What is the reason why the router is connected to the router, and the second router network will hav

Setup for both routers:

1. The router used to connect to the external network is the first router, and we will use this router as the main router. If your router is newly purchased and has been restored to factory defaults, then its IP should be...

2. Connect to the network with a network cable or wirelessly, it is recommended to use a wired connection;

3. Open a web browser.

admin and password admin,:

4. First of all, set the router to connect to the external network.

Click "Network Parameters" on the left, and then select "WAN Port Settings".

5. Select "PPPoe" in "WAN port connection type", enter the correct password, click "Save" at the bottom, save about 10 clocks, and then click "Connect".

6. The DHCP service needs to be enabled on the first router. On the left, select DHCP Server, and then select DHCP Service

7. Set the "DHCP Server" on the right to "Enable".

8. Finally, in order to log in to the router in the future, it is necessary to confirm or change the same network segment as the IP in the router background management IP and the DHCP address pool.

For example, if the address is different from the DHCP segment, you need to manually change the IP address of the computer to static and set the gateway to the router IP address to log in to the router background when logging in to the router in the future.

10. Restart the router after the setup is complete. If the router does not reboot automatically, you can select "Reboot System" under "System Tools" on the left

Step 2 Configure the second router.

All but the first router need to disable their DHCP function.

1. Similarly, connect the second router with a network cable and log in to the background management interface of the second router. If its IP is.

2. Open the browser, enter the background management IP", and then press the enter key.

3. After entering the administrator account and password, click "OK" to open the background management interface;

4. Select "DHCP Server" on the left, and then select "DHCP Service".

5. Set the "DHCP server" on the right to "Do not enable" and restart the router.

Note that the IP of both routers cannot be the same.

The IP address of your second route is not set.

Hello, the reason why you can't get online is that the second router is not set up correctly.

Here's how to set up the second router:

1. The computer is single-connected to the router (one end of the network cable is connected to any LAN port of the router, and the other end is connected to the computer) 2. The computer browser enters the login address and the back of the router is marked) 3. The pop-up interface and password are entered admin (the back of the router is marked) 4. Click the LAN port setting to change the IP network segment to avoid conflict with the IP network segment of the first router;

5. Save and exit, set the WAN port to dynamic IP in the Internet mode, turn on the DHCP server, save and exit.

6. Save and restart the router after setting the wireless and key settings.

7. The WAN port of the router can be connected to any LAN port of the first router with a network cable to access the Internet.

Note: The login IP of the second router is:

1. Restore the road or beam to factory settings. Press and hold the reset button for 5 seconds until all the lights of the router come on together, release and the router can be restored to factory settings.

2. Connect to the wireless router, look at the bottom of the router, mark the router address Beida, enter this address in the browser, the address of the general router is.

3. Set up the Internet mode, and choose PPPOE for home Internet access

4. Enter the password provided by the network operator.

5. Set the wireless router signal and wireless password.

The SSID is the name of the wireless network (can be set according to actual needs), select WPA-PSK WPA2-PSK and set the PSK wireless password vertically, and click Next.

6. The setting is completed and the network is tested.

Summary. In the pop-up interface, we set the IP address and DNS address to be obtained automatically, and then click OK.

The second router is set up to show that it is connected, why can't I surf the Internet yet?

Dear, I am your exclusive answer Wang Min tutor, the question you consulted, I have seen, now I will help you find the answer, please wait a while, I will give you the most professional, thank you again for your question, serve you my honor, I wish you a happy life [Bixin].

Hello dear,1When the router and network cable are connected but can not access the Internet,Then it may be directly related to our settings,We click the Microsoft button in the lower left corner of the computer,The pop-up interface,We click Settings;

2 pop-up interface, we click on Network and Internet;

3. In the pop-up interface, we click to change the adapter option;

04 The interface that pops up, we right-click on Ethernet, and then click on Properties;

05 pops up the interface, we double-click on the Internet Protocol version 4;

06 pop-up interface, we set all IP addresses and DNS addresses to be obtained automatically, and then click OK.

