How to set up a wifi hotspot in win8 system

If it is a desktop, insert the wireless network card into your computer in advance and wait for the driver to be installed automatically, and the laptop will turn on the wireless network card.

After logging in to win8, press win+r keys to bring up the running window, and enter cmd in the window, and then press enter.

In the black window, type: netsh wlan show drive. Check whether your NIC supports bearer networks. Mine is supportive!

If it shows that it can carry the network, continue to enter in the black window: netsh wlan set hostednetwork mode =allow ssid=hahaxiao88 key=admin888

ssid=can be changed to the name of the wireless network you want to use (e.g. wuxian).

key=You can change it to the password you want to use (e.g. admin888, at least 8 digits!) ）

until the following figure is displayed.

Now find the local connection (if you don't know, you can see.)

Then right-click on the local connection --- select Properties.

Click on the Share --- select "Wi-Fi 2", and check both of them!

Then OK. Now go back to the black window, type: netsh wlan start hostednetwork and press enter.

This command is the command to turn on wifi!

Successful search. You can copy the command, store it in the txt text, and then put it. txt file. cmd, you can double-click to run, no more typing in the black window!

The command to turn off the wifi is netsh wlan stop hostednetwork

360, PC Manager, UC Browser and so on all have this feature.

There are many such software on the Internet, and 360 Security Guard also has this function.

Tool Raw material: win8 system.

Here's how to set up a WiFi hotspot on Win8:

1. First, move the mouse to the lower left corner of the desktop, right-click, and find "Command Prompt (Administrator)" in the pop-up shortcut menu.

2. After clicking, the system will open the command prompt with administrator privileges, enter the following command "netsh wlan set hostednetwork mode=allow ssid=test key=0123456789" in the command prompt, and press enter.

3. Find the network icon in the lower right corner of the desktop, right-click, and "Open Network and Sharing Center".

4. After opening, in the upper left of the window, find "Change adapter settings", in the open network connection window, we did not find the virtual wireless network connection that appeared under win7.

5. Go back to the command prompt window, enter the command "netsh wlan start hostednetwork", press enter, and start the bearer network.

6. At this time, you can find the virtual network connection in the network connection window.

7. Right-click on the network connection of Ethernet--Properties, find "Share", and select the network proposed by the virtual grip, as shown in the figure below, at this time our wifi hotspot is officially established.

<>8. After the last step is completed, it is recommended that the stool boss close the bearer network first and then start the bearer network in the command prompt, which is equivalent to restarting once.

Note: If a user cannot find a virtual network in the sharing list, it is recommended to enable the sharing of each network connection.

Win8 sets up a WiFi hotspot by changing the adapter to set it up, and the specific steps are as follows:

1. Click the network right button on the desktop, and click Change adapter settings in the window that comes out.

2. Right-click on WLAN and then click Properties.

3. After entering the WLAN properties interface, click the sharing option, and check Allow other network users to connect through the Internet connection of this computer. Then under Home Network Connections, select Tron Hotspot Virtual NIC.

First, move the mouse to the lower left corner of the desktop, right-click, find "Command Prompt (Administrator)" in the pop-up shortcut menu, and click it, as shown in the following figure

After clicking, the system will open the command prompt with administrator privileges, enter the following command "netsh wlan set hostednetwork mode=allow ssid=test key=0123456789" in the command prompt (excluding double quotes, the same below), press enter, as shown in the following mapped link:

Find the network icon in the lower right corner of the desktop, right-click, and "Open Network and Sharing Center", as shown in the following figure:

After opening, in the upper left of the window, find "Change adapter settings", in the open network connection window, we did not find the virtual wireless network connection that appeared under win7, as shown in the figure below, this is because under win8, even if the network bearing mode has been allowed, it still needs to be started first, to find, which is why many users can not find the virtual network;

<> go back to the command prompt window, enter the command "netsh wlan start hostednetwork", press enter, and start the bearer network, as shown in the following figure

At this point, we can find the virtual network connection in the network connection window, as shown in the following figure:

Right-click on the Ethernet macro Yansun network connection--Properties, find "Share", and select the virtual network, as shown in the figure below, at this time our wifi hotspot is officially established.

<> end precautions.

Just follow the steps above, especially steps 4-5, which are important.

If a user cannot find a virtual network in the sharing list, it is recommended that you turn on the sharing of each network connection to see if it is occupied.

Win8 in how to set up a wifi hotspot operation steps:

Step 1:

First, open cmd as an administrator.

Step 2:

netsh wlan set hostednetwork mode=allow ssid=lijuan125 key=lijuanqiumingyue 。

mode: whether to enable the virtual Wi-Fi network card, change to disallow to prohibit.

SSID: The name of the wireless network, preferably in English. (Livdran2012 is used as an example, which can be set freely).

key: wireless network password, limited to more than 8 characters. (Here the 100100100 is used as an example, which can be set freely).

Step 3:

Then click the "Enter" button, if the result appears, it means that the name and password of the wifi are set successfully!

Step 4:

Then "Open Network and Sharing Center", then click "Change adapter settings" to go to "Control Panel Network & Internet Network Connections".

Step 5:

Then type "netsh wlan start hostednetwork" in cmd and press "enter". You'll then be able to see the virtual network you just set up in Control Panel Network & Internet Network Connectivity.

Step 6:

Then right-click on the connected network on your computer and select "Properties".

Step 7:

After clicking "Share", check "Allow other network users to connect through this computer's Internet connection".

Step 8:

Then, in "Home Network Connection", select the virtual network "Local Connection*12" that you just established. Finally, click the "OK" button.

Step 9:

Now you can try it with your mobile phone to find the virtual network you just created, and enter the password to connect to and surf the Internet.

How to set up a WiFi hotspot on the Win8 system:

Tools Materials.

Win8 system computer security guard.

Method steps.

Start by installing 360 Security Guard.

Find the free wifi tool, click on it, and wait for it to be installed.

The wifi name and password can be set according to your preference, and you can save it when you set it.

Computer, no. It seems that only mobile phones can build hotspots!!

Steps to set up wifi hotspot in win8:

Step 1: First, move the mouse to the lower left corner of the desktop of the Win8 system, and select "Command Prompt (Administrator)" in the shortcut menu for mouse email;

Step 2: Then open the Command Prompt with administrator privileges, enter the following command in the Command Prompt:

netsh wlan set hostednetwork mode=allow ssid=test key=0123456789

Step 3: Find the network icon in the lower right corner of the win8 desktop, and right-click to open "Open Network and Sharing Center";

Step 4: Select the "Change Adapter Settings" item, if you don't find this item, you need to start the virtual Wi-Fi connection first, then you can find the "Change Adapter Settings";

Step 5: Go back to the Command Prompt window and enter the following command:

netsh wlan start hostednetwork

Step 6: When we return to the interface of "network connection", we can find the network connection virtualized by win8, right-click on the network connection of Ethernet and select "Properties", and then find the option of "sharing", select the network we just virtualized, then the wifi hotspot of the win8 system is established.

Based on the win8 system itself, through a simple command, the win8 system is set as a wifi hotspot, so that mobile phone users can open the wireless search win8 system just established wifi hotspot for network connection.