What are the consequences of the water being too hot and continuing to boil?

There is a risk that the water pipe will rupture, which may cause antifreeze leakage. The continuous high temperature of the engine will cause the engine to pull the cylinder, and the most serious will also reduce the performance of the engine, and even scrap the serious consequences. Therefore, when you find that the water temperature continues to maintain a high temperature, you should stop and check in time to see what is the cause.

The water temperature of the vehicle we see is too high, which is actually caused by the coolant not working normally, so we must pay attention to it, check that the problem appears, and eliminate the problem in time to continue driving. When the problem cannot be ruled out, it is necessary to contact the maintenance personnel for treatment, otherwise the water temperature will be maintained at a high temperature will make the engine in an abnormal state, and the most serious consequences will be the engine burning.

High engine water temperature treatment method

1. First of all, if you find that the engine water temperature is high during driving, you should first find a safe and cool place to pull over, let the vehicle idle and do not turn off, because the cooling fan and coolant circulation will stop after the ignition is turned off, which will make the engine hotter;

2. Then open the hood to increase air circulation, so that the water temperature drops, and then unscrew the radiator and water cover in one gear, and then open it after the internal water vapor pressure is completely discharged.

3. Check the liquid in the radiator, whether the fan is abnormal, and check whether there is any leakage in the connecting pipeline of the water tank, and then check whether the coolant is sufficient.

In severe cases, it is necessary to replace the cylinder block and cylinder head with a new one. The reasons for the high water temperature in the car are as follows:

1. The cooling fan is not **The cooling fan may be controlled by the temperature control switch, or it may be controlled by the water temperature sensor.

2. Insufficient cooling medium: antifreeze: high-end cars are required to be filled with antifreeze all year round; It can be used as a substitute for temporary water or distilled water.

Here's how to prevent your car from getting too hot:

Car owners should do a good job of seasonal maintenance in a timely manner during the change of seasons, and frequently check the cooling system to keep the parts of fans, radiators and other components sensitive. Before leaving the car every day, just in case, you can also check whether the water tank is short of water, and if you find that there is a shortage of water, you should fill it up in time. Car owners can also keep a bucket of water in the trunk in case they need it.

Hello, dear. We're happy to answer your <>

If the water temperature of the engine is too high to stop for a while, it is not possible to continue driving, because of the high heat generated by the engine operation, and the natural wind is difficult to meet the demand for a loss-resistant orange, if the temperature does not drop down and continue to drive, it will cause the water temperature to be too high and lead to the phenomenon of boiling, and it will also make the mechanical parts on the car expand, the gap between the parts becomes smaller, the soft metal falls off, and the cylinder operation is not coordinated and many other reasons, which is very dangerous for the driver in the car. We should pull over immediately, but don't turn it off immediately, let the engine run for a short time, and then find a way to cool it down.

Hello Yes, stop for a while, the water temperature will cool down, and you will be able to turn on. When the water temperature is too high, you should stop immediately and stop trying to continue driving. Because too high a water temperature can cause engine damage, which can aggravate the problem if you continue driving.

It is recommended to wait for the engine to cool down after stopping and wait for the water temperature to stabilize before continuing driving. After parking, you can first open the engine cover to let the engine heat dissipate and accelerate the heat dissipation. You can observe the water level in the water tank, if the water level is too low, add coolant and continue driving; If the water level is normal, check whether the water temperature sensor, water pump, radiator, thermometer and other parts are faulty, and repair or replace the faulty parts.

At the same time, you can also refer to the car maintenance manual or ask a professional car maintenance master for inspection and maintenance. [Smiling Antaga].

Hello dear, too high water temperature is a situation where the car breaks down, if the water temperature of the vehicle has reached the range of too high, it is the right thing to do to stop and cool down for a while. However, continuing to drive a vehicle without complete cooling can cause more serious problems, as hot liquids can form vapors inside the engine, causing engine bursts or other serious mechanical problems. Therefore, if the water temperature of your vehicle is too high, you should immediately drive your vehicle to a safe place and turn off the engine.

Then, wait for the vehicle to cool down completely to make sure the water pump and electric fan inside the engine have enough time to cool down. During cooling, you should carefully open the engine lid to prevent hot gases or liquids from escaping. When the engine is completely cooled, you can check the fluid level and correct any problems that are causing overheating, such as fluid leaks or faulty heat exchangers.

