It doesn t work to restart, how to solve it? 50

Translated: "Bootmgr boot BAI sequence is compressed, please press Ctrl+Alt+Del to restart DU" Well, the reason for this is that the boot disk is compressed, resulting in the boot file cannot be loaded. The fix is ......Find a win7 installation disk,Start from the installation disk,It's OK to start and repair。

Then remember to turn off the compression of the boot disk after successfully booting up!

The system crashes and the reboot is not likely to work, you can only reinstall the system.

It is recommended to reinstall the system. Don't use the ghost system and you'll be fine.

1. Check whether the external wiring of the computer is connected, and plug in each cable again to see if the fault is eliminated.

2. If the fault persists, then open the main chassis to check whether there is any excess metal in the chassis, or a short circuit caused by the deformation of the motherboard, and smell whether there is a burning paste in the chassis, whether there are burned chips on the motherboard, and whether the capacitors around the CPU are damaged.

3. If not, clean up the dust on the motherboard, and then check whether the computer is normal.

4. If the fault persists, then unplug the reset cable on the motherboard and connect it with other switches and indicator lights, and then use the short-circuit switch to see if it can be turned on.

5. If you can't turn it on, then use the minimum system method, unplug the data cable of the hard disk, floppy drive, and optical drive, and then check whether the computer can be turned on. Then connect the above devices to the computer one by one, when connecting a certain device, the fault will recur, indicating that the fault is caused by this device, and finally focus on checking this device.

Dear users, hello:

The system can be installed by following the steps below:

1.Buy a win7 disc and put the system disc into the CD-ROM drive.

2.Turn on the power and then observe the on-screen prompt to press "F2" for BIOS settings before booting the system.

3.Set the startup mode. Find the boot option, there is the first boot, generally 1st boot device, move the cursor to it, press the enter key to go in and select the item with the word ***, press the enter key to confirm.

4.Some of the key methods for moving the cursor are the arrow keys of the keyboard, and some are f5 and f6, which are prompted by the screen. Then press F10, select Yes, press Enter to confirm, and then the computer will automatically restart.

5.At this time, boot from the disc when starting, enter the installation system interface, follow the system prompts, step by step, and the installation process will be restarted many times.

China Telecom provides the best quality network communication services, old friends for new phones, Internet age cash, 100 Gigabit broadband free experience, ultra-clear TV ITV, telecom activities can be directly queried through the business hall.