What is the problem of E5 refrigerator in China and South Korea?

Refrigerator malfunction** Meaning: E1: Short-circuit or open circuit of the refrigerator sensor.

E2: Short circuit or open circuit of the microfreeze chamber sensor. e3：

Short-circuited or open freezer sensors. E4: Short circuit or open circuit of the ring temperature sensor.

e5: E2PROM has a read and write failure. e6 ：

Over-temperature alarm, the freezing temperature continues to be too high. e7: Communication is unqualified.

e8: Zero crossing is unqualified. h：

Indicates that the temperature in the corresponding temperature zone is too high. l: The temperature of the corresponding temperature zone is too low.

Door opening alarm icon flashing: non-fault, prompts the user to close the door.

If the refrigerator has an E5 fault code.

1. We first need to check the heat dissipation of the external unit of the air conditioner, if there is a failure in the heat dissipation of the external unit, we can find maintenance personnel to deal with it.

2. It may be because of the voltage problem, which requires us to install a voltage regulator.

3. It may also be because the control board is faulty and needs to be replaced.

This kind of failure in the refrigerator** is mostly caused by damage to the control panel.

One of his internal structures is malfunctioning, so it can't be used.

Glad to ask you a question, one point of the problem is that this refrigerator is made in Korea and is very famous.

What is the problem of sending five freezers in China and South Korea, I really haven't used this freezer, I don't know what the problem is, I can tell if I know.

What is the problem with the F5 refrigerator in China and South Korea? What is the problem with F5 on the fridge? You can look it up according to the instructions, and then you can ask the after-sales service if you don't understand it, and he will answer you one by one.

It should be the supervisor's fault, find a professional master to repair it.

The refrigerator shows that E5 is E2Prom and has a read and write fault.

Cause of failure: 1. Turn on the refrigerator for the first time or after a long time of power failure.

2. Open the freezer door of the refrigerator for a long time.

3. Put a large amount of food in the freezer at one time.

4. Air-cooled refrigerators, when the refrigerator door is not closed well or the user opens the door for a long time, an alarm will also be generated.

5. The thermostat of the refrigerator is not adjusted properly.

6. The program in the display board may be subject to external electromagnetic interference, as long as it is not a frequent alarm, there should be no problem.

Other refrigerator failures**:

E1: Short-circuit or open circuit of the refrigerator sensor.

E2: Short circuit or open circuit of the microfreeze chamber sensor.

E3: Freezer sensor short-circuited or open-circuited.

E4: Short circuit or open circuit of the ring temperature sensor.

e5: E2PROM has a read and write failure.

E6: Over-temperature alarm, the freezing temperature continues to be too high.

e7: Communication is unqualified.

e8: Zero crossing is unqualified.

h: The temperature in the corresponding temperature zone is too high.

l: The temperature of the corresponding temperature zone is too low.

Refrigerator repairs. Regardless of whether there is a leak in the system, the concentration of isobutane in the area of all ignition electrical devices cannot reach the ** limit. Because isobutane is heavier than air, good ventilation conditions are required at the service site. When pouring refrigerant, in order to avoid the possibility of static electricity and sparks, all equipment must be reliably grounded, all wiring must be firm, and no misconnection is allowed.

a. First of all, check whether there is a fire source in the surrounding environment, and maintain good ventilation;

b. Prepare special equipment and accessories for maintenance;

c. Check the safety of maintenance equipment and power supply.

Fault cause: communication failure and mistaken machine detection mode. Solution: It is recommended to unplug the power plug of the refrigerator, wait for 10 minutes and then power on again, and then observe, the E2PROM has a read and write failure. Need to report for repair.

It is necessary to check the heat dissipation of the external unit of the air conditioner, if there is a failure in the heat dissipation of the external unit, you can find a maintenance personnel to deal with it, it may be because of the voltage problem, which is the need to install a voltage regulator. It is also possible that the control board is faulty and needs to be replaced.

Precautions for refrigerator use.

Before the refrigerator arrives at home, be sure to determine the location of the refrigerator, the refrigerator should be placed in a cool and ventilated place, and a distance of 10cm should be reserved between the sides of the refrigerator and the back and the wall to help the refrigerator dissipate heat.

Raw and cooked food should be separated: the temperature of raw and cooked food is different, and cooked food should be put until it has cooled before putting it in the refrigerator, preferably in a bowl or plate, not on the evaporator, which is unhygienic and not easy to take out.

Pipa line and parallel order (Bai Juyi).

Refrigerator malfunction** expression meaning:

E1: Short-circuit or open circuit of the refrigerator sensor.

E2: Short circuit or open circuit of the microfreeze chamber sensor.

E3: Freezer sensor short-circuited or open-circuited.

E4: Short circuit or open circuit of the ring temperature sensor.

e5: E2PROM has a read and write failure.

E6: Over-temperature alarm, the freezing temperature continues to be too high.

e7: Communication is unqualified.

e8: Zero crossing is unqualified.

h: The temperature in the corresponding temperature zone is too high.

l: The temperature of the corresponding temperature zone is too low.

