The oil light of the Touran keeps flashing red, and the oil light of the Volkswagen Touran gas throt

The oil indicator is used to show the pressure of the oil in the engine. Under normal circumstances, when the key door is opened, the indicator light will light up and turn off after starting. If you are old, there may be the following problems:

1.The oil quantity is insufficient, resulting in a drop in oil pressure;

2.If the engine temperature is too high, the oil will become thinner, causing the oil pressure to drop;

3.When the oil pump parts are damaged or the gap is too large due to wear and assembly, it will cause the failure of the oil pump not producing oil or insufficient oil output;

4.The fitting gap between the crankshaft and the large and small tiles is improper, too tight will increase the oil pressure, and too loose will reduce the oil pressure;

5.Blockage of oil filters and suction discs will also reduce oil pressure;

6.Damage or failure of the oil return valve: If the spring fatigue of the oil return valve of the main oil channel is softened or improperly adjusted, and the mating surface of the valve seat and the steel ball is worn or stuck by dirt and closed tightly, the oil return volume will increase significantly, and the oil pressure of the main oil channel will also decrease;

7.Improper selection of engine oil: If the wrong oil or grade is not selected properly, the leakage will increase due to the low viscosity of the engine oil when the engine is running, so that the oil pressure will be reduced;

Hello, stop and check if the oil volume is normal, if there is too much missing, then go to add oil as soon as possible, or change the oil, if the oil is enough, then there may be a problem with the sensor. Need to check it, I wish you a happy life and safe driving [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello. Turn off the engine and check the oil level. If normal. Check the oil pressure sensor. Happy car. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, in this case, you have to turn off the engine immediately and can't continue to drive, which is the lack of oil pressure, which can easily lead to serious phenomena such as pulling the cylinder.

This situation is generally caused by the blockage of the pump or coarse filter, I hope it will help you [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello. This means that the engine oil is lacking and needs to be replenished as soon as possible.

I hope it can help you [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello Check if the engine is short of oil. Whether the oil pressure is too low. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

It is recommended to turn off the engine to check the amount of oil, if it is not enough, it is best not to go first, call ** to ask someone to send the oil to add [If there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The engine oil is lost, so it should be good to add some to re-board the car.

Check whether the engine oil is enough [If there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello: When the oil light is on, it is recommended that you stop the car immediately for inspection. So as to avoid abnormal wear and tear of the engine due to low oil pressure.

There are two reasons for this.

The first possibility is that there is less oil. Or maybe the oil pump is worn. This results in low oil pressure.

Second. It could be an oil induction plug. It's broken. Cause the oil lamp to be lit indiscriminately.

It is recommended to go to the repair shop to check both aspects.

Have a nice ride! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

In two cases, one is a display fault, such as a faulty oil pressure sensor, which can be resolved by replacing the oil pressure sensor. The second is a substantial failure, such as a blockage of the oil pump or a failure that does not pump oil, and also a blockage of the oil channel. In this case, mechanical repairs are required.

But this problem needs to be solved in a timely manner. Because you don't know the specific problem point, you don't have to form a real fault and have a fault point that extends to other components.

1.Stop and check the oil level: After stopping, wait for the engine to cool down, then open the hood, find the oil level gauge and check the oil level.

If the oil level is below the minimum mark, the oil level is insufficient. At this point, you need to add the right amount of oil so that the oil level is between the lowest and highest marking lines.

2.Check the oil pump and pressure sensor: If the oil level is normal, but the oil light is still on, it may be caused by a malfunction of the excite's oil pump or pressure sensor. At this time, it is necessary to go to a professional repair shop for inspection and repair.

3.Check the oil filter: If the oil filter is too dirty or clogged, it can also cause the oil pressure to be insufficient, causing the oil light to come on. At this point, the oil filter needs to be replaced.

It should be noted that if the oil light is on, it means that the engine is already in a dangerous state, and it is recommended to stop immediately and take corresponding measures to avoid engine damage and safety accidents. At the same time, it is recommended to change the oil and oil filter regularly to ensure the normal operation and long-term use of the engine.

The reasons why the oil light is on are: 1. The engine temperature is too high and the oil becomes thinner, and the oil is lost from the mating gap in large quantities, resulting in a drop in oil pressure; 2. The oil volume of the oil pump is not enough, so that the oil volume of the oil pump is reduced, or the oil cannot be pumped due to the air intake, resulting in the oil pressure dropping; 3. The matching gap between the crankshaft and the large and small tiles is improper, too tight will increase the oil pressure, and too loose will reduce the oil pressure; 4. When the oil pump parts are damaged or the gap is too large due to wear and assembly, it will cause the oil pump to produce no oil or insufficient oil; 5. The blockage of the oil filter and suction plate will also reduce the oil pressure; 6. If the wrong oil is used or the oil label is not properly selected, the leakage will be increased due to the low viscosity of the engine oil when the engine is running, and the oil pressure will be reduced; 7. If the fatigue softening or improper adjustment of the spring of the oil return valve of the main oil channel, the mating surface of the valve seat and the steel ball is worn or stuck by dirt and is not closed tightly, the oil return volume will increase significantly, and the oil pressure of the main oil channel will also decrease; 8. There is oil leakage and blockage in the oil pipeline.

Engine oil plays an important role in the normal driving of the car, and the normal range of oil pressure can also ensure that the oil is transmitted to the engine normally to help it work normally. The following are several common reasons why the oil warning light is on, hoping to help the majority of car owners better protect their cars.

Tools Raw materials.

Oil alarm light, instrument panel.

Step Method.

