Can I continue to drive if the engine water temperature is too high?

The engine temperature is high and it cannot continue to be turned on, so it is recommended to turn on the heater at idle speed.

No. The water temperature of the car is too high to drive, first of all, park the car on the side of the road, do not turn off the engine immediately, idle for a few minutes, and then open the engine compartment cover, check whether the cooling fan is running, if not, see if the fan belt is intact, check the tightness of the belt, too loose or too tight will cause the water temperature to be high.

When the car is driving, it will always affect the driving because of various problems. It is precisely because of this that many novice friends want to know, does low water temperature have an impact on driving? Can you keep driving a car with high water temperature? So let's take a look at these two questions!

Does low water temperature affect driving?

When the water temperature is low, driving slowly will have no effect on the car, but if you drive violently when the water temperature is low, the impact on the car is very large. The reason why it is said that violent driving at low temperatures has an impact is that unburned gasoline will adhere to the throttle, cylinder wall or piston, so that carbon deposits will form over time. As a result, the car has difficulty ignition, increased fuel consumption, and abnormal shaking at idle.

Therefore, driving violently at low water temperature has a great impact on the car.

The reason why the water temperature is low in the car is largely due to the failure of the thermostat. It is important to know that the function of the thermostat is to automatically change the flow and circulation route of the coolant with the engine load and water temperature, so as to ensure that the engine works at the right temperature. When the thermostat fails, the water temperature of the car is low.

Can you keep driving a car with high water temperature?

The car cannot continue to drive when the water temperature is high, because in the case of high water temperature, continuing to drive will affect the output power of the engine. It is important to know that when the water temperature in the car is high, it will cause the temperature of the lubricating oil to rise, which will reduce the lubrication effect.

Once the lubrication decreases, it will be easy to leak oil, and the temperature of the whole machine will rise, which will not form a good oil film, which will affect the output power of the engine.

Of course, you can't continue to drive, the water temperature of the engine is too high, you must quickly pull over and stop, and then open the front cover of the engine, so that the water temperature of the vehicle drops quickly, when the water temperature is high, you must not be able to drive, to prevent the phenomenon of pulling the cylinder.

After the water temperature of the engine is too high, it must not be turned on again, otherwise it will cause irreversible damage to the engine, I hope I can help you.

If the water temperature of the engine is too high, it is best not to continue driving, it is better to pull over to cool down, and check whether the antifreeze is still sufficient. Otherwise, there is a risk of damage to the engine or spontaneous combustion due to high engine temperature.

If the engine is high and continues to drive, it will have a great impact, and you can not continue to drive at this time. When the water temperature warning light on the dashboard of the vehicle is on, do not continue to drive, and it will generally not have a serious impact on the vehicle after maintenance, but if you continue to drive, it may cause serious consequences, such as burning the cylinder gasket, valve and valve seat, and may even lead to cracks in the cylinder block or cylinder head, which needs to be overhauled to solve.

When the water temperature is too high, you need to stop and check immediately, and you can't continue to drive, otherwise it is easy to damage the engine and even need to be overhauled. If the water temperature is too high, it will first cause the deformation of the cylinder head and the cylinder gasket, and the deformation will not seal tightly, the cylinder gasket will be directly damaged, and the coolant will be mixed into the oil passage, resulting in a great reduction in the lubrication of the engine, and then damage the parts of the engine.

Can I continue to drive if the engine water temperature is too high? I think that if the water temperature of the engine is too high, it will directly affect the power of the engine, and if you continue to drive, it is possible. Direct damage to your engine, I feel encountered. The engine is too high to continue driving.

It can't be turned on, this is a problem with the cooling system, and then it will damage the engine.

Can I continue to drive if the engine water temperature is too high? The water temperature of the engine is too high to continue watching, because if I continue to drive, it will cause damage to the car.

The engine can continue to drive if it is too high, that is, it is usually said that the pot is boiling, and you must stop and wait for the water temperature to decrease before turning on.

Can you continue to drive if the engine water temperature is too high, if the engine water temperature is too high, you should immediately pull over and open the front cover of the engine to dissipate heat, find the reason for the high water temperature, and ask the repair shop for repair if necessary.

No, you have to stop and cool down first.

