The printer sharer computer can not recognize how to solve, the specific driver, what driver should

First of all, on the official website**Driver: After entering**, search for your printer model in the search bar, and then click Search, at this time, the interface of the model of the printer you want will pop up.

In addition to going to the official website**,There are other**installation methods,For example,Connect the data cable of your printer to the computer,Then open the computer's "Control Panel" home page,Click "Hardware and sound" in the menu "Devices and Printers",After entering the window,You will see some devices connected to the computer,For example"Printer","Multi**device"And so on。 At this time you should look to see if there is your printer's model in the panel.

1 If not, click "Add Printer" and select "Add Local Printer", select "OKI" in the use of existing ports, and then pop up a dialog box, select Next, pop up to select Next, and finally it will prompt you that the printer driver has been successfully installed, and then you only need to print the test page.

2 If you have any, right-click the printer model you want to install, then pop up the dialog box, click "Printer Properties", select install driver after the pop-up dialog box, and then the computer will automatically install the program from the Internet, and then install PSAt this time, the computer needs to be connected to the Internet.

Also, usually the printer will come with a system disk, there is an installation program in it, and it will be installed directly in the computer, all you need to do is to select OK, and the next step is to do it.

For example, OKI 711 installation driver is very simple, there is a driver disc in the purchased printer, run automatically, and install it step by step according to the prompts. If the drive disc is lost, then go to the official website**C711dn's driver, pay attention to choose according to your computer's operating system**, after decompression, add the printer in "Devices and Printers", and select the "driver" path.

First install Master Lu to see the hardware type,Automatically update the driver in the installation of the driver wizard or the driver home on it,Besides, buy a printer should give the drive disk,If you don't feel too troublesome, go to the official website**Driver,But generally the official website gives several drivers,And one by one。

What model of printer (there are generally on the body), and what is the system (XP, VIST, Win7?) ）。Then go to the official website of the printer** corresponding driver. If you really don't know, send out the printer model and system, and I'll help you find it.

Just install the driver of your printer.

It may be that the printer driver is not compatible.

1.Delete the printer driver on the guest machine: After uninstalling it in the device manager, if you want to completely delete the printer driver, you should click on the file in the menu bar in the start-control panel-printers and faxes, select server properties-drivers, and delete the printer driver here to completely remove the printer driver (if you can't delete it, go to the second step directly).

local port) – enter the hostname next printer shared name (for example: www-845ba19 hp1020) Note: Letters are case.

The next step is to replace the existing printer driver and install it.

3.The host has a username and password, and you need to enter the username and password (and remember the password) The steps are as follows: Start - Run - Enter the host IP address - A dialog box will appear to enter the username and password.

<>2.Open the Control Panel, find Hardware & Sound, and click View Devices & Printers below.

3.Find Devices & Printers and click on the Add Printer option below.

4.The tethered printer will appear, click on the printer, and then tap Select.

5.Once the printer is added, there is no "driver not found".

If the settings are incorrect, the following steps are used

1. First click Start in the computer, open all programs, and click Device & Printer, as shown in the figure below.

2. Then on the open printer management page, right-click and select Add Printer.

3. Then select the printer type, if it is a local printer, select local, as shown in the figure below.

4. Select the printer model you want to install and click Next.

5. Enter the printer name, enter it casually, and click Next.

6. Finally, wait for the printer to be installed, the problem will be solved as shown in the figure below, and the connection will be successful.

It may be that the printer driver is not compatible.

1.Delete the printer driver on the guest machine: After uninstalling it in the device manager, if you want to completely delete the printer driver, you should click on the file in the menu bar in the start-control panel-printers and faxes, select server properties-drivers, and delete the printer driver here to completely remove the printer driver (if you can't delete it, go to the second step directly).

local port) – enter the hostname next printer shared name (for example: www-845ba19 hp1020) Note: Letters are case.

The next step is to replace the existing printer driver and install it.

3.The host has a username and password, and you need to enter the username and password (and remember the password) The steps are as follows: Start - Run - Enter the host IP address - A dialog box will appear to enter the username and password.

It took three days to summarize the solution, which was relatively long, and I wrote it in the blog. Web Links.

