How do skateboard wheels perform?

Children's scooters can not only help exercise children's bodies, but also coordinate the flexibility of children's bodies, and can effectively improve children's various reaction skills. But there are many types of scooters on the market now, and many people don't know which kind of scooter is good. So how many wheels of children's scooters are good?

There is also an important division, that is, according to the production materials to shout letter height: 1: frankly shout plastic wheel:

Plastic wheels are wheels made of ordinary plastic, also called PVC wheels, which are hard, easy to fluff when gliding, and loud to run, and are also the cheapest one. It is generally used on low-end products. 2：

PU wheels: generally scooters are made of PU wheels, the wheels are made of PU material with good elasticity and wear resistance, the use of the cost will not be very expensive, and relative to the plastic wheels to be mute a lot, generally judge whether the PU wheels can actually use fingernails to pinch the wheels to know, PU wheels are a little elastic, plastic wheels are not pinched.

If the child is smaller, buy the rear two-wheeled one, such as the scoot &ride scooter HighwayBaby+ series is suitable for 1-3 year old babies to play, it is a wide front wheel. The rear wheels are designed with two wheels, which increases stability and is more suitable for small babies to exercise balance. Children's bipedal scooter front drive one wheel is better or two wheels have their own benefits, children's bipedal scooter Zheng ruler front drive one wheel needs to balance the performance of the child to play, two wheels can make the child more stable than the small child master.

Hello, boys buy a single wheel, girls can buy a single wheel and two wheels. It depends on how old the child is, generally five years old to tremble in the middle and lower with the first two rounds, five years old or older, the first round of the appropriate draft for all ages. The last two wheels of Eggplant Yunshan are suitable for younger people who have just learned to play, because they can't play, the center of gravity is backward, and the last two wheels will help its stability.

After learning to slowly skate faster, the center of gravity is forward, and the stability of the first two rounds is better. When the child is older and can play, he will change to a single round before and after, so that he can really exercise the child's balance.

Hope it helps! Still have any questions?

There are several reasons for this:

1. If the wheels of the skateboard are broken, you can replace them with new ones.

2. If the slide bearing is rusty, you can use gasoline to clean the rust on the bearing, and then apply lubricating oil.

3. The slide bearing is too dry, so it is good to lubricate the bearing directly.

Hardness

Skateboard wheels are usually rubbed polyurethane as the main material, and the hardness of the wheels is different due to the different proportions of polyurethane in the wheels. The wheels with a hardness of 85A (A refers to hardness) are relatively soft, suitable for sliding on rough roads, and the sound is very small when sliding, which is a good choice for friends who like to pedal and go shopping.

However, the wheels of the 85A are relatively wear-resistant because they are soft, and it is easy to break the spacer layer when doing actions such as side-slip brakes. Generally, skaters use 97a-103a wheels.

This type of hard wheel is suitable not only for smooth marble and flat road surfaces, but also for props such as U-pools, jumping platforms, etc. In smooth and flat places such as 85a wheels, there is no sound. It is not recommended to use 103a for transparent or translucent wheels, it is too hard and will burst, so it is best to only use it on props made of all wood materials.

If the lubricating oil is not enough or the bearing is broken, you can try to replace the bearing, or if you marry the display, there are particles.

1. The speed is different: it is said that the wheel is arrogant. The speed of the wheel is small, which is the brightest.

2. Different grip: the wheel also has a width value, the wider the grip, the better, and the cushioning will be better, more secure, the skateboard is not easy to roll over, it is a good choice for novices. However, the narrow wheel, because of the small contact surface, will be very flexible to do the action.

3. Different influences on the board surface: according to the wheels, you should also match your board surface, and the smaller board surface will naturally match the smaller wheels. If you want a large wheel, you need to match a large board surface.

Extended Information: 1 Adjust the wheels before use to make them move.

2. Adjust the elasticity of the cushion reasonably with a lock nut according to your own use.

3 Pay attention to waterproofing, try not to get the skateboard wet, and do not slide on wet or rough roads.

4 Beginners need the help of friends and relatives to glide on slopes with small inclination angles, and gradually switch to different slopes as their skills improve.

5 In case of emergency, you can choose the foot brake or jump slide board. When jumping off a skateboard, ask if you will bump into people or other objects around you.

6 If a replacement is required, the replacement should be adapted to the specifications of the existing accessories. It doesn't have to be exactly the same as the original parts.

7。Bearings generally no longer need to be lubricated.

Small wheels have little resistance and are not easy to fall, but they are not as easy to control as large wheels. It's up to you to feel it.

Skateboard is the originator of the history of extreme sports, and many of the extreme sports of early Jianhuai are extended from skateboarding. Skateboarding, which evolved from surfing in the late 50s and early 60s of the 20th century, has become the coolest sport on the planet.

The main skateboarding skills include: the

Aeriall (on the slider), The Invert (on the catwalk), the

ollie (jumping with a board) is arguably the most important skateboarding action after flipping. Two important skateboarding international organizations in the world: the International Association of Skateboarders (full name: International

Association of Skateboard Companies (IASC) and World Cup Skateboarding

Skateboarding abbreviation: WCS).

Skateboard wheels are written on some 85a or 100a this is the hardness the higher the value the harder it is, but the wheels depend on how you often play on the road surface to choose wheels of different hardness for different road surfaces to look at and adopt.

Generally, where to buy it, you ask the boss, and he will tell you how much a is, such as 99a, 92a, etc.