HOW TO MIRROR IPHONE TO IPAD

AirDroid Cast can be used to achieve screen mirroring between iPhone and iPad. Here's how:

Make sure your iPhone and iPad are connected to the same Wi-Fi network.

Turn on AirDroid Cast on your iPad and select [Receive Screen Mirroring].

On your iPhone, open AirDroid Cast and enter the casting code on your iPad.

Wait for a few seconds and your iPhone screen will be cast to your iPad.

During screen mirroring, you can see the screen of your iPhone on your iPad just like you are on your iPhone. This is great for displaying content on your iPhone on a big screen, such as ****, presentations, etc. If you want to stop screen mirroring, go back to your iPhone's Airdroid Cast, tap the "Pause Mirroring" option, or disconnect Screen Mirroring.

The mirroring function is to display the entire picture on the screen of the iPad and iPhone to the TV, just like looking in a mirror.

iPhone, iPad built-in A5 or above chips, all support the mirror function, which is a function that comes with iOS. The A4 chip only supports AirPlay, not mirroring. Airplay is to display **,**,** to the TV.

On your iPhone, open "Settings" "Control Center" "Custom Controls" Add "Screen Recording".

Open the ApowerMirror APP on your iPhone and iPad, tap the blue "M" button in the middle of the screen on your iPhone, wait to search for the device, and select Apowersoft to start with [Your iPad Device].

Swipe up on your iPhone or swipe down on the upper right corner to pop up the control center, press the "Record" button hard, click "ApowerMirror" and "Start Live Stream", and then your iPhone will be successfully cast to your iPad.

iPad Introduction.

Apple iPad

It is written by British-born design director Jonathan Ive

Designed by the team led by Jonathan Ivey, this sleek, ultra-thin product reflects Yves' reverence for talented German designer Dieter Rams.

The iPad is developed by Apple.

Tablets that were released in 2010.

series, positioned between Apple's smartphones, iPhones and laptops.

Between the products, (there are 4 virtual program fixed bars on the screen) as in the iPhone layout, providing functions such as browsing**, sending and receiving emails, **e-books, **audio or**, playing games, etc.

It's very simple to use AirDroid Cast to cast to a tablet on your iPhone, just follow the steps below.

Then, confirm that the mobile phone and tablet are connected to the same wifi network (LAN screen projection is free, remote can also be, you want to be a member), so that the two mobile phones can complete the setup of screen transmission between each other;

Open the AirDroid Cast app on the tablet, select the screen mirroring interface, and you can see the screen dropping code connected to 2 screen projection devices.

Next, the iPhone only needs to open the AirDroid Cast app and fill in the projection code in the input box;

In the end, both devices agree to project the screen, and the screen content of the Apple mobile phone can be projected to the tablet, that is, the same screen function of the mobile phone and tablet is realized.

The above is the complete tutorial on how to use Airdroid Cast to cast the screen to the tablet on the Apple phone, which is very simple to use, but it should be noted that the wifi network of the mobile phone and the tablet needs to be the same network to be able to project the screen for free. Free to use.

There is no way to mirror the iPad, because if it is mirrored, it can only be mirrored to the computer or TV, and it must be in the same WiFi state. For example, if it's a TV,Then you can directly open the mirror,You can click to connect after searching for TV。

Connect both devices to the same wireless network at the same time. Then select the mirror projection push function at the bottom of your iPhone. In this way, you can directly select the name of your iPad device in the list, so that you can mirror the screen.

2.Connect the Wi-Fi network of your tablet and mobile phone to the same network.

3.On the phone you want to cast, tap Custom controls in Settings.

4.Then you need to add a project, the screen recording function, click to add.

You can log these two devices into one Apple at the same time, and then select the sync function between Apples, so that the two devices can be fully synchronized.

First of all, you need to install Airdroid Cast projection software on your iPhone and tablet, search for and **AirDroid Cast on the App Store. After installing AirDroid Cast, we can start using it for screen casting.

First of all, on the tablet, select [Receive Screen Cast], at this time, you will see a set of screen casting codes and ***.

