The computer doesn t turn on, what happens if the computer doesn t turn on?

Updated on number 2024-04-19
12 answers
  1. Anonymous users2024-02-08

    Our company's Lenovo computer also can't be turned on, the fan will turn and stop for a while, and the computer indicator will be on and off.

    After testing, the motherboard is broken, and you have to contact the maintenance department.

  2. Anonymous users2024-02-07

    It could be that the CPU temperature is too high!

    The temperature is high, and the computer automatically shuts down!

    No matter how you open it, you can't afford it!

  3. Anonymous users2024-02-06

    Root Cause Lessons:

    Memory instructions can not be read, this is a problem that often occurs in the use of the computer, the cause is very complex, it will be difficult to eliminate for a while and a half, but it doesn't matter, press OK, cancel, restart, you can. Interested netizens can try to solve the problem with the following methods:

    1. There are too many programs open, if there are too many documents or too many programs running at the same time, and there is not enough memory to run other programs, you should close the programs and windows that you don't use at any time.

    2. There are too many programs that run automatically, close some startup programs, start-run-msconfig---start, in addition to anti-virus software, input methods, general programs can be turned off.

    3. Illegal operation, the system cannot be executed.

    4. CPU and graphics card heat dissipation problems, improve heat dissipation.

    5. The physical memory is too small, and the virtual memory setting is unreasonable; The memory and motherboard are not plugged in properly or other hardware is not compatible, reinsert the memory or change the socket; If the memory module is broken, replace the memory module; Dual memory is not compatible, using the same brand of memory or only one memory; Memory quality issues Replace the memory module.

    6. If there is a problem with the hard disk, scan to repair or replace the hard disk.

    7. Driver problem: Reinstall and update the driver.

    8. Software damage and reinstallation of software; The software has bugs, patch or update to the latest version; The software is incompatible with the system: patch the software or try the compatibility mode of the system; There is a conflict between the software and the software If you have recently installed something new, try uninstalling it.

    9. Virus problem anti-virus; Antivirus software conflicts with the system or software Since the antivirus software enters the underlying monitoring system, it may conflict with some software, so try uninstalling it.

    10. There is a problem with the system itself Sometimes the operating system itself will have bugs, so it is best to install the official update program and reinstall the system if necessary. Otherwise, the machine will be lost.

    Good luck.

  4. Anonymous users2024-02-05

    It should be a short circuit on the motherboard.

  5. Anonymous users2024-02-04

    It must be a motherboard issue.

  6. Anonymous users2024-02-03

    You touch the case, feel hot, the fastest way, open the case, remove some dust, turn on the electric fan, don't use the fan to blow to the CPU and wait for him to cool down, then you can turn it on, if it doesn't work, consider replacing the hardware.

  7. Anonymous users2024-02-02

    Haven't you cleaned the inside of your chassis since you entered the summer?

  8. Anonymous users2024-02-01

    The first thing you need to do is check if your computer is damp, and then there are many computers that can't be turned on if there are dewdrops or water on the motherboard.

  9. Anonymous users2024-01-31

    The computer cannot be turned on, which proves that the system program of the computer has been severely damaged and the system needs to be reinstalled.

  10. Anonymous users2024-01-30

    Welcome to Henan Xinhua to visit and learn about free trial courses and reimbursement of travel expenses.

  11. Anonymous users2024-01-29

    It means that the most basic hardware of the computer is working normally, so there is no alarm sound.

    You check whether there is a problem with the computer hard disk, whether the hard disk partition is correct, whether there is an active partition, from what you said, the problem is on the hard disk, not the problem they said upstairs.

  12. Anonymous users2024-01-28

    Is there an audible alarm when booting up, if not, redo the system to see.

Related questions
16 answers2024-04-19

No signal input"To be sure, this must be a matter of data transfer: >>>More

10 answers2024-04-19

This problem is very hard to say,Some BIOS can't initialize the hard disk information and don't display,You can take the hard disk down,And take down the memory to boot it up,And then install it,If the optical drive can't be opened,I think it's the strong current that hasn't been added.,You can take a look at the strong current port.,There's also a possibility that your graphics card is broken.,But if your memory is broken.,And there's an integrated graphics card.,There won't be a display.,What I can judge now is these problems., By the way, do you have a problem with the power supply? The last question is whether the power supply on your motherboard has been added? If you add it, you can consider the above problems, I have encountered a single problem in the company, and the combination is not necessarily the original reason, I hope mine can help you,

12 answers2024-04-19

Is it always automatic repair when booting up? And you can start the system after repairing, but there will be automatic repair when you turn it on again after shutting it down? If this is the case, it means that your hard disk is broken, and it is not serious now, take it to the repair point to scan the hard disk, and repair the hard disk track; Don't wait for this every time.,This happened to me before.,In the end, even the automatic repair can't make win7 start normally.,Finally, I changed the hard disk.。

21 answers2024-04-19

The voice of the long sound is that the memory is not detected, you don't plug in the CPU, hehe, I won't talk about this, of course there is no reaction, the head is gone, do you say people can still talk? >>>More

12 answers2024-04-19

The hardware isn't plugged in.

Reinsert everything on the board. >>>More