How to adjust the volume of the microphone on the iPhone The microphone is very quiet

The microphone volume (microphone) of the Apple mobile phone cannot be adjusted, and the volume of the earpiece can be pressed on the upper left side of the mobile phone during the call+. The microphone is very quiet, and it can be set as follows, and it can be improved appropriately. The steps are as follows:

1. Open your iPhone and find "Settings" from the interface.

2. Find the "General" option under the settings page and click the "General" button.

3. Find the "Accessibility" option on the general page and click the "Accessibility" button.

4. Scroll down to find the "Hearing Devices" function under the Accessibility page, and click the "Hearing Devices" button.

5. Find "Hearing Aid Mode" under the Hearing Aid Settings page and turn it on.

6. After setting, you can try to dial**, the sound becomes clearer and the volume becomes significantly louder. If you think the sound is okay, don't turn off the noise cancellation button, because the sound quality will be better under the effect of noise cancellation.

I can't adjust it. The handset volume can be pressed on the top left volume + on the side of the phone during a call. The microphone is very quiet, and may be set up as follows, which can be improved appropriately. The steps are as follows:

1. First of all, you first dial a person (such as 10086).

2.Open Settings - Accessibility - Hearing Aids.

3. Then turn on the hearing aid mode;

4. At this time, we can call 10086 more for testing, and we can see that the volume has been adjusted to the maximum just now, and we can continue to increase it.

Brother,There's no way.,The voice of the generation is small If you want him to be bigger,You have to take a destructive method.,Buckle the net from the speaker Follow-up question: By the way,,The keys on the lock screen are sometimes good Sometimes not good What's going on: Switch on and off button?

It's been a bit out of order for a long time to ask: Ah, what to do, is it going to be repaired, they said let me start from scratch, maybe it's good: If it doesn't have any effect for the time being, you don't need to repair it, it doesn't feel like it's a problem with flashing, after all, it's been so long, it's a bit out of order and normal Ask:

So how much does it cost if I fix it? I think my loudspeaker is split, and the sound sounds awkward, and it's not as good as my 95, do you do the system??? My q 529535485:

If that's the case, the speaker is broken.,It takes about 200 to replace it.,That's not something that can be solved by flashing.。

Trouble, thanks!

Find a clean toothbrush and brush the bell mouth in three minutes and you'll be back to normal!

Listen to me, you do this, my mobile phone has been like this, you use an alcohol toothbrush to wipe the earpiece, you have to use a hair dryer to dry it within 10s, and then you call 10086 to try God solves.

Repair apples or go to a regular after-sales center for repair, so as to have a guarantee, in the case of not understanding, it is not recommended to disassemble the machine and repair blindly, so as not to cause damage to the body. If it is convenient, you can go to the store for inspection and repair.

If you can't hear you on a ** call or FaceTime call

2.Tap the Record button, speak into the bottom of your phone, then stop recording.

If you're on a hands-free call, the other person can't hear you

1.Go to Settings > Privacy > Microphone.

Learn more about what to do if the microphone on your iPhone isn't working.

<><4. Enter the setting interface of the auxiliary function, find the ** item of hearing, there will be a **noise cancellation option below, turn on the switch at the back, this is to reduce the ambient noise when using the earpiece, so that the ear can hear more clearly.

<>6. Next, enter the setting interface of the hearing aid device, the last option is the hearing aid mode, turn on the switch at the back, this function is to increase the volume and quality.

Notes:If none of the above methods work, you need to consider whether to take the phone to a nearby Apple repair shop to repair, it is likely that the phone is flooded or other reasons cause the speaker to malfunction, do not disassemble the phone parts at will without understanding!

The following is a tutorial on how to turn down the sound of the microphone of the Apple 6 mobile phone.

1. Sometimes we turn down the volume and the call is still loud because we have turned on the hearing aid function, first of all, we find the mobile phone settings and click on the mobile phone settings.

2. After clicking on the phone settings, you will see the general settings below and click on the general settings.

3. Enter the general interface, we can see that there is a support function, click on the help function.

4. Enter the help function interface, there is a hearing aid compatibility, it is now on, so our call is very loud, we just need to click on it.

5. After clicking to close, it will not be green here, and you won't feel loud when you talk again.

There are several reasons why the phone microphone is particularly quiet:

1. Mobile phone network problems.

If there is a problem with the network of the carrier or mobile phone, you can change the time, location, and contact, and re-perform the call operation to confirm whether the call quality is poor due to network reasons.

Second, the voice is turned down.

In this case, we can press and hold the volume button on the side of the phone to adjust and turn the sound to the maximum.

3. The speaker is blocked.

It is also possible that the speaker gets into liquid, or it is blocked by dust or foreign objects, which can also make the call quieter. This is a bad preparation, and we need to use a hair dryer and a dry toothbrush to dry it or remove foreign objects.

Fourth, the problem of mobile phone cases.

You can remove the phone case so that the microphone hole of the phone will not be blocked, and the sound can be prevented.

Fifth, the mobile phone system is not updated in time.

Sometimes the system version of the mobile phone is too old, and there will be bugs and vulnerabilities, which will not only cause all kinds of problems, but also slow down the running speed of the mobile phone. Therefore, it is necessary to upgrade to the latest system version.

6. When talking to people in a noisy environment, you may not be able to hear clearly.

You can try to answer in a different place, or wear headphones, which not only ensures the privacy of the call, but also improves the call quality, and you can also turn on the hands-free.

Solution. 1. Turn on the settings function in your iPhone.

2. After opening the settings, click General.

3. After entering the general page, select the accessibility option in the general.

Fourth, after entering the accessibility option, there is a hearing aid compatible, which can achieve the effect of enhancing the sound of the call.

Fifth, turning on the function is to disrupt the function of opening the hearing aid, if you feel that the sound is loud, you can turn it off.

If you can't hear you on a ** call or FaceTime call

2.Tap the Record button, speak into the bottom of your phone, then stop recording.

If you're on a hands-free call, the other person can't hear you

1.Go to Settings > Privacy > Microphone.

Learn more about what to do if the microphone on your iPhone isn't working.

Tool Raw material: iPhone.

1. First find the settings on our mobile desktop and click on it.

2. Then click General.

3. Then click on Accessibility.

4. Then click to turn on the mono audio switch.

5. Then you can try to turn on the hearing aid compatibility switch.

6. If the above methods don't work, please use a cotton swab to clean up the microphone of our mobile phone.

The sound of the iphone8 mobile phone microphone is reduced due to the wrong channel setting.

Tools Required: iPhone8 Phone.

Steps:

1. Unlock your iPhone8 phone to the [Home Screen Page].

2. Press and hold the [Volume Key] on the side of the iPhone8 body to adjust the volume, and adjust the volume to full grid.

3. After successfully completing the volume control settings, return to the main page and open [Settings].

4. Enter the detailed option list of [Settings], find and turn on the [Dry Brother Xiang General] function.

5. In the [General] function menu bar, swipe down the screen to the bottom and select [Accessibility].

6. Turn on the [**Noise Cancellation] function in the [Accessibility] management settings page.

7. After turning on the ** noise cancellation function, select the channel settings.

8. Drag the channel balance [button] to the middle to keep the left and right channels balanced, and you can solve the problem that the sound of the iphone8 mobile phone microphone becomes smaller.