What s going on with the IWC watch stopping at night

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

There will be after-sales ** on your warranty link, call after-sales ** to inquire about the after-sales address.

Hello, the phenomenon of stealing stops in general mechanical watches may be.

1.Insufficient power: mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when they are slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of exercise, and it can be directly manually wound to supplement the power.

2.No maintenance: mechanical watches are generally maintained once every 2 to 3 years, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of each gear for a long time will produce iron filings, increase the friction between the gears, this kind of problem only needs to clean the movement, re-refueling.

3.Shock: A mechanical watch has a complex structure and is composed of hundreds of precision parts, which is very fragile, and the watch is subjected to a strong impact, and the parts in the movement may loosen and cause the watch to slow down or stop.

According to the reason why the watch is slow, you can take corresponding measures, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.

Stop, there may be the following reasons:

1. See if the crown is pulled out, the crown is pulled out, and the watch stops.

2. Whether the second hand touches the glass, there will be a circle mark on the glass.

3. Whether the three watch hands are not well balanced, causing contact and causing stopping.

4. Whether the battery is exhausted or not, it generally needs to be replaced in 1-2 years.

Either I haven't worn it for a long time, or the watch has broken energy storage clockwork. The mechanical watch needs to be worn for about 8 hours, and it can be stored for 24-48 hours.

There are many reasons for the watch to stop secretly, but in addition to malfunctions, there are also problems with wearing habits that lead to insufficient power and stop-and-go. There are also yes, first of all, make sure that you have enough time to wear it every day, see if this situation will happen, and don't take it off and put it on the table as soon as you get to the office or when you get home.

If you ensure at least 7-8 hours of wearing time every day, there will still be a sneak stop, then it may be because the watch needs to be washed, of course, the watch you just bought generally does not say that you need to maintain the oil immediately, but it is possible that the watch you bought is in the counter for a long time, and some of the watches that are pressed in stock may be placed in the counter for a long time, if the counter has not been sold, put the watch for several years, because the internal lubricating oil is naturally aging, it is also necessary to wash the oil, Of course, this situation is very rare, because after all, it will not go away if you put it there, but it will not age so quickly if you put the lubricating oil.

Hello, it is possible that the watch is magnetized or the power is insufficient.

Generally, the normal winding takes 30 times, and it is basically full, (provided that you want to be full) The winding watch on your hand actually doesn't matter, as long as you keep it up until you can't turn it, the mainspring is full.

For automatic watches, because most automatic watches can be wound by hand, especially when worn for the first time or after stopping, you need to start the winding with your hand first. (It is recommended that you do not rely on the rotor to wind the full string at the beginning) everyone also knows that because the automatic watch is "not up to the string", it is recommended that the number of winding times of the automatic watch should be more than less, and you may wish to put a few more, such as up to 40 times, it is basically guaranteed to be full.

Reason for stopping:

The more common reason may be the lack of kinetic energy, automatic mechanical watches do not need to be manually wound, but to keep the mechanical watch on the hand to wear at least 8 hours of time, because the automatic mechanical watch uses the arbitrary swing of the rotor to wind up, and the rotor swings with the movement of the arm, so if the mechanical watch needs to be worn on the hand often.

But if you often wear it on your hand and don't walk, it may also be a lack of kinetic energy, and then we need to manually wind it.

After the above methods, the machine is not gone, here we can rule out the reason for the lack of kinetic energy of the mechanical watch, it should be the failure of the mechanical watch, if you are not a watch professional, it is best not to disassemble it rashly, please send it to a professional watch repairer for repair.

Watch suspension: Anyone who knows a little about mechanical watches knows that fully automatic mechanical watches are wound entirely by the swing of the arm.

Therefore, if the watch is left for too long or the amount of arm activity does not meet the requirements of the watch winding every day, the watch will cause the mainspring to be winding and the potential energy is insufficient, which will cause the watch to be unstable or stop when it is not worn at night.

If this happens, we can manually do an arc movement before the watch is placed. Or use the manual winding function to wind the watch. This keeps the watch with enough kinetic energy storage to keep it running until the next day.

Summary. 1. Some people may buy a fully automatic mechanical watch, thinking that since it is fully automatic, it is definitely not necessary to care, in fact, this is a misunderstanding, the so-called automatic mechanical watch, relying on the automatic rotor to rotate in any direction can tighten the effect of the automatic winding mechanism to operate, only the watch is worn on the hand, with the movement of the arm, the rotor also rotates to produce energy. 2. When the automatic mechanical watch stops, you should first check whether the watch is in a stationary state for a long time, if it is not worn for a long time, or it is carried on the hand, it is in a relatively stationary state for a long time, because the watch is automatically wound by the swing generated by relative movement, if the watch cannot be automatically wound, it will lose the ability to run and stop.