Door opening alarm icon flashing: non-fault, prompts the user to close the door.

Hello, I am glad to answer for you: the reason why the refrigerator displays E5: 1. The refrigerator refrigerant is insufficient, generally only the refrigerator will be used for a long time, if the refrigerant is insufficient, the refrigerator refrigeration effect will be problematic, you can open the outer panel of the refrigerator compressor, you can observe whether there is frost on the copper pipe connected to the compressor, if there is more frost, it means that the refrigerant is insufficient, and the refrigerant needs to be added in time.

2. If the refrigerator compressor is damaged, if the refrigerator is not refrigerated, you carefully check whether the lights in the refrigerator room are still on, if the lights in the refrigerator room are normal, it means that the power is normal, if the refrigerator is not refrigerated and the compressor is not working, if it is not thermal protection, it is likely that there is a problem with the compressor, if there is a problem with the compressor, then you can only find a professional refrigerator maintenance master to repair. 3. Refrigerator compressor thermal protection When the compressor of the refrigerator is running at high speed, the refrigerator compressor keeps running, especially for a long time of high-speed operation, you will find that both sides of the refrigerator at home will be very hot, hotter than normal refrigeration, at this time, the refrigerator compressor will start to work when it is hot, and the refrigerator compressor will stop running, at this time you will not hear the sound of the compressor working normally, because the compressor is in a state of thermal protection, and the compressor will not run. The reason is that the refrigerator is not refrigerated due to the thermal protection of the refrigerator compressor, and then after the refrigerator is powered off and dissipated, the thermostat is turned on again and adjusted to the middle gear, and the refrigerator will resume normal refrigeration.

It is E2Prom read and write failure, this problem is generally not a particularly big problem, you only need to turn off the power of the refrigerator when this problem occurs, wait for 30 minutes, and then turn on the machine, of course, if there is still E5, it is a machine failure, you need to contact the after-sales service, call the after-sales service to arrange professional maintenance personnel to deal with it.

Some of the problems that exist in the use of the refrigerator are:

There are all kinds of faults**, and there are some faults that may occur on the refrigerator in the book of spring difference**, and specific information will be written down when the fault occurs**, so it is best to carefully read the instructions for use of the refrigerator when buying a refrigerator, so that you can know what to do when the refrigerator has some faults**.

There is a problem of unevenness when installing the refrigerator: the refrigerator needs to be balanced, if it is uneven, it will cause the refrigerator to make a loud noise, affecting daily life, so when placing the refrigerator, you need to adjust the four corners of the refrigerator to balance, and you need to reserve a gap of about 10 cm around the refrigerator so that the refrigerator can dissipate heat.

If there is a most likely problem, the refrigerator door is not closed tightly when opening and closing the refrigerator door, so pay attention to closing the refrigerator door in daily life.

It is E2Prom read and write failure, this problem is generally not a particularly big problem, you only need to turn off the power of the refrigerator when this problem occurs, wait for 30 minutes, and then turn on the machine, of course, if there is still E5, it is a machine failure, you need to contact the after-sales service, call the after-sales service to arrange professional maintenance personnel to deal with it.

Some of the problems that exist in the use of the refrigerator are:

There are all kinds of faults**, and there are some faults that may occur on the refrigerator in the book of spring difference**, and specific information will be written down when the fault occurs**, so it is best to carefully read the instructions for use of the refrigerator when buying a refrigerator, so that you can know what to do when the refrigerator has some faults**.

There is a problem of unevenness when installing the refrigerator: the refrigerator needs to be balanced, if it is uneven, it will cause the refrigerator to make a loud noise, affecting daily life, so when placing the refrigerator, you need to adjust the four corners of the refrigerator to balance, and you need to reserve a gap of about 10 cm around the refrigerator so that the refrigerator can dissipate heat.

If there is a most likely problem, the refrigerator door is not closed tightly when opening and closing the refrigerator door, so pay attention to closing the refrigerator door in daily life.

It is E2Prom read and write failure, this problem is generally not a particularly big problem, you only need to turn off the power of the refrigerator when this problem occurs, wait for 30 minutes, and then turn on the machine, of course, if there is still E5, it is a machine failure, you need to contact the after-sales service, call the after-sales service to arrange professional maintenance personnel to deal with it.

Some of the problems that exist in the use of the refrigerator are:

There are all kinds of faults**, and there are some faults that may occur on the refrigerator in the book of spring difference**, and specific information will be written down when the fault occurs**, so it is best to carefully read the instructions for use of the refrigerator when buying a refrigerator, so that you can know what to do when the refrigerator has some faults**.

There is a problem of unevenness when installing the refrigerator: the refrigerator needs to be balanced, if it is uneven, it will cause the refrigerator to make a loud noise, affecting daily life, so when placing the refrigerator, you need to adjust the four corners of the refrigerator to balance, and you need to reserve a gap of about 10 cm around the refrigerator so that the refrigerator can dissipate heat.

If there is a most likely problem, the refrigerator door is not closed tightly when opening and closing the refrigerator door, so pay attention to closing the refrigerator door in daily life.