The oil volume of the engine oil is insufficient, so that the oil volume of the oil pump is reduced or the oil cannot be pumped due to air intake, resulting in the oil pressure dropping;

If the engine temperature is too high, it is easy to thin the oil, and a large amount of oil pressure will be lost from the mating gap, resulting in a drop in oil pressure;

When the oil pump parts are damaged or the gap is too large due to wear and assembly, it will cause the failure of the oil pump not producing oil or insufficient oil output;

The fitting gap between the crankshaft and the large and small tiles is improper, too tight will increase the oil pressure, and too loose will reduce the oil pressure;

The car's oil light is on, probably due to the decrease in the amount of oil in the car's engine, and this is the time to add new oil.

The reason why the oil lamp is on:

1. The oil volume of the engine oil is insufficient, so that the oil volume of the oil pump is reduced or the pump cannot be pumped due to air intake, resulting in the oil pressure dropping, which leads to the problem of the oil lamp being lit.

2. If the engine temperature is too high, it is easy to thin the oil, and a large amount of oil pressure will drop due to a large loss from the mating gap, which will lead to the problem of the oil lamp being lit.

3. When the oil pump parts are damaged or the gap is too large due to wear and assembly, it will cause the failure of the oil pump not producing oil or insufficient oil output, which will cause the problem of oil lamp on.

4. The matching gap between the crankshaft and the large and small tiles is improper, too tight will increase the oil pressure, and too loose will reduce the oil pressure; Blockage of oil filters and suction discs will also reduce oil pressure;

5. Damage or failure of the oil return valve: when the spring fatigue of the oil return valve of the main oil channel is softened or adjusted improperly, and the mating surface of the valve seat and the steel ball is worn or stuck by dirt and closed tightly, the oil return volume will increase significantly, and the oil pressure of the main oil channel will also decrease.

6. Improper selection of engine oil: when the wrong or improper brand selection is used, the leakage will be increased due to the low viscosity of the engine oil when the engine is running, so that the oil pressure will be reduced; There is oil leakage and blockage in the oil pipeline.

First check if the oil level is sufficient. Not enough please add. If enough is enough to check the following:

1. Check whether the plug of the oil induction plug is loose and whether there is poor contact.

2. Test the oil pressure. If the pressure is normal, replace the oil induction plug.

3. If the pressure is low, it is necessary to check: whether the oil is too thin, whether the oil pump filter is blocked, whether the oil pump is worn, whether the size of the tile is worn, causing pressure relief, and whether the engine oil passage is blocked.

Hope it helps. [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Fault analysis: 1. Considering the insufficient amount of oil, after many times of checking the oil volume for the upper limit of the oil dipstick, it should be completely sufficient.

2. Considering that the oil pan and filter screen are too dirty and blocked, they were found to be not dirty after being removed, but they were still comprehensively cleaned.

3. Considering that the viscosity of the oil is not correct after the oil label is replaced, the oil pressure sensing plug cannot sense enough pressure to form an alarm.

So I changed the oil with a higher viscosity and tested it, and the results still alarmed.

4. At present, the oil pressure sensing plug is being ordered, and it is ready to be checked after replacing this accessory.

Too little oil Add some oil [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

1. The oil volume of the engine oil is insufficient, so that the oil volume of the oil pump is reduced or the pump cannot be oiled due to air intake, resulting in the oil pressure dropping;

2. The engine temperature is too high, which is easy to thin the oil, and a large amount of oil pressure is lost from the mating gap, resulting in a drop in oil pressure;

3. When the oil pump parts are damaged or the gap is too large due to wear and assembly, it will cause the failure of the oil pump not producing oil or insufficient oil output;

4. The matching gap between the crankshaft and the large and small tiles is improper, too tight will increase the oil pressure, and too loose will reduce the oil pressure;

5. The blockage of the oil filter and suction plate will also reduce the oil pressure;

6. Damage or failure of the oil return valve: if the spring fatigue of the oil return valve of the main oil channel is softened or adjusted improperly, and the mating surface of the valve seat and the steel ball is worn or stuck by dirt and closed tightly, the oil return volume will increase significantly, and the oil pressure of the main oil channel will also decrease;

7. Improper selection of engine oil: if the wrong use or improper selection of the brand, the leakage will be increased due to the low viscosity of the engine oil when the engine is running, so that the oil pressure will be reduced;

8. There is oil leakage and blockage in the oil pipeline.

Faulty bulbs need to be inspected and repaired in-store. It could be a faulty light line. If the check is normal, the faulty lamp can be ruled out.

When driving at night, it is the light bulb that ensures the safety of the vehicle and illuminates the road. A good car bulb can provide you with higher brightness and better vision, and it can also improve driving comfort and safety.

With the use of lights, the brightness of the bulb gradually decreases. This normal physical phenomenon is called light attenuation. Dimming the light is easy to cause accidents, so once the light is dimmed, it must be replaced in time, not until it is broken.

Check the lights regularly and replace the bulbs every 20,000 km. After 5 minutes of engine shutdown, the bulb can be replaced. The color temperature of a car bulb determines the color of the light.

It turns out that the matching lights are basically yellow. If the color temperature is increased appropriately, a more stylish white light and a more comfortable driving experience can be obtained. However, the higher the color temperature, the better.

If the color temperature exceeds 6000K, the light penetration will be reduced, which is not conducive to driving in rainy and foggy days. Therefore, for your driving safety, you should choose a safe and effective color temperature car bulb. Before replacing the car bulb, you should only replace the bulb after the engine has been turned off for 5 minutes.

Gloves and protective eyewear are required. Wipe fingerprints or grease from the outside of the bulb housing with alcohol. Do not touch the glass surface of the bulb with your bare hands to avoid shortening the life of the bulb due to fingerprint contamination of the glass case.

After replacing the bulb, adjust the light to avoid glare.

Millions of car purchase subsidies.