The navigation software can choose a high speed and not a high speed?!?

Hello: The map navigation software installed on our mobile phone can be used to set the route mode, you set the destination and click on the search to set the detailed mode to set the high speed or avoid the high speed.

I have Tencent Maps software installed on my phone, which has a fast response speed for navigation and accurate satellite positioning. After the offline map package is done in advance, the zero-traffic map mode can be turned on to complete the functions of map browsing, geographic positioning, location search, bus information query and driving navigation without network connection, even in the field and other weak network environments or non-service areas.

The navigation method without taking the high-speed is as follows:

When the navigation confirms the destination entered by the owner, it will plan the most time-saving route, and the navigation will first improve the efficiency of commuting and the principle of avoiding traffic lights to plan, generally passing through high-speed and other toll sections, which can greatly save time, but some car owners do not want to spend this unjust money, do not need to take the high-speed.

You can open the navigation to confirm the destination, there is a smart recommendation option in the lower left corner of the navigation page, and then click on the smart recommendation, there will be custom options inside, then the owner can choose according to the priority of time, high-speed priority and less charge.

If you don't want to take the highway, you can choose not to take the highway, and then click OK, and the navigation will replan the new route.

Basic Concepts of Navigation:

Roughly, the latitude of a place on Earth is the angle of north or south of the equator, latitude is usually expressed in degrees, from 0° at the equator to 90° at the north and south poles, with the latitude of the north pole being 90°n and the south pole being 90°, the sailor calculates the latitude of the northern hemisphere by aiming at the north star with a sextant and correcting the height of the eye and atmospheric refraction using a visual acuity reduction table.

The altitude of the constellation Polaris above the horizon of the Mori Tong Bridge is the latitude of the observer, within a certain range of this intensity, similar to latitude, the longitude of a place on Earth is the angular distance east or west of the original meridian or Greenwich meridian, and the longitude is usually expressed in degrees from 0° of the Greenwich meridian to 180° east and west.

For example, the longitude of Sydney east is about 151 degrees and that of New York City is 74 degrees west, and for the vast majority of history, seafarers have worked hard to determine longitude and calculate longitude if the precise time wheel of the aim is known.

In AutoNavi Map, you can open the navigation setting option in the settings interface, and choose not to take the high-speed after entering, and the navigation can avoid the high-speed.

Method 1. 1. When you are navigating, click the gear icon in the lower right corner to set it;

2. On the interface, we select the route preference;

3. After selecting, click below to finish, so that we can continue to navigate. You can try to bypass the high speed. Method 2:

1.Click Settings to open the AutoNavi Map My Interface, and click the Settings option.

2.Click Navigation Settings: On the Settings screen, click on the Navigation Settings option.

3.After entering the interface, select Don't take the high-speed.

Take AutoNavi Map as an example, directly select "Don't take the highway" in the settings.

Different navigation systems have differences in settings.

If you want to use the map software, you must first turn on the [GPS] switch of the mobile phone; 3. Step 3: Listen to the voice, then open the map app, and enter the place you want to go in the [search box]; 4. Step 4: Listen to the voice and then click [Go Here] in the lower right corner, 5. Step 5: Listen to the voice and select [Smart Recommendation] below; 6. Step 6: Listen to the voice, click [Don't take the high-speed], and then start the navigation, you can not take the high-speed.

"Gaode Map" does not take the high-speed navigation side to roll the method is as follows:

Operating environment: iphone13, "Gao Zeyou Limb Map", etc.

1. First of all, open the "AutoNavi Map".

2. Click "My" in the lower right corner to enter the personal center.

3. Click the settings icon in the upper right corner.

4. Click Navigation Settings.

5. Click "Don't take the high speed" in the route preference, and the setting is successful.

Summary. Good evening! When you find the relevant information, when you use navigation, you first enter the destination, then click on the navigation to start, and then you can choose the route, and the navigation prompts high-speed priority, recommended route and nearest route. The highway is easier to choose, and the national highway is not easy to choose.

The late Qing Dynasty has a good grip and argument! When you find the relevant information for you, when using navigation, first answer the missing input destination, and then click navigation to start, and then select the route, navigation prompts high-speed priority, recommended route and nearest route. The highway is a good choice, and the national leather trail road is not a good choice.

For you to query the relevant information to do the leakage is the car navigation pants trillion lines are can be adjusted by themselves, the general default choice of high-speed priority, if you want to take the national highway can be set to navigation not to take the high-speed. There are generally a few navigation routes, which can be freely chosen, and they have the right to choose not to go on the high-speed pure and rotten road.

Have a great day!

When many car owners travel by car, they don't like to take the highway, because they need to charge highway tolls, and they always like to avoid walking after encountering them, but the recommended route algorithm of AutoNavi Map often recommends these high-speed routes. However, it is possible to set without taking the highway, and the following is how to set it without taking the highway:

1. Open AutoNavi Map and click on the "My" column at the bottom right of the homepage;

2. Click the setting button of the gear graphic in the upper right corner of the opening page;

3. Find the navigation settings on the settings page and click to enter;

4. In AutoNavi's recommendation, set "don't take the high speed" as the priority, and click to set it.

However, if you set up not to take the high-speed, the recommendation will reduce the recommended weight of the distance itinerary, and you need to pay attention to it if you usually pay more attention to the time.

Why navigation let go off the highway and then get on the highway

Navigation let off the highway and then on the highway, often caused by the setting of the route preference, if the route preference is set to avoid congestion, then it may be the highway section in front of the blockage, after the map recognizes this situation, change the route to the owner to choose a bypass road section, bypass the congested section and then re-get on the highway.

In addition, it may also be the problem that the equipment positioning is not accurate, navigation due to inaccurate positioning, sometimes it has not arrived at the destination section, but it is recognized as arriving at the destination section, the navigation will remind the owner to get off the highway, but after a highway, the navigation is back to normal, and the owner is commanded to return to the highway again, and this kind of operation that makes people laugh and cry appears. When the owner is usually driving, he still has a certain sense of the road for the route, and cannot completely rely on navigation, and judges the right or wrong route by himself while driving.

How to set up navigation without taking the highway: 1. Open the AutoNavi map and click on the personal avatar in the upper left corner to enter the personal center. 2. Click the settings icon in the upper right corner of your personal center.

3. Click Navigation Settings. 4. Click Don't take the high speed in the route preference, and the setting is successful. Car navigation Kaichang is the use of car GPS (global positioning system) with electronic map to carry out, it can stare at the Wang Pai convenient and accurately tell the driver to go to the destination of the shortest or fastest path, is a good helper for the driver.

The first step is to open the map on the mobile phone, click in, the second step is to enter the main interface of the software, click on the personal avatar on the upper left, the third step is to enter the personal center interface, select the software settings icon at the top right, the fourth step is to set the interface, click on the navigation settings, the fifth step is to enter the map navigation settings interface, you can see that the navigation route preference is not set by default, and the sixth step is to click on the route preference without taking the high speed.

Navigation is a field of study that focuses on monitoring and controlling the process of moving a process or vehicle from one place to another. The field of navigation includes four general categories: land navigation, ocean navigation, aeronautical navigation and space navigation.

It is also an artistic term used for the expertise used by navigators to perform navigation tasks. All navigation techniques involve locating the position of a navigator compared to a known position or pattern. In a broader sense, navigation can refer to any skill or study that involves determining location and orientation.

In this sense, navigation includes orienteering and pedestrian navigation. (Photo by Chen Jie2) @2019