Which tile is the most economical? Which brands of ceramic tiles are affordable and of good quality

Different kinds of ceramic tiles have different properties and have their own advantages and disadvantages, which cannot be generalized. It mainly depends on where you use it, and choose different tiles according to the characteristics:

Polished tiles. Polished bricks are durable, hard, wear-resistant, clean and bright, except for the kitchen and bathroom, which require high anti-slip performance space, other indoor occasions are applicable, relatively low, save money, and the quality is practical.

Fully glazed bricks. It has good anti-fouling and anti-slip properties, general wear resistance, and is generally suitable for indoor use, and the price is relatively low.

All-over bricks. The all-body brick is an upgraded version of the all-glazed brick, which has passed the anti-fouling, anti-slip and wear-resistant properties, and can also choose matte and bright light, the price is slightly more expensive than the first two, but the cost performance is higher.

Glazed brick is the surface of the brick after the glaze treatment of the brick, and it is divided into two kinds: clay and porcelain clay, the back of the clay fired is red, and the back of the porcelain clay fired is gray-white. Because the surface is glaze, it is not as wear-resistant as polished tiles.

The lowest is not easy to say, the tile does not have to be the best and most expensive, but it can not be too cheap, not a small factory, add a lot of chemical raw materials, radiation is very large, choose a large factory, you can see Likai tiles.

According to the production process and characteristics, ceramic tiles can be divided into: glazed tiles, full-body tiles, polished tiles, vitrified tiles and mosaics. Glazed bricks refer to bricks whose surfaces have been glazed, mainly used in kitchens and bathrooms.

The whole brick is made of rock chips after being pressed under high pressure and then fired, and the biggest feature is that it is not glazed and the material and color of the front and back are the same. Polished bricks are actually bricks made by grinding and polishing the whole brick, which can make various imitation stone and imitation wood effects.

One: Marco Polo tiles

China's well-known trademarks, Guangdong famous trademarks, top ten ceramic tile brands, top 500 value brands, as early as in the market famous. The quality is very good, and the environmental protection is also good.

Two: Dongpeng tiles

China's well-known trademark, Guangdong Province famous trademark, one of the high-tech enterprises in Guangdong Province, one of the top ten brands of ceramic tiles, Dongpeng is a leading enterprise in the domestic ceramic tile industry, product update fast design ability comparison. The product has been imitated by the industry, and the reputation of consumers is also quite good.

Three: Nobel tiles

Nobel is a high-tech enterprise in Zhejiang Province, a famous trademark in Hangzhou, the degree is not small, in addition to the development in Zhejiang, Nobel ceramic tiles also go to the whole country, and even enter the international market, the sales network continues to expand, occupying a certain market share. The polished tiles in Nobel tiles are very good, if you particularly like polished tiles, then choose Nobel tiles.

Marco Polo tiles are better.

The Marco Polo brand was born in 1996 and has a very strong corporate strength. It is the most complete brand of domestic ceramic products. The company has more than 380 patents.

And combined with Chinese culture, the essence of Chinese culture is displayed on the tile, Marco Polo tile with oriental characteristics was born.

With independent research and innovative design of the Chinese impression series of ceramic tile products, the Chinese ceramic culture and tradition are displayed in this series of ceramic tile products, once the series of products launched, it has been loved and sought after by consumers.

Marco Polo tiles are more suitable:

Precautions for buying tiles:

1. Polished bricks are relatively wear-resistant, but also cheaper, the color of polished bricks is relatively single, and the color is relatively less, and the glazed bricks are glazed on the basis of polished bricks, with rich colors and textures, and high appearance, and now 80% of families will choose glazed bricks.

2. There are many colors of tiles, different styles choose different colors, this depends on personal preferences, such as black, white and gray is more versatile, and Morandi color is warmer. However, when purchasing, pay attention to the color difference of the tile color.

There should be no this, you should know that the current products are worth a penny, and if the benefits are cheap, it is difficult to achieve better quality.

Answer 1, Marco Polo is very well-known in the ceramic tile industry, is a famous trademark in Guangdong Province, China's famous brand, Marco Polo this brand is also the most ** brand top 500, belonging to Guangdong Marco Polo ceramics ****; The brand awareness is very high and it is very popular in the market.

2. Mona Lisa Mona Lisa is a brand of Guangdong Mona Lisa Ceramics, the company is a national key high-tech enterprise, Guangdong famous brand, and has a certain status and popularity in the ceramic industry; In 2014, after an actual investigation, Mona Lisa still landed on the top ten brands list with strong strength, continuing the achievements of the top ten brands.