In conclusion, if the water temperature of the vehicle is too high, never try to continue driving until it has cooled down completely, which can lead to serious mechanical problems. It's best to park your vehicle upright in a safe place, turn off the engine and wait for the vehicle to cool down completely.

The consequences of the water temperature being too high and continuing to boil are:

1. The lubrication ability of the oil decreases, and the wear of the moving parts will increase.

2. Damage to the piston and cylinder, serious will cause the cylinder to be pulled, grooves appear on the surface of the cylinder, the engine power decreases, fuel consumption rises, and the engine oil is burned.

3. It will cause damage to the peripheral parts of the engine, such as timing chain guide rail, tensioner, etc.

4. Spontaneous combustion of the engine.

What to do when you encounter high water temperatures or alarms:

1. You must immediately pull over the roadside parking lane, turn on the double flashing lights and place a warning triangle after parking to remind the rear vehicles to pay attention to avoid (especially on the high-speed Xiangju Highway).

2. Do not immediately extinguish the fire, turn on the heater and air conditioner to the maximum gear, which can help the engine dissipate heat, because the cooling water pump is driven by the engine, if the fire is turned off, the water pump will stop, and the coolant will not be able to continue to circulate, which is not conducive to engine heat dissipation.

3. Open the engine cover and check whether there is any water leakage around the engine and water tank? If so, you can not continue driving, and at the same time check that the coolant in the auxiliary tank is too low, if so, you can add distilled water or purified water (tap water is not a big problem), and if you find that the water temperature returns to normal, then you can continue driving.

First of all, high temperature will cause the lubrication capacity of the oil to decrease, and the wear of moving parts will increase; Secondly, it will cause changes in the gap between the piston and the cylinder, damage the piston and the cylinder, and in serious cases, it will cause the cylinder to be pulled, the groove on the surface of the cylinder, the engine power will decrease, the fuel consumption will rise, and the oil will be burned. Again, it will cause damage to the peripheral parts of the engine, such as timing chain guides, tensioners, tensioners and other parts containing plastic materials. Finally, there is a risk of spontaneous combustion of the engine.

The car can't continue to drive because the water temperature is high. Under normal circumstances, the normal working temperature of the engine is about 90 degrees, which can make the engine have good power and economy, and at the same time reduce wear and prolong service life.

The engine temperature is too high or too low will cause: wear and tear, power decline and other phenomena, especially if the temperature is too high, if the engine is easily damaged if it works at high temperature for a long time, and even the engine will be scrapped in serious cases.

If you encounter high water temperature or alarm, you can first briefly check and judge: 1. The must-waiter must immediately pull over the roadside parking lane, turn on the double flashing lights and place a warning triangle after parking to remind the rear vehicles to pay attention to avoid (especially on the highway).

2. Don't turn off the engine immediately, turn on the heater air conditioner to the maximum gear, which can help the engine dissipate heat, because the cooling water pump is driven by the engine, if the fire is turned off, the water pump will stop, and the coolant will not be able to continue to circulate, which is not conducive to engine heat dissipation, and then continue to observe the water temperature gauge, if the temperature will not drop and then extinguish the engine.

3. Open the engine cover and check whether there is any water leakage around the engine and water tank? If so, you can't continue to drive the old stop fluid, and at the same time check whether the coolant in the auxiliary tank is too low? Yes, you can add distilled or purified water (tap water is not a big problem), and if you find that the water temperature returns to normal after adding it, you can continue driving.

If the water temperature of the car is too high and continue to drive, it will cause the deformation of the cylinder head and head gasket, and the deformation of the internal parts of the engine, or even the scrapping of the engine.

It is not alarmist, if this excessive heat is not dissipated in time and still continues to drive under high load, the wheel attitude will reduce the strength of pistons, piston rings, connecting rods and other components, and even deform; After that, the engine may not be able to bear the normal load, and at the same time, the engine temperature is too high will also destroy the normal clearance between the parts, so that the parts can not maintain the normal oil film of the right tomato, which will make the engine pull the cylinder and shoe, and the whole engine will be damaged or even scrapped.

Normal water temperature of the car:The normal car water temperature (essentially the temperature of the coolant) is the center of the water thermometer pointer - 90. Coolant is an indispensable part of the automobile engine, which circulates in the engine cooling system to take away the excess heat energy generated by the engine operation, so that the engine can run at normal operating temperature.

The full name of engine coolant should be "anti-freezing liquid", which has the characteristics of "anti-freezing in winter and anti-boiling in summer".