What s going on with the computer saying that it is restricted or no connection 15

It's the place where the crystal head of your network cable is in bad contact! Or maybe the network card is broken! This happened to me in my computer lab as well!

Try it by touching the crystal head to the network card with your hand! See if the network connection of the computer will be intermittent, if there is a problem with the crystal head, you can make a new crystal head! If not, then you find an individual network card to replace it, see if there is a problem, you can judge whether the network card is broken!

There is a problem with the physical link of the network, it may also be the network card, you try to replace the network cable and the network card!

If you don't want to see the prompt, turn off the prompt in the properties.

If you guess correctly, you should be using a wireless network, this situation is caused by a weak signal, how to deal with it:

1.You need to make sure that you are connected to the correct wireless network, the farther away the signal is, the weaker the signal, and try to connect to the closest network to your computer.

2.The ranger is broken. It is recommended to replace the roadfinder or the antenna of the roadgamer, or connect the network cable directly to the computer, so that you can know whether it is a network problem or a roadgamer's problem.

Wondering if you're using a road rover. If you connect directly with the cat, you can directly use broadband dial-up Internet access, and you don't have to worry about the restricted connection, and be careful not to disable the restricted connection, in that case, you will terminate the connection if you disable the dial-up.

Your computer should automatically get the IP address, right, when you don't manually enter the IP, some network cards will not get the local IP, it will be displayed limited, but the dial-up connection should not be affected!!

There is a problem with the physical link of the network, if it is ADLS, you should check the ** line first.

If this happens, it should be a problem with the network. Check if the network is working.

Hello, it is a pleasure to serve you and give you the following answers:1Reason:

Restricted computer network connection: It may be due to a problem with the network settings, such as the firewall settings in the network settings, or due to the failure of network equipment, such as routers, network cables, etc. No connection to the computer:

It may be due to a malfunction of network equipment, such as routers, network cables, etc., or due to problems with network settings, such as firewall settings in network settings. 2.Workaround:

The computer network connection is restricted: 1) Check the firewall settings in the network settings to make sure the firewall settings are correct; 2) Check the network equipment to ensure that the network equipment is working properly; 3) Reconnect to the network and make sure the network connection is normal. No connection to the computer:

1) Check the network equipment to ensure that the network equipment is working properly; 2) Check the firewall settings in the network settings to make sure the firewall settings are correct; 3) Reconnect to the network and make sure the network connection is normal. 3.Personal Tips:

When using your computer, you should regularly check your network settings and network devices to make sure your network connection is working. If you find that the network connection is restricted or no connection, you should take measures to solve the problem in time to avoid affecting normal use.

Summary. Hello dear, when encountering "local connection is restricted or no connection", there are two situations: 1. The computer is connected to the cat optical modem; 2. Connect the computer to the router.

The computer shows what's going on with a restricted or no connection.

Hello dear, when encountering "local connection is restricted or no connection", there are two situations: 1. The computer is connected to the cat optical modem; 2. Connect the computer to the router.

Excuse me, but please go into more detail?

If your computer is directly connected to the modem or optical modem to surf the Internet, the "local connection is restricted or no connection" appears, which will not affect the normal Internet access. If you don't think this is beautiful, you can go to the "Properties" option of "Local Connection" and set an IP address at will. 2. Computer connection to the router If your computer is connected to the router to surf the Internet, at this time, the prompt "local connection is restricted or no connection" appears, most of the time it is caused by the unsuccessful Internet setting of the router.

Solution: 1. Check the IP address settings on the computer first, whether it has been set to automatically obtain (dynamic IP),; If it is not automatically obtained, please set the computer IP address to be obtained automatically, if not, please click to read the article: How to set the dynamic IP address of the computer.

2. Correctly connect the computer and the router: (1) ** line Internet access: Please prepare 2 short network cables, one network cable is used to connect the WAN interface between ADSL Moden (cat) and the router; Another network cable is used to connect any of the LAN (1, 2, 3, 4) ports on the router to the computer.

2) Optical brazing Internet access: Please prepare 2 network cables, one network cable is used to connect the WAN interface between the optical modem and the router; Another network cable is used to connect any of the LAN (1, 2, 3, 4) ports on the router to the computer. (3) Network cable home Internet access:

Prepare one network cable and plug the home network cable provided by the broadband operator into the WAN port of the router. Then connect the network cable you have prepared, one end to the computer, and the other end to any LAN (1 2 3 4) port on the router.

Hello, it is a pleasure to serve you and give you the following answers:1Reason:

Restricted computer network connection: It may be due to improper network settings, or a malfunctioning network device that is causing your network connection to be restricted. No connection to the computer:

It may be due to a malfunctioning network device, or an improper network setting, which prevents the computer from connecting to the network. 2.Workaround:

Computer network connection is restricted: 1) Check the network equipment to ensure that the network equipment is working properly; 2) Check the network settings to make sure the network settings are correct; 3) Restart the network device to make sure the network device is working properly; 4) Restart your computer and make sure the network connection is working. No connection to the computer:

1) Check the network equipment to ensure that the network equipment is working properly; 2) Check the network settings to make sure the network settings are correct; 3) Restart the network device to make sure the network device is working properly; 4) Restart your computer and make sure the network connection is working. 3.Personal Tips:

When using your computer, you should regularly check your network equipment and network settings to make sure your network connection is working. If you find that the network connection is restricted or no connection, you should restart the network device and computer in time to ensure that the network connection is normal.

Summary. Hello, it is a pleasure to serve you and give you the following answer: when the computer shows that it is restricted or no connection, it may be caused by a problem with the network connection.

It could be due to a faulty network device, or a problem with the configuration of the network device, which is causing the network to not work properly. In addition, due to the intrusion of malware such as viruses and Trojans, it may also lead to limited or impossible network connection. Therefore, if the computer shows that it is restricted or no connection, you should first check whether the network device is working normally, confirm whether the configuration of the network device is correct, and then check whether the computer is infected by viruses or Trojans, and take timely measures to remove the malware to ensure the normal operation of the network.

The computer shows what's going on with a restricted or no connection.

I'm sorry I don't understand, but can you elaborate on that?

Hello, it is a pleasure to serve you and give you the following answer: when the computer shows that it is restricted or no connection, it may be caused by a problem with the network connection. It could be due to a faulty network device, or a problem with the configuration of the network device, which is causing the network to not work properly.

In addition, due to the intrusion of malware such as viruses and Trojans, it may also lead to limited or impossible network connection. Therefore, if the computer shows that it is restricted or no connection, you should first check whether the network device is working normally, confirm whether the configuration of the network device is correct, and then check whether the computer is infected by viruses or Trojans, and take timely measures to remove the malware to ensure the normal operation of the network.