Use a USB flash drive to make the computer the system can t start

There are omissions upstairs.

In fact, USB flash drive mounting systems are now very popular.

U disk because of the traditional disc storage system information is more convenient, more flexible, has more people to use to install the system, it can be said, as long as the motherboard supports U disk start, you can directly use the U disk to install the system, for those motherboards can not directly use the U disk system, you can find a disc with PE, or a disc with ghost, start, and then through the boot, call the mirror file in the U disk to install the system.

And the U disk has the flexibility of data, you can wipe it if you want to, and you can save it if you want to, and the disc is not so convenient.

Hehe. But the U disk installation system, it requires a certain amount of knowledge and grasp, of course, the premise is that you need to say upstairs, the mirror file you are looking for must be stable and reliable, and then it is a formal recovery.

Of course, I also encountered a lot of problems that could not be started after installation, and the problem was not that the mirror file was not good, but that it was in the C drive partition, not the active partition.

The landlord can try it, after using PE or partition software, such as PQ, go in to see if the C disk is not an active partition, if so, activate the C disk as the active partition, and click to rebuild the MBR data, and then save it and exit it.

You can go directly to the system.

Good luck.

Hope mine can help you :".

Re-next system, your U disk tool is not supported, you can install the next hard disk installation tool, after entering the PE, use the hard disk installation tool to select the system you want to install and install it directly.

There is a problem with your own system! It is recommended to reinstall the system.

<><3. Select the default mode for all modes, and click "Start Production";

4. Click "OK" to format the USB flash drive to start making the PE boot disk;

5. After the production is completed, click "No", unplug the USB flash drive and insert it into your computer;

6. Enter the PE menu after starting from the U disk, select or enter, and run the PE system;

7. Double-click [PE One-click Installation] to open the installation tool, select the system ISO path for the image path, and click the drop-down box to select the GHO file;

8. Then click [Restore Partition], select the system installation location, usually C drive, or select according to the volume label and disk size, and click OK;

9. A dialog box pops up, check Restart and Boot Repair after checking, and then click Yes;

10. In this interface, perform the operation of decompressing the system to the C drive, which takes about 5 minutes;

11. After the operation is completed, the computer will automatically restart, and the old peach USB flash drive will be pulled out at this time, and the installation system and configuration process will be automatically executed;

12. The installation process needs to be restarted many times, and the whole installation process takes about 5-10 minutes until the boot enters the new system desktop and the system installation is completed.