-
The specific solution for rebooting the computer is as follows:
1.Power supply problems: The power supply voltage is insufficient, and the power-consuming hardware in the chassis becomes more or the power consumption increases, which causes the voltage of the power supply output to drop sharply, which in turn leads to the unstable operation of the computer system.
Eventually, the computer will automatically restart. Unstable voltages can also cause damage to other electrical equipment.
Solution: Go to a regular store to buy a piece of *** power supply and replace it.
2.Memory issues: Memory issues can also cause the system to restart automatically. Memory errors are usually caused by poor contacts or damaged memory modules.
Solution: If it is a poor contact, it may be because there are rust spots on the chip interface below, use a rubber sassafras to sassastass it, and then install it back. If it's damaged, you can only go and buy a good memory module.
3.Fan issues: If the internal fan speed of the computer is too low, the heat dissipation will not be able to be dissipated, which in turn will cause the internal temperature of the case to be too high, which will also cause the system to restart automatically.
Solution: Replace a fan with high power and fast speed.
Software issues. 1.Virus problem: Some viruses such as "blaster virus" will prompt the user to automatically restart the computer after 60 seconds, or there is a Trojan virus that takes control of the computer, causing the user's computer to constantly restart automatically.
Solution: Clear the Trojan horse and virus software, and reinstall the system.
2.Problems with the user's own settings for the system: If the user has set up in the "Scheduled Taskbar" to restart or load certain workers, it will automatically restart after a certain period of time, etc. When the time is up, the computer system will automatically restart according to the user's settings.
Solution: Turn on Startup. Check if there are any executable files or other scheduled work programs that you are not familiar with. If there is, turn it off and then turn it back on to check.
-
If there is a repeated restart, it may be caused by xi tong, or the hard disk failure, it is best to go to the computer after-sales service to do a system check.
-
If the computer restarts repeatedly is automatic, then you have to test the power supply, if you restart repeatedly by yourself then it is because there is a problem with the hardware, you need to test the hardware, not that every time you restart the computer can be turned on, then restarting the computer is not a panacea.
-
When we use the computer, sometimes the computer can not be restarted repeatedly after booting into the system, I think it is caused by the following reasons:
1. It may be that there is an incompatibility between the system or programs, press F8 to move to the advanced option when you boot up, and select "The latest correct configuration" to enter the repair, and it is not possible to press F8 to enter the safe mode to restore the system or reinstall the system.
2. The CPU or other hardware temperature is too high, and the memory and graphics card are incompatible or faulty.
3. If the hard disk has bad sectors, please use the system's built-in functions or software to repair the disk, or format the hard disk to repartition and reinstall the system.
4. Change the default automatic restart of the system: right-click on My Computer Properties Advanced Settings in Startup and Failure Recovery Remove the check mark before "Auto Restart" in System Failure, and then press OK and Apply to restart the computer.
Precautions for computer use.
Normally, if we get the laptop, it will definitely turn on directly, and it will not be able to boot normally, and the correct way is to use a power adapter to connect with the laptop, and the laptop can be activated by powering on, and it will be successfully turned on.
When using the computer, the sitting posture must be correct, and there must be a certain distance from the screen, if you are too close to the screen, the impact on the eyes is also relatively large, and its electromagnetic radiation is also very large, preferably half a meter away.
-
There can be many reasons why your computer fails to turn on after repeated restarts, such as hardware failure, system problems, virus infection, etc., and different solutions are required for different reasons. Here are some common workarounds:
1.Check the hardware: You can check whether the hardware such as power supply, memory module, and hard disk is normal, and you can replace damaged parts if needed.
2.Troubleshoot external devices: Sometimes the failure to turn on the device may be caused by the failure of external devices (such as keyboard, mouse, plug, etc.), you can try to unplug these devices and turn them back on.
3.Enter Safe Mode: If something happens with your system that causes you to restart repeatedly, you can try to enter Safe Mode, then repair your system or uninstall the problematic software.
4.Update Drivers: You can try to update your system drivers, sometimes older versions of drivers will cause repeated reboots to prevent you from turning on.
5.Scan and kill viruses: Computer infection with viruses will also cause repeated reboots and failure to boot, you can try to use antivirus software to scan and clean up.
If none of the above methods can solve the problem, it is recommended to consult a computer-related professional to help solve the problem.
Restart repeatedly, you first see if the CPU self-test passes, but the hard disk self-test passes. Try unplugging and plugging the memory module back in, as a reboot can also be caused by a memory read error. >>>More
You may have fallen for a worm, commonly known as a worm, and your virus database has been updated. Do you know that you haven't upgraded to the latest version yet? Then try it out as follows. >>>More
The problem you are causing should be too much dust, because the computer case is not completely enclosed, and static electricity will attract dust, so dust can easily enter the computer. When dust adheres to the surface of the integrated circuit, it will cause poor heat dissipation, and in severe cases, it will cause a short circuit. Optical drives, floppy drives, and displays are most afraid of optical drives. >>>More
Enter safe mode (press F8 wildly when powered on).
Right-click on my computer --- properties --- advanced ---"System failure recovery"Set --- handles"Automatic restart"The tick is removed. >>>More
Turn on the computer and keep pressing F8 and then select the last configuration.