The miniature flame machine is also a polishing machine, and the kind of advertising organic word is

You give the product details.

Power supply 220V, 50Hz power 300W-400W Electrolytic residue capacity Pure water consumption Hourly electrolyte consumption Hourly gas generation 100liter Hour body size 360*260*270 Net weight 16kg

But... I can't find the corresponding manual, and...

First, the principle of the product:

The energy equipment that adopts water electrolysis technology and electrically extracts hydrogen and oxygen gas from water, in which hydrogen is used as fuel and oxygen is used to support combustion, which can replace acetylene, coal gas, liquefied gas and other carbon-containing gases, and has the advantages of high calorific value, flame concentration, zero pollution, high production efficiency, energy saving and convenience.

Second, the scope of application:

1. It is especially suitable for the rapid transparent polishing of the hairy side, concave surface, inner hole, curved edge and other special-shaped corners and edges of plexiglass (acrylic) advertising crystal words or craft engraving products, so as to solve the problem that ordinary throwing wheels cannot do.

2. It is especially suitable for fast transparent polishing of fine burrs of plexiglass products. It is suitable for fast flame polishing of acrylic wool side of various material thicknesses, efficient and simple. It is also suitable for carrying the aircraft to the field environment.

3. It is suitable for precision process open flame welding, small casting, quenching and annealing of small parts, various wire welding, high temperature material testing in jewelry factories, gold shops, dentals, glass and other industries.

3. Model specifications.

Generally, there are several specifications for one person, two people, four people, etc.

For one person: power 350W gas production >80L

For two people: power 600W gas production >150L

For 4 people: power 1000W gas production "230L".

It is most popular for one person.

Fourth, the main machine sample drawings and accessories.

Flame guns and all kinds of nozzles.

Flame polisher (in use).

Flame polisher (in use).

Schematic diagram of polishing.

Schematic diagram of polishing.

5. Maintenance.

1.When not in use for a long time, the power should be turned off to release the residual gas in the machine.

2.When the continuous time is 1000 hours or the electrolyte becomes dirty, the electrolyte should be replaced. Rinse the electrolyzer with clean water and then add 25% KOH electrolyte to the electrolyzer.

3.If alcohol and other additives are added to the additives tank during use, the principle of adding and pouring out on the same day should be maintained, so as to avoid the alcohol from flowing back into the electrolyte due to the negative pressure in the tank caused by thermal expansion and contraction of the electrolytic cell, resulting in the failure of the electrolyte. The method of detecting electrolyte failure is that the flame is blue and the flame is weak.

4.Do not use it in thunderous weather environments to avoid damage to the electrolytic power supply.

5.When the air pressure in the machine is high and the flame gun has no air to come out, it may be that the flame arrester or the flame retardant core of the flame gun is blocked, which can be soaked in warm boiled water for five minutes, and then shaken off the water and then used again.

Is it for plexiglass polishing?

Add sodium hydroxide and purified water in the reaction kettle: it must be pure water, such as the n-layer filtered purified water sold in the store, there are too many impurities in the tap water, which will lead to impure flames, and the plexiglass will turn black after polishing, and dirt will be formed on the inner wall of the reactor for a long time.

I can't say what the name of the pure alcohol is added to the container that stores alcohol.

Alcohol should also be pure, not 75% medical disinfectant alcohol.

After turning on the machine, wait for a while, see that the barometer shows that it reaches a certain air pressure, unscrew the nozzle and let the gas flow for a few seconds to discharge the remaining air in the pipe to avoid backfire and flash fire. Then the lighter is lit and ready to use.

The concentration of medical alcohol is only 75%, which is just enough to achieve the effect of disinfection and sterilization.

The acrylic fire polishing machine is made of chemical alcohol, and the purity is generally about 98%.

Medical alcohol is too thin. Industrial alcohol.

The normal flame is light blue, yellow means that 100% of the body is blocked, pay attention to daily care, the electrolyte can only be used with pure water, as well as alcohol, must be added to the special cylinder for alcohol, and then there is daily care, once every two months, you must open the case cover, clean up the debris inside, and the ventilation tube in the body, and the filter pot, that is, it is installed in the body, the two small pots next door to the cylinder, will be blocked in about three months, after cleaning up the new electrolyte and alcohol from the new, you will find that the fire turns back to light blue, The size and length of the flame are much larger than before.

The yellow mission has sodium ions in it, and the sodium ion flame color is yellow.