of carbonization, the change of wood performance can be analogous to the paint of wood, but it can highlight the concave and convex wood grain on the surface, and produce a three-dimensional effect.

The application aspect is concentrated in handicrafts, decoration materials and aquarium products. It is also known as craft carbonized wood, charcoal burnt wood.

The use of carbonized wood in home decoration indoor flooring has risen in the last three or four years, and now it is still relatively used in home decoration.

Carbonized wood can be divided into surface carbonized wood and deep carbonized wood. Surface carbonized wood is generally grilled with an oxygen welding torch to form a thin carbonized layer on the surface of the wood, which is commonly used in handicrafts and decoration materials. Deep carbonized wood, also known as fully carbonized wood, is treated by high-temperature carbonization technology of about 200 degrees to make it have good anti-corrosion and insect-proof properties, and is a real green and environmentally friendly product.

Reasons why Tan carbonized wood is not often used in home decoration:

1. Carbonized wood is not like the floor with tongues and grooves, so the force can not be dispersed horizontally, and the carbonized wood is reduced and brittle increases due to the reduction of toughness after carbonization, and the keel pavement requires smaller spacing, and the material requirements are thicker and wider.

2. If it is a large-scale use of carbonized wood, it is a problem to maintain the gap between the planks, and cleaning.

3. Carbonized wood is a plain board, the surface has not been treated, the cost of the later stage increases, and the process requirements for paint should also be improved a lot.

Although the carbonized floor has no peculiar smell, it also lacks the pure natural fragrance of wood. X0D X0A3, the carbonized floor, although it retains the natural texture of the wood, but loses the natural color, the carbonized floor is often dark, the color is not as bright as other floors. Expert interpretation: Experts say that carbonized flooring is the result of the flooring industry'cooked'Carbonized flooring not only solves a number of problems of wood flooring, but also increases the service life of the floor to 20 years.

At present, the global floor carbonization technology is still in its infancy and has not yet matured. At present, the market is still dominated by carbonized parquet, the surface layer is carbonized, and the base material is solid wood.

Because fir is not a hardwood (compared to oak, beech, maple, etc.), it has low stability and insufficient strength when used as a floor, and its paintability is low, and it is much less durable than hardwoods commonly used in flooring.

Carbonized wood has the advantages of low water absorption, anti-corrosion and insect resistance, highlighting the texture of wood grain, and high machinability.

Carbonized wood is mostly processed with spruce, which itself is a relatively economical and stable yield of commonly used wood. It is mostly used for structural frames (such as when used as a wood frame house), and is mostly used for wood floor base (frame), furniture frame partitions, etc. in interior decoration projects.

Carbonized wood is not preservative wood.

Carbonized wood is expensive, and antiseptic wood is toxic.

It's still cost.