The computer can t be turned on, and it can t be turned off, tick, wait and tick, how to solve it!

A ticking sound from the computer is usually an indication that can provide some clues to fix the problem. Different beep patterns may indicate different hardware issues. Here are some common scenarios and possible workarounds:

1.Single short beep:

This usually refers to a problem with RAM (memory). It could be that the RAM is not inserted correctly or that there is a fault.

Workaround: Try replugging the RAM modules to make sure they are installed correctly. If the problem persists, consider replacing or repairing the damaged RAM.

2.Continuous short beeps:

This usually refers to CPU (processor) or memory issues. It could be that the CPU or memory is not properly connected or is faulty.

Workaround: Check if the CPU and memory are well connected, try to plug and unplug them. If the problem persists, consider replacing or repairing the faulty component.

3.*Long beep**:

This could be a graphics card issue. It could be that the graphics card is not properly connected or is faulty.

Solution: Check whether the graphics card is well connected and try to reseat the graphics card. If the problem persists, consider replacing or repairing the faulty graphics card.

4.Non-stop long beeping:

This usually refers to a power supply problem. It may be that the power supply** is faulty or not providing enough power.

Solution: Check that the power supply is well connected to make sure it provides enough power. If the problem persists, consider replacing the power supply.

5.No ticking:

If you don't hear any sound, it may be a power connection or a faulty motherboard.

Solution: Check if the power connection is good and make sure all the cables are connected correctly. If the problem persists, you may need to diagnose the motherboard issue further.

If you are not sure how to deal with the above problems, or you do not have enough experience to deal with hardware problems, it is recommended to seek professional help, or send your computer to a professional repair service center for diagnosis and repair.

Now whether it is work or daily life, we are inseparable from the computer, among which everyone should know that the computer starts up with a tick sound is a normal startup sound, but recently some netizens have reported that they have encountered the problem that the computer can't turn on with a drop, and they don't know what to do.

Here's how to deal with it:

Display. The motherboard boot screen is not displayed, first check the monitor.

1. Whether the power of the monitor is turned on.

2. Whether the connection is normal.

You can connect the monitor to another computer to see if there is a problem.

The host is cleaned up. Excessive dust covering the circuit board can lead to poor heat dissipation, and may also cause short circuits, generate static electricity, and dust on the fan can also increase noise.

Graphics. After checking the monitor, there is no problem, and then look at the graphics card.

1. Unplug the graphics card and rub the gold finger back and forth with the eraser, then reinstall it and turn it on.

2. Unplug the graphics card and start it directly, if the computer starts, it will say that there is an obvious card problem.

Memory sticks. Poor or damaged contact of memory modules.

1. Unplug the memory module and rub the gold finger back and forth with the eraser, then reinstall it and turn it on.

2. If there are multiple memory modules, you can install one boot computer first.

If the cpucpu is in poor contact or damaged, remove the CPU for inspection, and then put it back on.

Hard disk. Check that the hard disk is in poor contact or damaged, unplug the cable and reinstall it.

Power supply. Damage to the power supply (unlikely).

Suggestion. 1. All operations should be operated under the premise of power failure.

2、.In the above content, the possibility of hardware damage is not very likely, it is recommended to find a computer repair master for repair after trying other solutions.

3. If you are a novice computer, it is recommended to only try the simple operation of the monitor, graphics card, and memory module to avoid damaging the hardware.

4. It is recommended to find a repairer directly to repair the laptop.

The above is the solution to the problem that the computer can't turn on after a sound, and you can refer to the above methods to solve the same problem.

If your computer won't turn on, you can try the following solutions:

1.Check the power connection: Make sure that your computer's power cord is properly connected to a power outlet and that the power cord isn't loose or damaged.

2.Check the power switch: Check that the power button or switch is on or set correctly. Some computers may have a switch or button that ensures it is toggled to the "on" position.

3.Check battery status (for laptops only): If you're using a laptop, make sure the battery is plugged in and the battery is charged. If the battery is too low, it may prevent your computer from turning on.

4.Restart your PC: Sometimes your PC may experience a temporary glitch that won't start up. Try pressing and holding the power button for a few seconds to force it shut down, then press and hold the power button again to start up your computer.

5.Check your display connection: If your computer really isn't responding, it might be because your display won't connect to your computer. Make sure that the display is properly connected to your computer's Display Port and that the power is on.

6.Check for hardware failures: If none of the above solutions resolve the issue, there may be a hardware failure. This may require a professional repairer, so it is recommended to consult the manufacturer of the computer or seek professional technical support.

Please note that before trying any repair method, make sure that you have backed up your important files and data in case of data loss.

1.Memory failure: The computer will perform a memory self-test when initializing, and if there is a problem, it will make a beeping sound.

You need to turn on your computer to check if the memory module is plugged in tightly or replace it with a new one. 2.Hard Disk Problem:

When the computer is initialized, it will try to read the hard disk information, and if there is a problem with the hard disk, it will produce a beeping sound. It may be that the hard drive is damaged or poorly connected, in which case the drive needs to be replaced or reinstalled. Faults:

Didi Dripping sound may be caused by CPU failure or CPU fan abnormality, you need to turn on the computer to check whether the CPU is plugged in tightly and whether the CPU fan is running normally.

If the computer doesn't turn on after a drip, it's probably because it's out of power, and you can check the wiring to see if there's any damage.

There are many reasons, oh, a drop is normal, if the screen can't be displayed, but the host power is on, it's a problem with the graphics card (usually caused by too much dust) Take the graphics card or memory card out and sweep the dust, and wipe the metal feet with an eraser. There are many reasons why the computer cannot be turned on. If that's not enough.

You go into more detail. I could go on and on.