The wall hung boiler burns to the set temperature without stopping the fire, what is going on 50

1. In this case, check whether there is a problem with the setting, there are some brands of wall-hung boilers that can be set to continuous combustion, especially in winter, many people may set the wall-hung boiler to this mode in order to save trouble.

2. There is also a situation that the temperature of the room is relatively low, and the wall-hung boiler has been generating heat, but the thermal insulation performance of the room is relatively poor, or because someone upstairs or downstairs is rubbing warm, the heat of your home will be seriously lost, which will cause the indoor temperature to go up, and the wall-hung boiler will continue to work.

3. There is also a failure of the wall-hung boiler, there is a temperature sensor inside the wall-hung boiler, if there is a problem with this accessory, it will also lead to non-stop work, and the temperature sensor of the wall-hung boiler can monitor the temperature in the room.

The flow of water is small, that is, inWall-hung boilerUnder the minimum domestic hot water power, the water will be boiled very hot, to put it bluntly, the wall-hung boiler is easy to be particularly hot if the water boiled is less under certain circumstances. This situation can be considered to increaseBooster pumpsto increase water flow.

2. The minimum power of domestic hot water is large, to put it bluntly, the water flow can be satisfied, but the small fire is too large, and the small fire can be adjusted to solve the problem.

3. The tap water pressure fluctuates.

4. It may be that the temperature is broken. It is normal to have a temperature difference of about 15 degrees Celsius up and down the set temperature. For example, if you set it to 40 degrees, it will burn to about 48 degrees and stop working, and it will start burning below 32-33 degrees!

Generally speaking, every degree of temperature increase will consume 5% more energy, but the temperature of the wall-hung boiler should not be too low, so that the heating effect will not be achieved.

Generally speaking, every degree of temperature increase will consume 5% more energy, but the temperature of the wall-hung boiler should not be too low, so that the heating effect will not be achieved.

If you consider the two methods of comfort and gas saving, it is recommended that the room temperature is set at about 20 degrees, and the water temperature of the wall-hung boiler is set between 60 and 80 degrees.

If you want to heat up, you need to set it to 70 to 80 degrees.

If it can be caused by temperature difference, it can be restored to the factory setting.

The temperature control inside the boiler is transmitted through the temperature sensor, which is inherently delayed.

When the temperature you ask here arrives, does it mean that the indoor temperature reaches or the temperature of the heating temperature knob on the boiler?

What is the reason why the wall-hung boiler does not stop when it burns to the set temperature? The wall-hung boiler does not stop when it burns to the set temperature, whether you set it to stop automatically, if it is not for the large area and the temperature is not all hit. If it's not for these reasons, then you have to explain or ask the reason after sales. I hope you will adopt it, thank you.

The program of most manufacturers' controllers is set to shut down when the set temperature is reached! There are also a few brands or individual models, which use positive deviation temperature control, that is, you said that it is 5 degrees higher than the set temperature to shut down, consult the brand manufacturer to see if the electronic control program of the wall-hung boiler you use has been readjusted.

In most cases, the temperature probe is fouled or damaged, and it can be replaced; There are also individual motherboard failures. Or the heat exchanger of the wall-hung boiler is seriously blocked, and the heat exchanger needs to be cleaned.

The furnace has always been reported to be down, have you thought of this obvious problem?

If the temperature is too low, there will be no downtime.

It may be that the thermostat is malfunctioning.

Is the panel for setting the temperature of your wall-hung boiler on top of the wall-hung boiler? If it doesn't stop, will the temperature of the wall-hung boiler keep rising? The general temperature control has a floating value, such as 30 degrees you set, he may not stop until 31 degrees, then if the machine has been running, you reduce the temperature of the control panel to see if it will stop, if it does not stop, it may be that the temperature control to the wall-hung boiler control line is broken.

The thing that says the time setting is broken.

Summary. Hello! The wall-hung boiler has been working without stopping the fire, and the main reasons are as follows:

1. The problem of working mode setting: some brands of wall-hung boilers can be set up for continuous combustion to resist cold weather or excessive heat loss. In this working mode, the wall-hung furnace guard works continuously and non-stop.

This can be changed by switching to a different mode of operation. 2. The room temperature is indeed seriously heated: the thermal insulation performance of the room is relatively poor, and the surrounding neighbors have not yet heated, and the heat loss is too large, resulting in indoors, so the wall-hung boiler will continue to work.

Solution: Set the heating period of the wall-hung boiler to realize time-sharing work, and save gas consumption while ensuring the temperature of the room. 3. Failure of parts of the wall-hung boiler:

The inside of the wall-hung boiler has a very accurate temperature sensing component, which is used to monitor the temperature of each link and the working condition of each component in real time, if it fails or is damaged, it will affect the data collection of the wall-hung boiler on the current working condition. Solution: Contact the after-sales department for on-site inspection and maintenance.

The wall-hung boiler burns to the set temperature without stopping the fire, what's going on.

Hello! The main reasons for the non-stop operation of the wall-hung boiler are as follows: 1. The problem of working mode setting

Some brands of wall-hung boilers can be set up for continuous combustion to combat cold weather or excessive heat loss. In this working mode, the wall-hung furnace guard works continuously and non-stop. This can be changed by switching to a different mode of operation.

2. The room temperature is indeed seriously heated: the thermal insulation performance of the room is relatively poor, and the surrounding neighbors have not yet heated, and the heat loss is too large, resulting in indoors, so the wall-hung boiler will continue to work. Solution:

Set the heating period for the wall-hung boiler to realize time-sharing work, and save gas consumption while ensuring the room temperature. 3. Failure of parts of the wall-hung boiler: The interior of the wall-hung boiler has a very accurate temperature sensing component, which is used to monitor the temperature of each link and the working condition of each component in real time.