Next, launch the AirDroid Cast app on your iPhone, enter *** on your tablet, and then click the "Cast Screen" button to <>

Then click "Agree" on the iPhone and tablet to display the content of the phone's screen projection on the tablet.

If you want to turn off screen mirroring, you only need to close the AirDroid Cast app, or turn off the AirDroid Cast of another mobile phone.

It can be mirrored to the iPad.

2. Connect the wifi network of the tablet and the mobile phone under the same network.

3. On the mobile phone that needs to be projected, click the macro sell custom control in the settings.

4. Then you need to add a project, the screen recording function is blocked, click to add.

<>6. Finally, open the control center on the phone, press the "Screen Recording" button diagonally downward, click ApowerMirror and click the Start Live Broadcast option, wait for a few seconds, and the iPhone device screen will be projected to the iPad.

The screen of your iPhone can be mirrored to your iPad. The screen of the iphone is not big,Usually we will project the content of the Apple mobile phone to the TV,Experience a different ** effect,In fact, the Apple mobile phone can also be cast to the ipad,Some netizens don't know how to cast the screen of the iphone to the ipad,The following brings you the operation steps of the Apple mobile phone to the iPad。

1.You need to **AirDroid Cast and install it on both iPhone and iPad devices, or you can search for it in the Apple App Store and install it.

2.Connect both iPhone and iPad devices to the same Wi-Fi network.

<>AirDroid Cast can not only realize mutual projection on mobile phones and tablets, but also realize mutual projection between computers and mobile phones and tablets. The shirt is scattered.

1. If you want to set up the mirror projection function in the iPad, you first need to slide the screen of the iPad with your finger.

2. At this time, the [Control Center] dialog box will appear on the right side of the screen of the iPad, and then click [Screen Mirroring] in the dialog box.

Function. <>

3. At this time, in the [Screen Mirroring] dialog box, a device that can be quietly cast will appear, and then click the device you want to cast the screen on.

4. After the device is successfully connected to the screen projection, the screen will be successfully projected to this device, and the symbol of successful connection will be displayed in the [Screen Mirroring] dialog box.

<>6. If you want to exit the mirror projection, click the [Stop Mirroring] function in the [Screen Mirror Bright Socks] dialog box, so that the mirror projection will be successfully exited.

Two MirrorOp iPhone iPad Sender (mirror transmitters) are required on iPhone and iPad. Install the MirrorOp iPad Receiver on the iPad. Then the two devices are in the same LAN wifi environment, first open the ipad receiver, and then open the iphone transmitter to see, the ipad receiver ip is displayed, select this ip, and then click start to start, the iphone screen will be projected to ipad.

This connection method does not require any cable connection, and the transmitter and receiver of MirrorOp support a variety of platforms, such as iPhone, iPad, and Android.

Cast to PC, Mac, iOS, Android, and other devices.

If you're talking about using screen mirroring with an Apple phone and an Apple iPad, then it's OK, no problem.

Mobile phones and iPads can screen mirror, and it has this feature.

Swipe up from the bottom of the iPad to open the control center, click Screen Mirroring, and select the device that needs to be delivered, note that the iPad and the device that needs to be mirrored must be in the same LAN to be realized.

Do you know how to cast the TV screen? First of all, you have to say that your mobile phone and TV are connected to the same network environment,If you are an Apple system,You need to use the screen mirroring function that comes with the system,If you are interested, let's learn about it with Qiji!

Internet. First confirm that your TV is connected to the network,Then open the TV or box"App store",Enter in the search bar"lbtp"The first pinyin,Select,Press confirm in the remote control and press confirm to install,In addition, you can also use this software on the computer**Good,Copy toUdisk,Install to TV through Udisk。

iOS system.

If you want to cast the screen of the iPhone, you need to use the screen mirroring (AirPlay) function that comes with the system.

iOS screen mirroring.

The specific operation method is to connect the network of the mobile phone and the smart TV to the same wifi - call up the control center of the iphone or ipad - click on the screen mirroring, then you will find that there will be a TV below (if you use a box, the box will appear) The words - click to connect (ps.Control Center Recall Screen Mirroring is only available for users who have upgraded iOS10 and iOS11, users below iOS10 can go to Settings to find the screen mirroring feature in iOS9 Control Center.