-
Two connections. 1. The router is used as a switch. Connect the cable pulled by the landlord to the LAN port of the router, and then your computer and your buddy's computer are connected to the LAN port without passing through the WAN port of the route, remember to change the LAN IP of the router to the back of your own setting.
Just don't conflict with existing IPs, and then set your buddy's IP to be the same as your network segment. The last digit of the IP is different. Everything else is OK like yours
2. The router is still used as a router, advanced routing, connected to the landlord's router in a static IP mode, and the IP address of the WAN port is.
The subnet gateway then modifies the LAN IP of the routerYou can change it to anything. Just don't duplicate this network segment. It can be changed to:
If you change it like this, the IP of your machine should be changed, the gateway should be changed, and your buddy's IP should be in the same network segment as yours.
-
Try to make a static route, the gateway does not need to be changed.
-
You can't use a router anymore, and you need different network segments for routers and routers. You can use the router as a switch.
The network cables of your and your friends' computers are plugged into the LAN port, and the network cables that the landlord assigned are also plugged into the LAN port, and the current router is equivalent to a switch. Definitely. You can set your own IP address or rely on DHCP.
The static route mentioned on the second floor is also the solution, and you can add the network segment to the router. You and your friends set up a network segment or other network segment.
But the speed of routing and switching is not the same. I won't say much about why.
-
It should be that the route is useless!!
-
Loose cable is one of the most common router problems, and the high-frequency attenuation is too large due to poor connection or oxidation halogenation of the crystal head contact piece, and poor line contact. Then, we need to check whether there is a problem with the connection head of the router.
After the detection, check whether there are any interspersed errors on the interface behind our router, and then proceed to the next step of detection after all the checks are completed.
We can click on the broadband connection properties of our computer desktop to enter the broadband connection properties page, and on the current page we can see the connection display settings and some option settings.
After the settings are completed, we continue to open the browser, enter it in the input bar of the browser to enter the router, and if the IP address shown in the figure shows that the successful dialing appears, click on the connection.
end's ultimate ultimate.
For those who don't know how to set up the router and related identification, we can use computer software to help us solve related problems, for example, we can use Tencent PC Manager router management to solve router problems.
-
1. Directly link the network cable with the computer instead of tp-link, and check whether the network is normal.
2. Restart the TP-Link and the computer and modern, and then reconnect them well, and see the situation of the indicator light on the TP-Link panel
System light: It should be flashing all the time, indicating that the system is functioning normally.
LAN light: should be solid on, indicating connected.
power light: It should be always on, indicating that the power supply is normal.
WAN light: It should be solid on, indicating that the wireless connection is normal.
- If you still can't access the Internet, there may be a problem with the software settings, check the software situation.
3. Open the local connection in the Windows Control Panel and check whether the local connection is "connected".
- If it is "connected".
Please click on the attribute to select all the information in the attribute (such as IP address, submask address, DNS, etc.). Change to "Automatic" (don't leave out the information in "Advanced", in short, let Windows re-fetch it all), apply and save.
There are two situations, first: your computer is poisoned by ARP, as soon as you start the Internet virus, trick other computers into sending data packets to your machine, and your computer throws away these packets, their computer will not be able to get on, use 360 to kill the virus. >>>More
I don't know what you mean by the network cable is the landlord's? It's really hard for you. >>>More
There are some reasons why routers are good and bad:
1. Hardware problems with the router itself. When encountering an unstable router signal, the first thing to consider is the router itself. For example, there is poor heat dissipation of the router in summer, and the internal hardware of the router is very hot. >>>More
VPN: The Access 101 permit IP defines security federation and key exchange policies. >>>More
Setup for both routers:
1. The router used to connect to the external network is the first router, and we will use this router as the main router. If your router is newly purchased and has been restored to factory defaults, then its IP should be... >>>More