If this is the case, the user only needs to swing the watch a few dozen times to restore the time.

Why does my IWC watch stop if I don't wear it for a day?

1. Some people may buy a fully automatic mechanical watch, thinking that since it is fully automatic, it is definitely not necessary to care, in fact, this is a misunderstanding, the so-called automatic mechanical watch, relying on the automatic rotor to rotate in any direction can tighten the effect of the automatic winding mechanism to operate, only the watch is worn on the hand, with the movement of the arm, the rotor also rotates to produce energy. 2. When the automatic mechanical watch stops, you should first check whether the watch is in a stationary state for a long time, if it is not worn for a long time, or it is carried on the hand, it is in a relatively stationary state for a long time, because the watch is automatically wound by the swing generated by relative movement, if the watch cannot be automatically wound, it will lose the ability to run and stop. If this is the case, the user only needs to swing the watch a few dozen times to restore the time.

Can you tell us more about that?

1. Some people may buy a fully automatic mechanical watch, thinking that since it is fully automatic, it is definitely not necessary to care, in fact, this is a misunderstanding, the so-called automatic mechanical watch, relying on the automatic rotor to rotate in any direction can tighten the effect of the automatic winding mechanism to operate, only the watch is worn on the hand, with the movement of the arm, the rotor also rotates to produce energy. 2. When the automatic mechanical watch stops, you should first check whether the watch is in a stationary state for a long time, if it is not worn for a long time, or it is carried on the hand, it is in a relatively stationary state for a long time, because the watch is automatically wound by the swing generated by relative movement, if the watch cannot be automatically wound, it will lose the ability to run and stop. If this is the case, the user only needs to swing the watch a few dozen times to restore the time.

The quartz movement may not have a battery, and the mechanical movement may not have a mainspring or the movement is broken, take it to the place where the watch is repaired.

2.Because of the characteristics of the principle of time, it is affected by gravity, mechanical friction, temperature changes, usage and other reasons.

3.Mainly from the wearer's wrist activity, the wrist of the watch swings when the owner is active, so as to wind the watch, so when the wearer usually does not move much or does not wear it for a long time, the string force will be insufficient or empty, resulting in the watch is not accurate or stopped.

It is recommended to take a look at the watch repairer.

1) Mechanical watches rely on the winding of the spring to provide power to make the watch move, and there are two ways to wind mechanical watches: manual and automatic. Due to the complexity of the internal structure of the watch and the thick phenotype, it is affected by a series of reasons such as gravity, temperature changes and the use of mechanical friction. (2) If the watch is worn on the wrist to swing on the owner's wrist to make the watch wind, but if it is not active frequently, the watch will be stationary.

The string force on the top string will be insufficient or empty. As a result, the watch is inaccurate or stopped. (3) Dislocation or damage by external force.

Even if the gear of the watch is stuck, the wheel train is damaged, and the balance wheel is broken, which will also cause the watch to stop. (4) The watch is rusted by water, or the Traveler is short of oil. The watch leaked after water penetrated.

Bearings and gears are easy to be corroded by water because they are small. Causes the watch to freeze and stop. There is also the inflexibility of the automatic part due to water ingress.

The main reasons why the watch does not go are: the movement gear is misaligned, the watch is magnetized, bumps, and the oil sludge is dried for a long time when it is left on hold. The most common reason for the failure of the watch not going is the lack of power of the watch and the movement of the watch does not work.

When the mechanical watch stops, the priority is to think about whether it is caused by lack of power. Hand-wound watches should be wound at the same time every day as much as possible so that the watch can operate with sufficient energy for the next 24 hours. Quartz watches, on the other hand, can be actively wound and should be worn on the hand for more than 8 hours a day to replenish the mainspring.

Lack of exercise after wearing it will also show that the watch does not move or stop.

If the watch is used for a long time, then its wear and tear will be more serious, and the external maintenance of the watch will be easily damaged. It is necessary to regularly replace the watch you are wearing, and it is necessary to maintain the watch regularly, for the service life of your watch, it is better to maintain it regularly.

There are many reasons why mechanical watches do not go, such as: there are bumps, movement gears are misaligned, the watch is magnetized, the sludge is dried for a long time, etc., there are roughly two kinds, the first is because of insufficient kinetic energy.

Mechanical winding, electric battery changing.