Kneel and beg the computer master to come in and take a look, and ask the computer god to come

Learn design and start your own small company.

To learn how to do business, first find a part-time job in a computer city. Be your own boss after having experience. This is the most ideal.

If you enter a professional computer training institution, you can learn different knowledge according to different majors.

Let's go straight to the relevant school! You are looking for too much fiction on the Internet, it's not good, it's better to find a regular school to study!

Find a master to be his apprentice If you are interested, you can find me

If it's a maintenance or sales suggestion, think about something else.

If you have the talent to learn programming or network security, you can find a good job in a large company or become an enterprise network administrator after graduation. The treatment is ok!

Nowadays, the competition for making computers is too fierce, and the profits are terrible. Unless the capital is thick to make channels, **, wholesale and the like can make money. Open a repair shop to support your family. I can't make a fortune.

I'm going to be verbose when I see so many points. I myself am learning the network, for the so-called IT have to say two words, now the network hardware is basically full of see, I feel that I am also deeply affected, should be a few years ago when there were technical schools everywhere, vocational schools at every turn to say what IT talents, at that time many people to learn IT is actually to learn Microsoft Office components, or to engage in a few computers to disassemble and assemble to say that they are IT talents, now the market is sluggish, plus people in the past few years have been crowded to the present, And the demand for network maintenance is very small, for example, if a company recruits network maintainers at most 4, and if the recruitment of mechanical and electrical or what is the professional is more, so the network is more than the monk, if you want to say that IT this industry is vibrant and profitable, I suggest you go to learn more computer **, this basic salary is 2000, it is easy to go to 3000. I can say with certainty that if you want to just learn network maintenance or hardware, then you will definitely regret it, about a lot of people to engage in **, I am not optimistic about myself, the development space is small, not to mention eating a bowl of youth, if you are very confident in your own programming, you can also consider using programming knowledge to learn abrasives, programming is not as good as you think, are boiled out of youth, and it is not good to boil it up.

Nowadays, most young people are full of curiosity about the Internet, which is nothing more than that they like to play computer games or QQ, so they want to do this. Interest can't be eaten as a meal, or be practical. Don't wade into troubled waters.

It may be okay to do hardware sales. Software requires talent.

Learn the hardware first, assemble the machine to understand the performance, and then learn the system knowledge, programming, software, etc. You can apply for a computer school.

The system can be cleared, or reinstalled to resolve.

2) Set the CD to boot: After booting, when the motherboard self-test screen or brand logo screen appears, quickly and continuously press the BIOS hotkey (different brands and models of computers have different BIOS hotkeys, notebooks are generally F2 keys, desktops are generally DEL keys) to enter the BIOS setting interface. Press the left and right arrow keys to move and press enter to enter the boot (or startups) tab, select the boot option by pressing the up and down arrow keys, and press the + or - keys to move the boot option to set the optical drive (cd-rom or ***-rom) as the first boot item (the old motherboard needs to enter the advanced BIOS features tab, press enter at "1st boot device", and then select cd ***-rom), Press F10 again to save and exit the reboot.

Some new motherboards support pressing F12 or F11 to enter the boot options menu after booting, and you can directly select the optical drive without entering the CMOS interface. Insert the system disc into the optical drive in time when you restart the computer. After the system is reinstalled, pay attention to setting the hard disk as the first or second boot item.

3) Clear password: After the disc is successfully started, the function menu will be displayed, at this time, select "Clear Windows Login Password" in the menu, press enter to confirm and follow the prompts, and you can log in without password after restarting.

4) Clone and install the system: After the disc is successfully started, the function menu will be displayed, at this time, select "Install the system to the first partition of the hard disk" in the menu, press enter to confirm and follow the prompts, or after entering the PE system, run the "one-click installation system" on the desktop, the computer will automatically run the ghost software to automatically load the GHO file clone and install it to the C area, the whole process basically does not require manual intervention, until the last entry into the system desktop.

1. Restart your computer, press and hold "F8" on the keyboard to select a function like Safe Mode to enter the system. If you can get in, restart the computer again, don't press "f8" again, it's generally no problem, and it can be used normally. If it doesn't work out, see 2

2. Rebuild your partition table. This process is not something that can be explained in one or two sentences. If it doesn't work yet, look at 3

3. Reinstall your system, only install the "c" area, do not touch other disks, in order to protect your own data. If you also have data to keep in the C drive, (assuming you can find the best with the PE method, you can save the data you need, if you can't find it, it's normal, because I see too many things that can't find the file).

4. After reloading, it is basically impossible to have problems. You can use the computer normally.

5. If none of the above reasons are true, then there may be something wrong with your hard drive.

6. If none of the above reasons are true, then it may be that you have a problem with the memory module.

7. If none of the above reasons are true, then it may be that there is something wrong with your hard drive data cable.

8. If none of the above reasons are true, then there may be something wrong with your motherboard.

9. If none of the above reasons are true, it is impossible. Therefore, basically confirm that to this step, not to mention the computer, it is the brain, and you can also judge that the problem is **.

10. The most important point is to remember to give us the reward, you see that we said it so clearly, you have to be honest.

Press and hold the power switch to force the shutdown, then turn on the power and press F2 or F8 (depending on the brand) to see if you can enter the BIOS to see if each hardware exists. If so, reboot and check if an external device is connected? If there is none, unplug the battery and power supply, press and hold the power button for 10 seconds, 2-3 times, and then connect other subsequent devices, and then turn on the machine to see if the brand screen has been turned on, there is a picture or can not enter, try to reinstall the system, if there is no boot screen, it means that there is a problem with the motherboard.

If you can't enter safe mode, the system is damaged, restore the system backup or redo the system.

It should be the system file is lost.,There's no way to find the file to load during the boot process.,The white bar should flash.,In this case, if you have a disc, press R in the disc startup to enter the console to repair it.,Or you can only reinstall the system.,Use the external system [PE,U disk version,Disc version is OK] If you install it,You can also back up the previous data by the way,No risk,Good luck。

The black screen after three seconds of booting up should be in the self-test process, and it has not yet started the operating system. You can only connect the motherboard, memory, and power supply to boot the test, and unplug the rest, if the self-test fails, the motherboard is more suspicious.

Redo the system, this is the reason why you can't find the hard disk or don't have the system!

As follows:

1. Your laptop has turned on the pxe boot of the network, and the hard disk has not been caught at present.

2. You can boot the computer into the BIOS to see if there is any hard disk information, and in addition, turn off the PXE boot of the network in the advanced options.

3. If there is hard disk information and cannot enter the hard disk system, it means that your system files are damaged or lost.

1) You can try to use the good U disk PE tool to enter the system, boot with DiskGen software, unplug the U disk after restarting, and then try to start the system or not.

2) If there is no result after repairing, it is recommended that you copy the useful documents of the original C drive to the D E drive in the PE state, and then reinstall it.

4. If the hard disk can't be caught, it may be the interface, circuit, or it has been damaged.

Note: The red box is the network startup, because the personal computer does not have a diskless system, so the boot failed; The blue box is looking for hard disk boot failures.

1. Start the computer and press the shortcut key to enter the BIOS, select Advance, then select Integrated Peripherals below and click Enter, as shown in the figure

3. Complete the above settings and press F10 to save the settings.

Turn off the cat first, and then re-enter your IP address and password from Kai. Let's see if we can connect