Summary. 1. It is caused by faulty network connection settings or wrong router configuration;

2. Reset the network connection and re-obtain the IP address and DNS address, which will solve the problem of not being able to access the Internet.

The router connection is normal, but there is no network, what is going on? The router is plugged into another router with a network, why is there no network in the stupid Is there anything that needs to be set up Sun Xin.

1. It is caused by the network connection setting, Qiyu or router configuration error; 2. Reset the network connection and re-obtain the IP address and DNS address, which will solve the problem of not being able to access the Internet.

How to reset settings.

The router will be turned off for a while and restarted.

The questions are very detailed, and I will give you my personal opinion;

I work in a carrier, majoring in router switches.

1.Your problem must have been encountered by someone, since I am engaged in this industry, I have made it to friends, classmates, colleagues, including myself.

2.Your problem is not universal, because the cause of the fault is difficult to judge, the general router is old, there will be such an appearance, I would suggest replacing the router or turning off the router for a period of time after turning on it will be temporarily repaired, and finally replaced with a new router. This is counted as one, home routers are always unstable, and such problems generally occur one after another in a few months to about 1 year.

This is for sure, I haven't seen a few routers that have been stable for more than 3 years (home type), which is a suspicion.

3.As an operator, there are many places where the operator access is set up with the account binding function, which is generally the MAC address binding of the device that connects to the dial-up bandwidth for the first time, and then dials again with other devices, which will prompt problems such as account errors. This is a good solution, directly let the customer service reset the port (there is no such service in some areas, the customer service can reset the account and password of the dial-up Internet), which can generally be effectively solved, and is a fundamental solution to the problem of not being able to access the Internet.

In some regions, customer service will use this to deceive customers by saying that they can only connect to one computer, but this is less common now).

4.Technically, there is no data that will cause you to have a conflict in this situation, and it is likely that your situation is caused by the instability of the operator's access equipment. Because we have encountered situations when the device is unstable, there is an increase in latency, there is packet loss, these can cause you to encounter the situation.

5.In terms of layout in a macro sense, generally a region will have a bus to manage the traffic of all cells and Internet users in this area, and if it is during peak periods, it will definitely have the effect of experiencing slowness.

Summary: Personally, I think it is caused by the fourth point I said, and this problem is difficult to troubleshoot, unless the entire device and network architecture are checked, there is almost a rough fault point.

It is estimated that the lease period of your DHCP server is too short, this is generally a problem with the DHCP server, you can set it a little longer and try it. There is also a possibility that the wireless router is too hot, and you buy a mini fan to try cooling it.

A1The reasons that may cause broadband disconnection are: unstable power supply voltage, static electricity of computer network card chassis, computer poisoning, system software failure, etc., it is recommended that you give priority to self-inspection or ask computer maintenance personnel to assist you in troubleshooting.

2.You can check whether the modem and splitter hardware are faulty, whether the splitter is connected correctly, and whether the modem is compatible with the network card.

3.If the connection is disconnected while playing the game, it may be related to the application server, so it is recommended that you contact the game provider to verify.

Is it wireless or wired? If it is only wireless, you can first check whether your router has DHCP turned on, and whether the IP address and DNS of your computer are set to be obtained automatically.

Also, I don't know what network connection mode you use, is it ADSL or fiber? Is there a modem? Is the modem a cat and routing all-in-one?

This is generally caused by uneven bandwidth usage, and there may be other terminals running something with a lot of traffic.

Try it when the router is powered off, maybe it's because of the phone.

There may be the following situations when encountering such a situation:

1.The router is faulty. If the router itself is faulty, it is recommended to switch with the manufacturer.

2.There is a problem with the route settings. Factory reset the router and set it up again.

3.There is a fault in the network. Hit **Consult the operator to see if there is any problem with the network.