How do you refill ink on Samsung printers? How to change ink cartridges on Samsung printers

Open the front cover, there is a black handle inside, pull it out, take out the integrated magnetic drum, unscrew out the two screws of the right end cover, gently remove the end cover, you can see a round plastic cover, slowly pry it open, and then add toner to it.

After adding, cover the plastic cover, install the end cap, tighten the screws, push it into the printer, and cover the front cover. Add toner to finish.

1. Push open the spring lid of a black box attached to the toner cartridge 2 and pour out all the remaining toner. (Don't be a pity, the static electricity and diameter of toner from different manufacturers may be different, and mixing them together will damage the toner cartridge) 3. Make a funnel with clean white paper and add the toner, about 1 bottle (100g). 4. It's OK to put it on.

1. Check whether the newly purchased printer cartridge is suitable for your printer model. The outer packaging of the compact often has the printer model suitable for the compact, check whether it matches your own printer model.

2. Before loading the toner cartridge into the printer, remember to remove the protective cover of the toner cartridge. Method: Without screws, pull both ends along the opening direction at the same time to remove it directly.

3. Power off the printer, you can unplug the power cord, or press and hold the power button. Lift the printer cover upwards at the illustrated point to reveal the printer's cardboard.

4. Grab the two places of the icon with both hands, lift the feeding cardboard upward, so that the feeding cardboard and the upper cover of the printer are combined together, leaving a large gap at the bottom to expose the old ink cartridge.

5. Grab the handle of the old ink cartridge according to the direction shown in the diagram and pull it upwards and outwards to take out the old ink cartridge, paying attention to the top and bottom of the ink cartridge.

6. Put the new ink cartridge into the printer, grab the ink cartridge handle, press down hard, and hear a "click" sound, and the new ink cartridge is installed in place.

7. Cover the cardboard and cover in turn, turn on the power supply, and the printer can be used.

The Samsung printer adds powder under the transparent plastic cover on top.

As a pioneer of the Wi-Fi printing boom, Samsung has been committed to discovering and meeting the various office needs of Chinese users, and its Wi-Fi wireless printing products have fully covered black and white laser printers.

The black and white all-in-one machine, color laser printer, and color all-in-one machine are functionally enough to meet the office needs of different users.

Samsung printer product features:

Cost-saving, easy, one-click economical printing allows you to do it all in one simple step, reducing toner, paper and power consumption while saving on printing costs. Once you have selected Economy Print, it will automatically become the default.

Optimize your printouts with Samsung's economical drive, with this efficient software, you can get a precise preview before printing, adjust print quality, color, and other settings to meet your specific requirements and budget, and delete unwanted text, **, and other files. Savings including paper, toner, energy consumption, and overall costs can also be monitored, resulting in a more environmentally friendly and efficient travel based printing experience.

Simple and efficient, use easy print management software to manage printing tasks simply and efficiently. This easy-to-use, integrated EPM software can quickly boot up your device and monitor print status, so you never have to worry about your device running out of toner.

Samsung 4521 printer powder method:

1. Remove the screws to open the powder cover of the Samsung printer. Then use a fan to clean up the dust inside. The powder we want to add is put in this warehouse, just add your corresponding model of powder to it, but remember to blow the original powder before adding powder, it is best to blow it with a small fan, never blow it with compressed air, compressed air contains too much water is not safe.

Second, then we will dismantle the waste toner silo.

There are two screws on the left and right sides of the waste toner bin to blow the ink on it clean.

3. Remove waste powder.

If you don't clean it up, it will be too full when you put it in the new powder.

Fourth, according to the above steps to install the drum, put the drum on the printer for testing.

There are many printers, there is such a situation, and even if the printer is full of powder, the amount of powder will be low, at this time you can ignore it, generally speaking, this will not affect the use of your printer.

How to clear the Samsung 4521 printer after adding powder:

Resolution. 1: Press Menu 1934 (Quick Press to finish) The screen will display the menu with Tech letters, and the left arrow will display New Cartridge, click OK.

Samsung 4521 printer toner cartridge powder is exhausted, after adding powder, if it still prompts "powder and ink exhausted", printing and copying is normal, but the printer function cannot be used, only in the memory receiving state, use the following method.

Press [Menu], then press Enter 1934 (this action needs to be completed in 2 seconds), and the English interface will appear (if it is not displayed, repeat the attempt). Then select [new cartridge] and press [Confirm] twice to shut down and restart, and return to normal!

The first method of opening the hole to add powder is simple and fast, but it also produces many problems, the Achilles heel is that it cannot remove the powder, nor can it check and clean the internal parts of the toner cartridge. Although it is possible to open a hole in the powder, but the seal is not tight, it will cause the toner cartridge to leak, and the number of times you add it can not be too much, I don't think this method is still necessary for seconds, because there is a problem and the toner cartridge must be opened in the end.

The second method of disassembly and powder addition is the most common. Disassemble the toner cartridge, take out the drum core first, and then take out the cleaning stick, and you can see that there is a pin for connection at each end of the toner cartridge.

This question is up to me, it takes a little time to type, so please be patient.

1. The position of various vents on the ink cartridge is the entrance to fill the ink, you can find the air hole corresponding to each color in the ink cartridge without tearing the color label, you can pierce it with a needle tube, ordinary needle tube, and push the ink with a syringe.

2 At the same time as the first step, we must exhaust as much as possible when adding ink, the top of the ink cartridge is to inject, the bottom is discharged, the pressure is one large and one small, to effectively fill the ink, if the air below is difficult to discharge, you need to put the lower port plane on the ground.

3. After the commonly used maximum filling volume is about 54 grams, that is, the maximum filling volume is about 26 ml; The empty cartridge is about 34 grams, and the filling is about 58 grams, that is, the maximum filling volume is 8 ml per color, but in practice it is still a little less.

4. There is a color indicator label on the ink cartridge, please put the paper on it in time after pulling out the needle.

5 If you don't have a needle tool, and you don't want to buy a tool or can't buy it, you pour some ink on the plate, just put the ink cartridge in the ink, let the nozzle soak down for a while, you can also fill the ink.

6.The filled cartridges are finally installed on the machine in place. When the current printer is empty, there will be a prompt, the printer's light will be on, and when there is no folded line when the print is printed, it is successfully filled with ink.

1.Prepare the toner and open the printer panel to remove the toner cartridge.

2.There is a hole on the front of the toner cartridge to open the hole cover and pour out the waste toner first.

3.There is another hole on the side of the toner cartridge is the powder filling port, open the lid to add powder, close the lid after adding and shake the toner cartridge left and right with your hand to make the toner in the toner cartridge evenly distributed.

4.Put the printer back in and push it all the way down. Cover the panel.

We hope we can help you.