After the Redmi Note runs out of power, it can no longer be turned on when it is fully charged, and

Dear users, hello:

If you can enter recovery, you can double clear (double wipe), double clear does not flash the machine; You can't just "save bricks".

Enter Recovery Mode Method:

Method 1: If the phone is turned on, please turn it off first, remove the battery and then put it on, and in the case of power off, press and hold the power button + home button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

Recovery flash, the steps are as follows:

Flash the ROM from the corresponding mobile phone on the Internet, and then copy it to the root directory of the SD card, the ROM is in ZIP format (you can open it to verify it, the ZIP package must have meta-inf This folder is the flash package, but do not change the files in the ZIP package), do not unzip. After the copy is complete, you can disconnect the phone and the computer.

Shut down the computer completely (it is best to pick the battery after shutting down), and then enter the recovery interface through the special button combination.

Select Wipe Data Factory Reset and press the power button to confirm, then press OK with yes. Then select Wipe Cache Partition and press OK, and select Yes to OK. (This is the legendary double WIPE, friends who know about flashing must have heard of it). (If it's just double clearing, stop at this step).

Select the fifth option, install zip from sdcard, press the power button to confirm, then select choose zip from sdcard, press the power button to confirm, then select the rom to flash the file, press the power button to confirm, and then select yes and press the power button to confirm to start flashing.

After brushing, that is, the interface after the progress bar is finished, return to the main interface of recovery. At this time, select Reboot System Now and press the power button to restart the phone. The first reboot takes a long time, so be patient! That's the end of flashing.

1. Caused by hardware failure. Try to enter the recovery mode first, turn off the computer first, press the volume and power button to enter the recovery mode;

3. In the shutdown state, press and hold the volume up and the power button at the same time to turn on the machine, the screen is lit up, release the slow power button to keep the long disturbance, and press the volume button to enter recovery mode;

4. Select Chinese Simplified and confirm, select the power button for volume button to confirm, select install update to the system and confirm;

5. Select Confirm and wait for completion, and then select Restart to the system to enter the new system;

6. If there is still no response on the phone, it is a hardware failure. Bring your mobile phone, invoice, and warranty card to the local brand customer service for testing.

The Redmi Note phone BAI cannot be turned on normally and cannot be charged, which may be caused by a hardware DAO failure.

Expert. The user can try the next energy first.

If you want to enter recovery mode, you need to shut down the computer first, and press the volume and power button to enter recovery mode.

In the power-off state, press and hold the volume up + power button at the same time to power on, the screen lights up, release the power button, and keep pressing and holding the volume button to enter recovery mode.

Select Chinese Simplified and confirm, volume key select Power key confirm, select Will install to system and confirm.

Select Confirm, wait for completion, and select Restart to system to enter the new system.

If the mobile phone still has no response, it must be a hardware failure, it is recommended that the user bring the mobile phone, invoice, warranty card to the local brand customer service for testing.

After the phone is detected, the customer service will inform the user of the cause of the failure.

The warranty period of the mobile phone is 1 year, if the mobile phone is under warranty and is a natural failure, the after-sales service is responsible for the warranty.

If it is out of warranty or caused by a man-made fault, then you can only pay for repairs.

Hello. In this case, it is recommended that you go to the nearest Xiaomi Home or Xiaomi after-sales service to let the engineer help you test it. Appearance.

If it is within the "three guarantees" policy, it will be repaired to you free of charge.

The following is the query of Xiaomi Home and Xiaomi after-sales outlets. Mi Home address inquiry, Xiaomi authorized repairer outlet address inquiry.

Contact Xiaomi after-sales service, return or exchange.

What should I do if the Redmi Note won't turn on.

If the phone turns off automatically due to insufficient power due to excessive use, and there is no response or cannot enter the desktop when it is turned on again, then it can be determined that the phone battery has entered a dormant state due to excessive discharge. At this point we need to take out the Redmi Note mobile battery.

The battery is then charged with a "universal charger", which again compulsorily activates the battery and returns it to normal use. When using universal charging, make sure that the positive and negative poles of the battery are connected correctly.

Wait for the charging to complete, install it in your Redmi Note phone and try to turn it on again.

There is also a reason why Redmi Note does not get into the desktop due to improper installation of the software, for which we only have to do a factory reset. When the phone is completely turned off, press the "Power Button" + "Volume Down Button" at the same time and hold it for a while, the following screen will appear, select "Recovery".

mode" and enter.

In recovery mode, the volume down button represents "Select" and the volume up key stands for "Confirm").

When the "Green Robot" interface appears, press the "Power Button" to enter.

Then select "Wipe."

data/factory

reset" item and press "Volume Down" to confirm.

After the factory reset is complete, select "Reboot."

system

now" to restart the phone and enter the desktop normally.

What to do if your Redmi phone won't charge.

Restart your phone, and sometimes, after your phone restarts, it may fix the issue.

End Method Step 2

Turn off the phone, wait for a while, cut out the electric board, and put the phone for a while, do not charge it at this time.

2. Take out the mobile phone ** card, and use the official charger for direct flushing at this time, about 30s-1 minutes.

3 Then unplug the straight punch, put the mobile phone board back into the mobile phone, ** put the card back, it should be able to charge.

4 If it is not resolved, it is recommended to try again a few times.

Charge with the universal first, flush away, and then use the data cable.

Go to the after-sales service to test it.

Probably bai

The battery is dormant if.

1.It does not need to be fully charged for 12 hours, the lithium battery can be charged as you go, it is recommended that you disconnect the power supply after it is fully charged.

2.It is best to turn it off and charge.

3.Try not to drain the battery and turn off the phone automatically, over-discharging may cause the battery to sleep.

4.If you do not use the battery for a long time, please store it in a dry and low temperature environment.

Xiaomi phone battery.

1.The Redmi bainote phone can't turn on normally and can't be charged, which can be done by dao

Caused by hardware failure. Edition.

The first thing to do is to determine what state the phone is in, maybe it's dead, so restart it. Take out the battery and put it back on, or press and hold the power button for about ten seconds to try.

Then it is necessary to know whether the phone battery is charged. After charging for two hours, restart and try again.

Or try a new battery.

My phone ran out of power, and then it turned off automatically, I thought it was nothing, so I took it to charge, and then charged it, I couldn't turn it on, and I couldn't charge it, I couldn't turn it on, what should I do.

It takes 3 or 4 hours to charge before you can try to turn it on, and it is not possible to turn it on without power.

There may be a problem with the motherboard, please go to a repair center near you or Mi Home to check it.

Repair point address and ** inquiry.

Mi Home address inquiry.

This problem is generally due to the inability to turn on the mobile phone battery due to battery damage, and the following is the general solution:

1. If the purchase is not more than half a year, then the battery can be warranted, and the after-sales warranty is carried out before.

2. If the machine is purchased for more than half a year, then it can only be repaired at your own expense.

3. Try to charge the phone for 30 minutes and then try to turn it on to see if it is caused by abnormal battery.

When encountering the situation that the mobile phone cannot be turned on, there are mainly the following situations:

1. The battery power supply circuit is not turned on due to poor operation.

2. The software is not normal and the computer is not booted.

It is recommended to go to Xiaomi Home or return to the factory for repair and inspection, thank you.

It should be a crash, disassemble the battery and try to press it.

This is estimated to be a system issue with Redmi's phone.

If it still can't be turned on after 10 minutes of charging, then you need to flash the computer to try.

If there is no response when connected to the computer, then you have to send it for repair.

What are you doing on your phone?