Reason analysis] Because different systems access the computer connected to the printer, there may not be a corresponding driver. So unsuccessful. Then you can install all the drivers on the computer with a printer, and this problem is solved.

After determining whether the shared folders can be opened in the same group between machines, go to Settings - Printers - Add - Network Printers - Browse Printers, find the shared printer, and then install it.

In addition,The printer is not a com port,I also have a Taiwan Founder computer has not been connected,The driver does not print normally,I have to change to the XP version with the printer。

Workaround: <>

2. Then open the "Control Panel" - View Devices and Printers.

3. Click "Add Printer".

4. At this time, there will be a network to let the shared printer on the network, click on this printer, and then click on Select.

5. The printer will be added successfully, and then connect again, there will be no problem of "driver not found" when connecting to the shared printer.

Solution and steps:

7. Then in the driver option of the open window, click [Update Driver] to complete the driver update installation, and the problem of not finding the driver when connecting to the shared printer is solved, as shown in the figure.

There are many reasons for this problem, such as a change in the IP address or computer name of the host, or a disabled guest (or guest user) user of the computer. This can happen if your computer's sharing settings have changed. To put it bluntly, there is a problem with the link between your computer and the shared host.

You click Yes, reinstall the driver, and that's it...

The problem is that your computer doesn't have this printer driver.,So you want to install the driver on this computer.,It's very simple.,The general printer's driver XP is collected in your point Yes.。

You click Yes and it's done, and it will automatically install the driver for the shared printer, and then it's ready to use!

Have you installed the driver? It's the disc that came with the printer when you bought it, and it's ready to go after it's installed

First, set up a shared printer on the computer of the local printer.

At this point, you can add a network printer. You can usually find it yourself.

Reinstall it and go to the official ** to find it.

Win7 can see the shared printers in the network, but when the driver is installed, it prompts that it cannot be connected because the "Enable file and printer sharing" option is not turned on, and you can turn it on.

Tools Material: Take win7 system as an example.

1. First, on the desktop, click on the "Start" icon.

2. Then in that interface, click on the "Control Panel" option.

3. After that, on the pop-up window, click on the "Network and Sharing Center" option.

4. Then on the pop-up window, select the "Enable File and Printer Sharing" option.

5. Then on the pop-up window, click the "Save & Modify" button.

6. Continue on the pop-up window and click on the "Network" icon.

7. Then, on the pop-up window, click on the computer where the shared printer is located in the network.

8. Then on the pop-up window, the shared printer is displayed.

9. Finally, on the pop-up window, double-click to open the shared printer in the display network.

Hello, it is caused by the shutdown of the printer driver in the computer, which prevents the user from installing the printer driver, and the solution is as follows;

1. First, click on the Start menu and click on "Control Panel".

2. Then in the "Control Panel" window, click "Administrative Tools", 3. Then in "Administrative Tools"."window, click "Local Security Policy", 4, then in the "Local Security Policy" window, click "Local Policy", then click "Security Options", 5, in the "Security Options" window, find "Device: Prevent users from installing printer drivers", right-click, click "Properties".

6. In the Local Security Settings window, set the"Enabled" is checked on. Then tap "Apply" and tap "OK".

7. At this time, "Device: Prevent users from installing printer drivers" shows the running state, and you can close the window.

It's good to reinstall the system system problem.

Sharing a printer is a very convenient way to print, but sometimes there are problems with installing drivers. This can be due to the following reasons:

1.Driver incompatibility: If the driver is not compatible with the operating system, it may not install properly.

2.Network connection issues: If the network connection is unstable or malfunctioning, it can cause the shared printer to fail to connect.

3.Permission issues: If you don't have enough permissions to install the driver, then the installation process will be rejected.

How do I fix problems installing drivers for shared printers?

2.Check your internet connection: Make sure you have a stable internet connection. If your network connection is unstable, try restarting your router or adjusting your network settings.

3.Get Administrator Privileges: If you don't have enough privileges to install the Driver Sliding program, try running the installer as administrator.

4.Try manual installation: If the automatic installation fails, try installing the driver manually.

On the computer where the printer is shared, open the Hail Device Manager, find the shared printer, right-click and select Update Driver, then manually select the driver to install.

In conclusion, there may be some issues when sharing printers to install drivers, but as long as you follow the solutions above, the problem will most likely be resolved.