Who can help me set up the virtual machine and the host to access the Internet at the same time?

First, set the host IP address, DNS, etc., and then enable the virtual machine, select the NAT Internet access option, and set the virtual machine IP to be automatically found. Okay, now.

The host and virtual machine can now access the Internet at the same time. Simple, huh.

Please note the following details:

1.I'm using VMware Workstation

2.The operating system installed on the virtual machine should be unified with the host (for example, if your host is Windows XP Pro SP2, then your virtual machine should also be installed with Windows XP Pro SP2).

3.About NAT network: The host and virtual machine can share the Internet at the same time.

If you don't select NAT when installing"In network mode, select "NAT" in the "Ethernet" network connection of the virtual machine device, and then run the installation folder"Start the service. cmd", run the third ---DHCP and NAT Service - Shared Internet Access", and the Microsoft Security Authentication prompt pops up, please click "Continue to install" and wait a while. After installation, go to the virtual machine window point """-virtual network device", start the "dhcp" and "NAT" services respectively in the "virtual network" window, you don't need to establish a "broadband connection" in the virtual machine, and the host and the virtual machine don't need to make other network settings, restart the virtual machine, after the host broadband connection, the virtual machine can directly run the Internet Explorer browser.

As far as I know, some versions need to right-click the "network card icon" and select "connection" for the first time after starting the host, so that you can access the Internet. Also, some lite VMs may not be able to use their "virtual network settings", so they can only use "bridged" to surf the Internet.

My host and virtual machine can access the Internet at the same time, but I don't know what your specific situation is, but I can tell me about my settings for reference.

My host is XP operating system, Internet access mode: ADSL broadband Internet access.

The virtual machine is VMware Workstation

The virtual machine is running the Hongqi Linux desktop operating system.

First, make the broadband connection of the host in the connected state, that is, the host can access the Internet normally, then open the virtual machine software interface, select the [Ethernet] item in the [Device] column, double-click to appear a dialog box, and then select the "NAT" option under "Network Connection", and click [OK].

Start the virtual machine ......

After entering the Linux operating system, select the "General" tab in the "Wired Network Configuration Tool" dialog box of the operating system, and select "Use DHCP" in the "IP Settings" column, so you do not need to fill in the IP address, subnet mask, gateway, DNS, etc., and then click [OK].

At this time, the Internet Explorer in XP and the Firefox browser in Linux can access the Internet normally.

The key is to see what way you use to surf the Internet, it is recommended to set it to a public IP with the host, so that you basically don't need to change anything.

The answer is this:

1.If the server is their own, the two ** can share a virtual host, that is, their own server.

2.If it is a space service provider, it is impossible to share one virtual host with two different contents, and it is okay for two domain names to point to the same virtual host, and it is impossible to have different contents.

3.The IP of the two is the same, and the other will definitely be blocked.

Therefore, it is necessary to use two independent IPs, and furthermore, the content is legal and not afraid of blocking.

How to set up a LAN between a VMware virtual machine and a host:

1. After installing the virtual machine VMware, you can see two more virtual network cards in the network connection, VMware Network Adapter VMNet1 and VMware

2. Set up the network, use the wireless network (if it is a local connection, the setting method is the same), right-click to select the wireless network connection, select Advanced in the properties window, check Allow other network users to connect through the Internet connection of this computer, and in the home network connection, select VMware

3. Check the network connection properties of VMware Network Adapter VMNet8, which is automatically set to ,.

4. Start the virtual machine, enter the virtual machine operating system, set the network connection of the virtual machine, set the IP to, the subnet mask to, and the gateway to the gateway to VMware

network adapter

VMNet8 virtual network card IP address), DNS is set to the DNS of the host network connection, (the DNS of the connection to the external network, using the wireless network connection, so find the DNS of the wireless network connection, if it is a broadband connection, it is the DNS of the local connection).

There are many reasons why the same network segment cannot communicate with each other, please describe the details.

Do you use NAT or bridging to provide the network to the virtual machines?

What operating system are the host and virtual machine?

Are the firewalls open on both sides?

Is there a VLAN configuration?

Actually, no, just install VMware Tools

You can directly drag files into the virtual machine.

As long as the IP address is in the same network segment, they can access each other.

If you want to be able to copy things from each other, then after opening VMware, the VM --- install VMware Tools, and you can copy things from each other by installing that tool.

The network card in VMware is set to Bridge: directly connected to the physical network.

Do not use NAT to connect (this is the default one).

Install VMware's driver package and then set it up on the host to share.

The NIC needs to be set to bridge mode!

Please pass it on to me, o( o thank you.

VM virtual machine hard disk to add the foundation and realize local LAN access.

This is achievable.

It's just that you need a software that can change the rabbit **.

Find a suitable one by yourself and solve the network lag.

It must be a different IP to surf the Internet, and the MAC address is definitely different.

There are three ways for virtual machines to access the Internet:

Bridged mode: The virtual host and the host are in the same network segment, which is equivalent to a computer for the local area network.

NAT mode: This method can also achieve bidirectional access between the local system and the virtual system. However, other machines in the network cannot access the virtual system, and the virtual system can access other machines in the network through the local system using the NAT protocol.