Solution: Contact the after-sales department for on-site inspection and maintenance.

It could be that the motherboard is broken, isn't it?

Yes. The head of the faucet was turned on to burn to 38 degrees, and the opening and closing of the faucet also worked.

It's just that the motherboard is bad.

1. Check whether there is a question about the setting, there are some brands of wall-hung boilers that can be set to continuous combustion, especially in winter, many people may set the wall-hung boiler to this mode in order to save trouble. 2. In addition, the temperature of the room is relatively low, and the wall-hung boiler has been generating heat, but the insulation performance of the room is relatively poor, or because there are people upstairs or downstairs rubbing warm, the heat at home will be seriously lost, which will cause the indoor temperature to not go up, and the wall-hung boiler will continue to work. 3. There is also a failure of the wall-hung boiler, there is a temperature sensor inside the wall-hung furnace, if there is a problem with this accessory, it will also lead to non-stop work, and the temperature sensor of the wall-hung boiler can monitor the temperature in the room. Wall.

1. Check if there is a problem with the setting, there are some brands of wall-hung boilers.

It can be set to continuous combustion, especially in the winter, many people may set the wall-hung boiler to imitate the burial mode in order to save trouble.

2. In addition, the temperature of the room is relatively low, and the wall-hung boiler has been generating heat, but the insulation performance of the room is relatively poor, or because there are people upstairs or downstairs rubbing warm, the heat at home will be seriously lost, which will cause the indoor temperature to not go up, and the wall-hung boiler will continue to work.

3. There is also a failure of the wall-hung boiler, and there is a temperature sensor inside the wall-hung boiler.

If there is a problem with this accessory, it will also cause non-stop operation, and the temperature sensor of the wall-hung boiler is able to detect the temperature in the room.

The correct antifreeze measures should be:

1. When there is no one at home for a short time (within a week of a reed), the temperature of the wall-hung boiler can be set to the lowest, and the wall-hung boiler will run at the lowest temperature.

2. When there is no one at home for a long time, all the water in the wall-hung furnace and heating system can be discharged. However, it should be noted that before this operation, please fully consider other pipes in the room, such as the water pipe, which will never freeze. Otherwise, please do not turn off the wall-hung boiler and keep it running at a low temperature.

The output power of the wall-hung boiler.

The size is selected according to the larger of the sanitary hot water load and the heating load. Usually, the sanitary hot water load of the household is greater than the heating heat load, so under the design indoor temperature, the wall-hung boiler will automatically start and stop according to the set program without human intervention.

The general problem may be a thermostat or a temperature first probe. The electrical appliances can not operate normally or run chaotically, the shutdown draft still cannot operate normally after restarting, and the main control board pants are broken first, and they cannot run normally according to the program. It is recommended to contact the after-sales service, or ask the professional maintenance personnel of this brand to check and repair.

FYI.

Is the reason why the hanging boiler does not stop burning to the set temperature because of its sensor problem? This must be replaced with a more buried Zheng Yuanbump sensor to solve such a problem.

Generally, the shutdown will be five degrees Celsius higher than the set temperature.

Hello dear! <>

The reasons and solutions for the flameout of the wall-hung boiler as soon as the temperature is high are as follows: 1. The wall-hung boiler reaches the target temperature: when the wall-hung boiler reaches the target temperature, it will definitely turn off automatically, which is a normal and positive state, and it will be ignited at a time when it is lower than a certain temperature.

If you find that the flameout of the wall-hung boiler is after the temperature has been reached, this is normal and there is no need to worry. 2. Flame inspection needle failure: When the flame detection needle can not detect the flame, this kind of failure will occur, you can observe the distance between the flame detection needle and the fire row, if the pressure is higher and lower, and the lower is higher.

3. Smoke pipe blockage: If the smoke pipe is not smooth or not plugged firmly, it will also lead to the phenomenon of automatic flameout, at this time, you can check and re-strengthen the smoke pipe, remove the foreign matter on the smoke pipe, and ensure that the smoke pipe is unobstructed. 4. Wind pressure failure:

In some places with poor environment, the wall-hung boiler that has been used for more than two years, the air pressure switch may be easy to roll out or fail, and the wind pressure failure will cause the exhaust gas produced by the combustion of the wall-hung boiler to be discharged in time and make the internal lack of oxygen, so that the gas will definitely be automatically extinguished because it cannot be burned, and the air pressure switch can be replaced.

When the wall-hung boiler burns to the set temperature, it will automatically stop burning, but the water pump is still circulating normally, and when the circulating temperature drops to 15 degrees below the set temperature (this is the design setting of the Ruineng wall-hung boiler), the wall-hung boiler will restart the combustion, so this is normal.

The gas wall-hung boiler has a strong home heating function, which can meet the heating needs of multi-bedrooms, and each room can be set at will according to the needs of the comfortable temperature, and can also decide to turn off the heating in a room separately according to the needs, and can provide a large flow of constant temperature sanitary hot water for family bathing, kitchen and other places, economical and applicable.

Different wall-hung boiler motherboards have different program settings. Some are shut down when the set temperature is reached, and the machine is turned on when the set temperature is lower than 5. Some of them exceed the set temperature for 2-5 stops, and the temperature decreases a few times before turning on.

It should be, this kind of thing will stop when it reaches a certain temperature, and it will continue when the temperature is low, and the cycle will continue.

Yes, it will stop at a certain temperature, otherwise it will catch fire.

It should be, the current level of intelligence of small household appliances is very high.

Look at the price of the wall-hung boiler, if there is a lot of money, the ghost can grind.