3. The champion is a famous brand in Taiwan, a well-known brand in the industry, the champion is the first brand of Xinyi Ceramics (China), China's 500 most advanced brands, and the champion has won this honor many times in the top ten brand rankings; Its products have also been welcomed by the market.

Question: I think which second- and third-tier brands are better.

1. Romario, Europe and the United States, Tere, Vero, Qiaodong, Hongtao.

The ceramic tile ** is naturally not cheap, in addition to paying attention to the brand when purchasing, you should also learn the following practical selection methods:

1.When purchasing ceramic tiles, you can ask the merchant to provide the relevant test report and certification certificate issued by the authority to avoid buying inferior products.

2.When purchasing ceramic tiles, you can extract four or five pieces from the same batch to observe whether there are defects such as color difference, deformation, lack of edges and corners, etc., and the surface finish and flatness of ceramic tiles are high, the surrounding rules and patterns are complete.

1912 followers.

Because the home needs to be renovated, it is all done by yourself. So after the renovation, I learned a lot about the materials, and next, I will introduce it to you.

Tiles can be divided into these six types: mosaic, polished tiles, antique tiles, glazed tiles, full-body tiles, and vitrified tiles.

Full-body brick: Full-body brick has an advantage that has to be said, that is, its anti-slip performance is particularly good. Generally, the non-slip bricks we know are this kind of full-body bricks. It's the same on both sides.

This kind of tile is also cost-effective, which is considered to be inexpensive.

Polished brick: To put it simply, polished brick is actually a brick made after the surface has been polished. The polished tile material is relatively hard, which is suitable for many indoor places. But try to avoid restrooms and kitchens.

The advantage of polished tiles is that the quality is very light, and the general physical object is consistent with the first color. But the disadvantage of it is that it has poor slip resistance. So be cautious when buying.

Vitrified bricks: Although vitrified tiles also need to be polished, the difference is that it does not need to be polished, it is smoother, and the material is harder. In many ways it is much better than ordinary marble.

It has the advantage of being more distinct in color, relatively safe in composition, and lighter in weight for easy cleaning.

Glazed brick: its ** is relatively high, it is worth mentioning that its stain resistance is relatively strong, so it is especially suitable for use in bathrooms, kitchens and other places, easy to clean.

Antique brick: As the name suggests, it imitates the ancient, the style is more retro, the American style is more American, and the overall atmosphere is more atmospheric and calm.

Mosaic: Presumably, it may be because mosaics don't look very high-end, so they are often used in places like bathrooms haha.

To sum up: in fact, decorating a house is a comprehensive thing, it has to combine all aspects, such as your preferences, your income, and so on. You can't blindly listen to other people's introductions, after all, what suits you is the best.

Choosing your favorite tiles is the key! As long as you can buy ceramic tiles, you don't have to be a big brand to choose cost-effective!

The principle of purchasing ceramic tiles is: one look, two listens, three drops of water, four feet, and five observations.

1.Look at the appearance. The color of the tile should be uniform, the surface finish and flatness should be good, the surrounding rules should be regular, the pattern is complete, and four or five pieces should be extracted from a box to see if there are defects such as color difference, deformation, lack of edges and corners.

2.Listen to the sound. Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality.

You can also clip the corner of the tile with the thumb, index finger and middle finger of the left hand, hang down easily, and tap the middle and lower part of the tile with the index finger of the right handDrip test. You can drop water on the back of the tile to see how fast the water soaks after it spreads, generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior.

4.Measurements. The higher the accuracy of the side length of the tile, the better the effect after paving, and buying high-quality tiles is not only easy to construct, but also can save man-hours and accessories. Use a tape measure to measure whether there is a difference in the size of each tile, and the high accuracy is the top grade.

5.Observe the hardness. Ceramic tiles are of good hardness, strong toughness and not easy to be broken and rotten.

The edges and corners of the tile fragments are scratched on each other, and the broken fragments are inspected to see whether the broken parts are fine or loose, whether they are hard, brittle or soft, whether they leave scratches, or scattered powder.

The word economy is easy to understand, but what is affordable? If it is used in a restaurant, it is generally considered that the amount of food is large. If it is used on tiles, then you can buy more for the same amount of money.

If this is the case, it must be those cheap bricks that are not famous, of average quality, and much larger than those produced in Shandong.

Floor tiles, Aoshida's is not bad, affordable, my family used this floor tile when decorating in March this year, the master said that this floor tile is not bad, the most important thing is that it is not expensive! Recommended.