The files in the USB flash drive are easily corrupted How to fix them

It's clear that the expansion disk! The next chip wizard on the Internet, according to the USB disk data detected on it, find a production tool on the Internet, mass production, and it may be able to restore to the capacity before its expansion. If there are too many bad blocks on the disk, throw them away!

No way! Don't buy expansion disks in the future, although it is cheap, it is equivalent to throwing away money!

Upstairs is right, ***'s USB flash drive is plugged and unplugged casually without damaging files!

It is recommended to buy Kingston's USB flash drive.

If the file has been stored and was previously intact, it has been opened, it can be recovered: if the file is broken when it is stored, there is basically no possibility of recovery, because he has not stored it at all.

This is not a fix.

It's the hardware problem of the USB flash drive itself. This will be the case with pirated USB flash drives.

It is recommended to change to a USB flash drive. Nothing is worry-free.

You may have bought an expanded USB flash drive, but you can't fix it but buy another one!

There is a software called Repair USB Drive! But I don't know if it helps you! Because I lost a lot of games before, and then I bought this software on the Internet. It really works!!

Go to the place where you bought a USB flash drive and ask them to help you change it to a USB flash drive to store your data. Replace your bad USB flash drive data with a new one (preferably the same USB flash drive).

That's it.

It is recommended to take the help of Hi Format Data Recovery Master.

Perform data recovery operations.

The specific steps are as follows:

Please note that the location of the software installation and the location of the deleted files cannot be the same to avoid overwriting the lost files.

Step 1: First of all, you need to open the data recovery software and select the recovery mode.

Step 2: Next, select the object to be scanned, such as a USB flash drive, and click on the "Start Scan" button.

<>Step 4: Finally, click on the "Recover" option and open the file when it is successful.

There are two main ways to recover USB flash drive data:

1. Restore from a backup

That is, to restore the original data through a backup file in your computer's hard drive or cloud storage. It's very simple, completely autonomous, and it's quick and effective, with little to no failure. But it has a very harsh premise, that is, users need to back up the files in the USB flash drive to the computer hard drive or the cloud in advance.

Without this careful preparation, this method would not have been possible.

2. Use a professional USB flash drive data recovery tool

For users who have not backed up in advance, formatting the data in the USB flash drive is not unrecoverable. There is also a wonderful way to help get back the data lost due to formatting, and that is to do USB flash drive data recovery by using a professional data recovery.

Let's take a look at the specific steps with the help of Lost Data Recovery.

Step 1: Connect the formatted USB flash drive to your computer.

Note: After the USB flash drive is formatted by mistake, remember not to perform any new read or write operations on the USB flash drive to avoid data corruption.

Step 2: RunLost data recovery software, select the "Formatted disk by mistake" function to enter, and then select the USB flash drive that we connect to the computer.

Step 3: Select the file types you need to recover, and click Scan after selecting them.

Step 4: After the scan is completed, there is a lot of data, find the files that you think are more important and must be recovered, preview them, and preview them normally, it means that the files can be recovered, after confirming the files you want to recover, check them and click the recovery button below, so that all the data can be restored to the computer.

Tools Raw materials.

Computer USB flash drive.

Here's how. 1. Back up the original files to prevent loss.

<>3. Open the software and select File Repair.

4. Then click "word repair".

5. Find the file you want to repair and repair it, as shown in the figure below

6. Finally, generate the recovery file with the original file name.