After turning on the air conditioner, the load on the engine increases, the heat dissipation increases, and the water temperature will naturally rise. However, most cars will maintain the water temperature at the original equilibrium temperature by increasing the thermostat opening. If the water temperature is high in the car, it means that the opening of the thermostat has not increased or the water temperature is still high when it has been driven to the maximum, which is caused by insufficient heat dissipation capacity.

The measure is to check the lower thermostat. When driving, we also use low rpm and high speed conditions as much as possible, so that the engine load is small and the air intake volume is large, which will reduce the load on the cooling system.

Hello, you can't drive it like this, and if you start it again, the engine will break.

The engine water temperature is too high and the alarm cannot be continued to open. If the engine water temperature is too high, you should stop immediately and wait for the engine temperature to cool down before hitting the road.

The engine temperature is too high to continue driving.

When the engine temperature is too high, the cooling system pipeline may burst, or the small water tank of the warm air may burst, resulting in water damage to the electrical parts in the cab. It will also cause damage to the engine head gasket, and the coolant will enter the combustion chamber to participate in combustion after the cylinder head gasket is damaged, and there is a certain probability that the connecting rod will be bent at the top, resulting in damage to the engine.

The correct thing to do if the engine temperature is too high:

1. Find a safe place to pull over, let the vehicle idle and do not turn off, because the cooling fan and coolant circulation will stop after the ignition is turned off, which will make the engine hotter;

2. Open the hood, increase air circulation, so that the water temperature drops, and then unscrew the radiator and water cover, and then open it after the internal water vapor is discharged;

3. Check whether there is any leakage in the water tank connection pipeline, and then check whether the coolant is sufficient, if there is no available coolant on the car, you can replace it with mineral water first, and you can drive after the engine cools down.

If the water temperature is high, you will definitely not be able to continue driving, and you should stop the vehicle immediately and turn off the engine under the premise of safety. Open the cover of the machine to dissipate heat, and contact the repair agency for treatment. Avoid damage to the internal parts of the engine due to the high water temperature of the engine.

The common reasons for high engine water temperature are: the lack of antifreeze in the engine cooling system, which may be the leakage point of the engine, such as leakage of water pump, broken pipeline, damaged water tank, etc.; A malfunction in the thermostat in the engine cooling system caused the water temperature to be too high; The cooling fan in the engine cooling system is not working properly, resulting in poor heat dissipation of the coolant; The water pump in the engine cooling system is faulty, and the water pump does not rotate smoothly, resulting in poor flow of coolant; Under normal circumstances, the normal working temperature of the engine is about 90 degrees, which can make the engine have good power and economy, and at the same time can reduce wear and extend the service life, the engine temperature is too high or too low will cause aggravated wear and tear, power decline and other phenomena, especially the temperature is too high, if the engine is easy to damage the engine if it works at high temperature for a long time, and even cause the engine to be scrapped if it is serious.

Under normal circumstances, the normal working temperature of the engine is about 90 degrees, which can make the engine have good power and economy, and at the same time reduce wear and extend service life.

The engine temperature is too high or too low, and the wear and tear are intensified, and the power is reduced, especially if the temperature is too high, if the engine is easily damaged if it works at high temperature for a long time, and even the engine will be scrapped if it is serious.

Under normal circumstances, the normal working temperature of the engine is about 90 degrees, which can make the engine have good power and economy, and at the same time can reduce wear and extend service life.

1.There is a risk that the water pipe will rupture, and the antifreeze leakage at high temperatures may occur. 2.

The continuous high temperature of the engine will cause the engine to pull the cylinder, and the most serious will also reduce the performance of the engine, and even scrap the serious consequences. Therefore, when you find that the water temperature continues to maintain a high temperature, you should stop and check in time to see what is the cause. The water temperature of the vehicle we see is too high, which is actually caused by the coolant not working normally, so we must pay attention to it, check that the problem appears, and eliminate the problem in time to continue driving.

2. When the vehicle is driving normally, the water temperature should be maintained at the normal scale, even if it is a long-distance drive, the water temperature will not fluctuate greatly. When you find that the water temperature is abnormal, you should check whether the coolant is within the normal scale and whether there are any other abnormalities. When the problem cannot be ruled out, it is necessary to contact the maintenance personnel for treatment, otherwise the water temperature will be maintained at a high temperature will put the engine in an abnormal state, and the most serious will have the serious consequences of engine burning, so we must pay attention to it.

