Router problem, is the router broken?

There are some reasons why routers are good and bad:

1. Hardware problems with the router itself. When encountering an unstable router signal, the first thing to consider is the router itself. For example, there is poor heat dissipation of the router in summer, and the internal hardware of the router is very hot.

In such a situation, the user can first feel whether the temperature of the router hardware is very hot, and if it is very hot, the router should be placed in a well-ventilated place, such as near a window or in front of an electric fan. If possible, try a different router to determine the cause of the problem.

2. Update the router firmware. If you rule out the heating problem or there is no router to replace nearby, you can update the router firmware and try to set the router again. Note that when upgrading the router firmware, you can back up the router information to facilitate the restoration after completion.

3. The problem of placement. The transmission distance of the router signal is limited, and the attenuation will be even more severe when encountering obstacles. Therefore, the placement of the router plays a crucial role in whether the wifi signal can cover the entire home.

4. The signal of the wireless router is interfered with. If there are some interfering devices near the wireless router, it is also easy to cause signal instability, such as multiple routers together, and the frequency band channel between multiple routers and routers is the same or adjacent, which may also cause this problem, which is relatively rare.

Wireless routers come and go, and instability doesn't necessarily mean that the router is damaged. The reasons why you can rent wild energy are as follows:

1. There may be a strong signal interference source next to the wireless router;

2. The router firmware and hardware do not match, causing the router to work abnormally, resulting in an unstable "wifi" connection;

3. The "Wi-Fi" optimization function is enabled on the mobile phone, and the connection function in poor condition is not used, and the connection to "Wi-Fi" is not checked in the dormant state. Turning on these features will disconnect the phone from the wireless router in certain environments;

4. The transmission power of the wireless router "wifi" is too small, or the device is too far away from the router, and there is a shield in the middle. If the "wifi" signal is too weak, it will also drop from time to time;

5. When there are multiple wireless routers nearby, the same channel may have an impact on each other's posture.

6. The hardware of the router "wifi" transmitter module or the mobile phone "wifi" receiving module is faulty, resulting in the "wifi" being disconnected.

Router Broken Symptoms:There is no network, resulting in mobile phones, computers and other devices cannot access the Internet;

The indicators of the router are not lit;

Failed to log in to the router control page;

The WAN interface of the router is not lit;

The router cannot be factory reset;

The connection is often dropped when in use, and the network is unstable.

Router Broken Workaround:1. The router does not respond because there is a problem with the power cord or power supply, you can check the power supply of the router first to see if there is a problem, if not, check the power cord of the router, and replace the new power cord in the case of badness.

2. If the parts are damaged, you need to buy the parts of the same model, remove the broken parts, and replace them with new parts. If the bayonet of the router is out of order, it is generally because a component inside the router fails, if you don't know how to replace the parts, it is recommended to send it directly to a professional maintenance point for maintenance.

3. When the router has a drop in network speed, you can touch the surface of the router with your hands, if the surface of the router is very hot, it means that the stability of its hall section is not very good, and the quality of the hardware equipment is also relatively poor, it is recommended to directly replace the hardware equipment to enhance the heat dissipation performance of the router.

1. No Internet access. From the above, it can be seen that you can't access the Internet without a router. So, if you find that your home network suddenly can't be used by chance, you need to consider whether the router is broken.

You can restart your router a few times and try it a few times, and if the network is not working yet, then there is a good chance that your router has been scrapped.

2. The router drops. When you use your computer to connect to the network, you have failed repeatedly and have been unable to connect to the network, then there must be something wrong with your router. At this time, you can ask the maintenance personnel to take a look, or look up some solutions on the Internet yourself.

3. Miscellaneous. In fact, there are many symptoms of router damage, such as the indicator light is not on, you can't find it, and so on. In view of these symptoms, you can look for some maintenance methods for it, and you can also let some professionals help analyze it, but you must not be too anxious!