-
When the iPhone (unlocked) is charging, there is an Apple logo flashing and flashing, and the reason why it can't be turned on: the system has an error, and a white apple appears.
The system needs to be restored, and the operation is:
2.Connect the device to the computer with a data cable, and iTunes will automatically install the driver after recognizing the device.
3.Click on "Restore System" and follow the iTunes instructions to restore the system.
1.The current is unstable.
2.The plug is loose.
3.Poor interface contact.
Reasons why the iPhone can't be charged:
1.The first flush of the iphone 6 does not have to be charged for 12 hours, it only needs to be fully charged; The iPhone 6 can actually be charged at any power level, and it has little impact on the battery.
2.The iPhone 6 can actually be charged at any power level, and it has little impact on the battery.
3.It is best to have a complete release and charging process once a week. That is, from red to full, that is, it is best to achieve a battery that is almost exhausted once a week, and then fully charged.
4.iPhone6 has the function of overshoot protection for the mobile phone, but it is still recommended to unplug the mobile phone after it is fully charged, and it is not recommended to charge it for a long time.
5.When the iphone6 is charged to 100%, unplugging the charger is the best moment, charging 100% and charging for another hour, the battery power when unplugging the charger is not just 100% full, that is to say, after being fully charged, the iphone6 has entered the overshoot protection and has stopped charging, and the next time is only the battery consumption process, so there is no need to charge more.
-
Summary. Hello dear, there are several reasons for this:
1. The phone is stuck and causes the Apple logo to flash when charging.
2. There is a problem with the phone system that causes the Apple logo to flash when charging.
Why does the Apple logo keep flashing when the Apple phone is charging?
Hello, dear, there are several reasons for this situation: 1. The mobile phone is stuck and causes the Apple logo to flash when charging. 2. There is a problem with the phone system that causes the Apple logo to flash when charging.
The solution is as follows: 1. Long press and hold the [Power Off button] of the phone to restart the phone and try again. 2. Find [Settings] on the desktop of the phone, click to enter, find [General], click to enter, find [Restore], click to enter, and click [Reset All Settings].
-
Summary. In general, there are three possibilities for this to happen! The first is the problem of the mobile phone itself, it may be that the charging port is broken, and the contact surface inside is seriously worn due to long-term improper use, resulting in poor contact with the charging tail plug, in this case, it is recommended to go to a professional after-sales point for maintenance!
The second situation is the problem of the charger, it may be that the core of the charging cable is about to be broken somewhere, or the contact between the head and tail plug is poor, it is recommended to change the charging cable or charging head to try!
The third is the most common! That's the plug is not plugged in! In this case, it can be detected in a different place!
The lightning icon keeps flashing for iPhone charging.
Hello dear! I have seen your question here, and I am trying to sort out the answers of several friends, and I will give you a reply in five minutes, please wait a moment! ^
What is the reason why the Apple phone always appears lightning.
Dear Hello, the lightning icon of the Apple mobile phone charging has been flashing: 1. The lightning logo will appear in the middle of the electric beam chachi icon when the Apple mobile phone is charging, because the charging version of the mobile phone has been upgraded, so the charging icon has also changed. 2. When the mobile phone is upgraded to iOS7 or above, as long as the iPhone is connected, the lightning sign will be displayed during the whole charging process to the full charge of the charging button, instead of the plug will be displayed when the battery is fully charged like the iOS6 system.
In general, there are three possibilities for this to happen! The first is the problem of the mobile phone itself, it may be that the charging port is broken, and the long-term improper use leads to serious wear and tear on the contact surface of the Ming Roll Yu inside, resulting in poor contact with the charging tail plug. The second situation is the problem of the charger, it may be that the charging cable is about to break somewhere in the line, or the head and tail plug are not in good contact, it is recommended to change a charging cable or charging head to try!
The third is the most common! That's the plug is not plugged in! In this case, it can be detected in a different place!
-
Summary. A flashing iPhone charging indicator icon can be one of the following issues:1
Poor contact of the charging plug: The plug or charging cable may not be fully inserted or damaged. You can check that the plug and charging cable are clean and plug them back in.
2.Damaged charger: The charger itself may be faulty.
You can replace another charger and try again. 3.The iPhone port is dirty:
There may be dust or dirt on the charging port of your iPhone, causing poor contact, and you can wipe it with a dry, dust-free cloth. 4.iPhone battery aging:
If your iPhone has been used for a long time, battery aging may be one of the reasons why the charging indicator icon is flashing. You can try replacing the battery. If none of the above methods work, it is recommended to go to an official Apple service center for repair and testing.
A flashing iPhone charging indicator icon can be one of the following issues:1Poor contact of the charging plug:
The plug or charging cable may not be fully inserted or damaged. You can check that the plug and charging cable are clean and plug them back in. 2.
Damaged charger: The charger itself may be faulty. It is possible to replace another charger and sell it up and try again.
3.Dirty iPhone port: There may be dust or dirt on the charging port of your iPhone, resulting in poor contact, you can use a dry, dust-free cloth to wipe down a shed.
4.iPhone Battery Aging: If your iPhone has been used for a long time, battery aging may be one of the reasons for the charging indicator icon to flash.
You can try replacing the battery. If none of the above methods work, it is recommended to go to an official Apple service center for repair and testing.
When it is charged to 80%, the charging icon will drop for a while.
For example, when your battery is charged to about 80%, the charging icon often drops, most likely because you are using fast charging or fast charger. When the battery charge is recharged and sold to more than 80%, in order to protect the battery life, the phone will automatically reduce the charging speed. At this time, if you continue to use fast charging or fast charger, the phone will have an overcurrent protection mechanism, which will cause the charging diagram to be removed and dropped to protect the battery from damage.
Therefore, it is recommended that you switch to a regular charger when charging to 80% to ensure battery life and safety. At the same time, you can also try to keep your phone in a well-ventilated area to help dissipate heat and avoid the adverse effects of overheating.
It is the original charger.
Yes dear. Apple's original charger is fast charging.
There will be a battery protection mechanism.
So what should be done.
It's okay. You can contact after-sales.
Try changing the charger.
There are many reasons why your phone shows a black screen, system issues, software conflicts. If the screen is damaged, it will be illuminated as a black screen, and it is generally recommended to perform the following steps to troubleshoot and deal with it: >>>More
How to deal with the iPhone that still has battery left but often automatically shuts down and restarts: >>>More
Dear Lenovo users, Hello.
Your problem is usually a failure of the hard disk or motherboard, it is recommended that you send it to the nearest service station for testing and repair. >>>More
1. Press the Power + Volume Down buttons at the same time to force a restart. >>>More
Crash refers to a situation in which an abrupt exit interruption occurs when opening an application on a mobile device (e.g., iOS, Android device) (similar to a Windows application crash). Most of the manifestations are: the application screen flashes and then falls back to the desktop. >>>More