Why does the water temperature rise when the vehicle is moving?

There are many reasons for the abnormal increase in water temperature, and for ordinary drivers, you can first check whether there is any leakage of coolant in the engine compartment. When the coolant is not enough, the coolant refrigeration effect will be insufficient, so when the coolant is found to be insufficient, the coolant should be replenished in time to make it at the normal scale. In normal use, the coolant will not be insufficient, and it is generally a leakage problem, so it is necessary to check whether the pipe of the water tank has a rupture problem, and it should be repaired in time when it cannot be solved.

It was found that the water temperature was maintained in a superheated state.

If the coolant is insufficient, add coolant in time. If there is a problem with the cooling fan, it can also be replaced. If there is a high temperature caused by water pump or thermostat and other problems, we ordinary drivers can not solve it, at this time, it is necessary to repair it in time, let the 4S shop or professional maintenance personnel deal with it, do not work with illness, so that the engine is in a long-term high temperature state, causing damage to the engine.

Tips. Finding problems and solving them can make our travel smoother. The coolant of the vehicle plays the role of cooling the engine, although it is a consumable, but the role is also not negligible, and we should also pay special attention to it when driving in daily life.

The car can't continue to drive because the water temperature is high. Under normal circumstances, the normal working temperature of the engine is about 90 degrees, which can make the engine have good power and economy, and at the same time reduce wear and prolong service life.

The water temperature of the car is too high, most of them are due to the lack of water in the water tank, or the water tank is leaking, and the water tank needs to be added or repaired.

The water temperature of the engine is too high to be turned on. If the water temperature is too high, pull over immediately (do not turn off the heat) and check the tank for water. Continued overheating of the engine can lead to damage to engine components, weak starting, unstable idling, and in severe cases, spontaneous combustion.

The treatment of excessive engine water temperature is as follows:

1. If the engine is overheated due to insufficient cooling water, remember not to add cold water immediately (to prevent deformation and cracking). Start by opening up your car to a ventilated, shady place. Then open the hood, wait for the cooling water temperature to drop, and then add water;

2. Water leakage may also cause the engine to overheat, and many small pipes are installed on the antifreeze bottle, which may be caused by loose or damaged hoses. In case of emergency, you can wrap the damaged Jingheng pipe with adhesive tape or plastic bag, and drive after replenishing the water;

3. The thermostat is overheated by the failure of the engine, and the thermostat is generally installed on the upper part of the engine. If the cooling water temperature does not reach a certain temperature, water cannot be sent to the tank. Therefore, it may be due to the thermostat, so that the temperature reaches the base temperature and cannot be used to send water to the water tank, or the amount of water delivered is too small, resulting in overheating of the engine.

In this case, you should immediately go to the nearest repair shop for treatment;

4. If there is no coolant in an emergency, it can also be replaced with water, but the coolant must be replaced immediately after arriving at the destination to solve the problem.

Millions of car purchase subsidies.

If the water temperature of the engine is high, it is recommended not to open it again, it is best to wait for the rescue vehicle to come, if the water temperature is high, the cylinder head gasket will rot first, and then it will pull the wide cylinder.

How to solve the problem of high water temperature:

If the engine suddenly overheats while driving, you should first pay attention to the ammeter dynamics. If the ammeter does not indicate charging when increasing the throttle, and the pointer only swings back to the "0" position intermittently by discharging 3a-5a, it means that the fan belt is broken. If the ammeter indicates charging, the engine should be turned off and the radiator and engine should be touched with your hands.

If the engine temperature is too high and the radiator temperature is low, it means that the water pump shaft and impeller are loose, which interrupts the cooling water circulation; If there is not much difference between the engine and radiator temperatures, you should look for serious water leaks in the cooling system.

The temperature of the cooling water rises to boiling soon after starting, and the main valve of the thermostat falls off and is horizontal in the radiator water inlet pipe, which hinders the large circulation of cooling water. If the cooling water is found to be boiling during driving, it should be stopped immediately, and the engine should be run at low speed until the water temperature is normal, and then turn off the engine for inspection.

Photo by Zeng Caihong) @2019