-
Only Windows7 can have the function of system booting
-
What kind of USB flash drive is yours? If it's ***,mp4 or something,It's impossible to read.,That is to say, if there are two USB flash drive symbols in the computer at the same time,,It's not readable.,I used to be the same.γ But later, it was OK to use a 4G USB flash drive; But I don't usually install the system like this, my method:
I usually save the gho file in the other disks of the hard disk, after starting it with ghost in the original system, import it directly, if the system is broken, remove the hard disk, first copy the system in another machine, remove the hard disk of that machine, and then use ghost to reinstall the gho file in that machine, after completing 100%, remove this hard disk, reinstall it back into the original machine, and then restart the computer.
-
I have Shenzhou Q130B,There is an "F11 Boot Menu" at the bottom of the screen when you boot up, that is, the boot menu,Yours should also have it,Press the F11 key when the logo screen,Then select your USB flash drive,Enter,Try itγ
-
You can try to see if the U disk can be recognized on other computers, if it is not a problem with the U disk, then you can consider whether it is a PE system problem. Check whether the PE system itself is damaged, and use a PE maker to check the "simulated start-up".
Click on the simulation to start and smoothly enter the PE page of the U disk installation master, which can indicate that there is no problem with the PE system. If you can't enter the U disk installation master PE system, you can click one click to make a U disk boot disk, remake the disk PE system, and set the default.
-
The computer can't be turned on U disk installation system tutorial**? In the process of using the computer, we often encounter the phenomenon of not being able to enter the system normally due to illegal shutdown, virus, system file corruption and other failures. Below we share the specific steps of how to install the system through a USB flash drive when the system crashes.
-
The computer won't boot up caused by a USB flash drive.
-
To share popular science with all old fans, computer knowledge, installation essentials, all kinds of computer problem solving, the following is to talk about, after the laptop is installed with a new hard disk, the computer can not enter the system, this situation is simple to solve, friends who feel interested can take a look.
-
Use PQ or other partition software to enter to see if the C drive is the main active disk, you can right-click the C drive in the partition tool and set it as the main active disk in the advanced version, and then the application can be restarted. If my answer is it.
-
Under normal circumstances, after the U disk is installed on the system, it will be booted from the hard disk by default, if it cannot be booted from the hard disk, there are several reasons for the analysis:
1. If the active partition is not activated, you can enter PE and use the partition tool (DiskGenius) to activate the main partition.
2. Enter the BIOS to set the hard disk to boot, the current notebooks are different, you can follow your own notebook settings, as the first boot option, and disable other boot methods.
3. Lost the boot file.
-
Did you install the system in the U disk?,Plug it in and start it to see.,What is the U disk file?,It's estimated that it's installed in the wrong place.,Reinstall it.γ
-
Set the C drive as the active partition, you can boot it with the C disk without the U disk, the partition management in the PE can be set, and the partition tool integrated in the GHOST disk can also be set.
-
This is because you didn't set the C drive to "function". With the Partition Magician software, select the C drive and set it to"role"Can.
-
Reinstall the system if it doesn't boot. Then enter the PE, enter the DiskGen software, click the C disk with the mouse, press F7, and then press F8.
Reason: The C drive is not activated, so the system cannot boot.
If you have any questions, please feel free to ask.
Addendum: Is the hard disk not bootable???
The boot of that hard drive was corrupted, and the computer could not read the boot.
-
That is, there is a plug-in USB flash drive that can be accessed from the USB flash drive, otherwise it will not be able to start.
There must be a problem with the BIOS settings, and I don't know what is going on with your machine, so I can't be sure what kind of setup is the problem.
Chinese cabbage does not know to modify you.
PE made with mobile phone memory card can go in, it shouldn't be BIOS settings or hardware problems, try to remake a PE disk in another way.
How to make a USB flash drive boot disk.
How to set up USB flash drive boot on ASUS motherboard.
Solve the problem that the C disk cannot be found when the system is installed on the U disk, and the C disk needs to be formatted through PE. >>>More
If you don't use a USB flash drive system.
Directly after formatting. >>>More