How to set the router to automatically disconnect the Internet when the router cancels automatic Int

You have restored the factory settings of the router, of course, you can't access the Internet, because the information in the router is also erased when you restore it. If you use win's built-in dial-up or Internet starry sky to surf the Internet, you can't connect to the router, directly to the cat.

The correct way to do this is to reset the dialing information in the router. There is a setup wizard in the router, you can reset it step by step, and select PPPoe as the connection method. Crypto broadband providers have provided you with.

After setting, in the WAN option, set the connection mode to manual. In the future, every time you need to surf the Internet, log in to this address, and choose to connect to the Internet (the expression may be different in different routers, so it means to connect) and you can access the Internet. Select Disconnect when you go offline.

Or simply turn off the power of the router. It's a bit of a hassle, but you can strictly control the amount of time you spend online.

Another, simpler way. Select the default auto-connection method. Turn off the power of the router directly when you are off the network... Anyway, you're asking for a control of the Internet time within 8 hours...

After restoring the factory settings, you can use one to dial the Internet directly, but the other can not be unplugged again, you do not set up automatic Internet access and the two cannot be used at the same time, unless you install a ** server on one.

You can set up a router to connect on demand, take TPLink WR886N as an example, and perform the following steps:

1. Open the browser, enter, enter;

2. Enter the router password and click OK. (Default is empty) 3. Click Network Settings - WAN Port Settings, click Connect on demand, set the idle disconnection time, and click Save.

I don't know which brand of router you use,Generally, the current router's WAN settings have a timed network disconnection,You can set the time to allow Internet access,If not,See if there is a new firmware,Update it,Maybe it will help you,For example, the old style of tplink has to update the firmware to have this function。

Ordinary routers do not have this kind of function.

This is a function of the firewall.

The router at my home seems to be about 2 hours away from the network without using the computer. It is also a general TP-Link wireless router.

Unplug the network cable that connects the cat to the router, and then enter the route settings page.

Sometimes you can't get on the network, not necessarily the routing problem, it may be a broadband problem, this problem is useless for you to toss the routing, you have to call the network ** business ** repair.

It depends on what router. Some routers can restrict access to the Internet at different times. If I'm not mistaken, Mercury's router seems to do.

When you buy it, ask the boss or look it up online. As long as there are words such as schedule or schedule in the router, it should be possible.

If you set up these IP addresses, you won't be able to go online, because these are private addresses, and these IPs are used to establish a local area network, which are intranet addresses, and your external network addresses are not these at all, you can verify by running cmd -ipconfig Your addresses ensure that you can't access the Internet, so you still have to get them automatically.

You can use the router to set a scheduled network disconnection by performing the following steps (in this example, TP-Link is used as an example):

1. Log in to the router (the default address of the general router is, the username and password are admin, and the specific data can refer to the back of the router or the manual), find the [Network Parameters] option on the left side, select [WAN Port Settings], select [Scheduled Connection, Automatically Connect in the specified time period], set the time, and click [Save];

2. After the setting is completed, click the [System Tools] option, select [Restart Router], click [Restart Router], and the setting will take effect.

Note: After the setting is complete, the network can only be accessed during the specified time period, and the network will be automatically disconnected if the network is disconnected at a time other than the specified time.

1.Set it to "time to connect", and then you don't need to turn on the wifi on the phone, and don't turn on the computer when you don't use it.

2.This setting can be done, that is, if there is no device connected to wifi, it will be disconnected in 15 minutes, and if there is a device connected, dial again.

The solution to frequent broadband drops is as follows:

1. If you use a router, disconnect the router for stand-alone dial-up test;

2. If you have a modem device, please pay attention to whether the device is overheated, it is recommended to turn it off for a few minutes before restarting it;

3. If the connection is dropped when running the program alone (such as when playing a game), it is recommended to restart the computer or reinstall the program;

4. Check whether there is a disconnection caused by a computer virus, and it is recommended to scan the whole disk;

5. If there is a server to choose from the running program, please select China Unicom.

The solution is as follows:

Cause 1: The network line is faulty.

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Cause 2: If the network cable is faulty, it is recommended to replace the finished network cable.

Cause 3: The router has an incorrect Internet setting and you need to reconfigure the router.

Solution: Reset the router and set dialing again.

Reset Router Method:

Method 1: There is a button [RESET] button on the back of the router, press and hold for 5 seconds, and the indicator light on the router panel will be off and then on, which means that the settings have been reset.

Set up router dialing:

The IP and DNS settings of the computer are automatically obtained.

1. Open the browser - enter the general router address is this or view the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

2. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter your Internet username and password according to the prompts, and save.

3. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

4. If you want to use wireless wifi, your router must have a wireless routing function, in the settings, turn on the wireless routing function, here, the wireless signal signal is changed to one of them. The strongest anti-interference.

You can also set a password for your Wi-Fi connection.

There's no need to break it, it's all monthly now.

Or set it up in the router, how long will it be disconnected if there is no data, it seems to be called to connect as needed.

???Are you saying your router is downstairs and your computer is upstairs? Is there a wired or wireless route? It's a limited amount of good talk, measure the distance, buy a network cable, make two crystal heads, make a thing on the wall, connect it directly, and then adjust the LAN. ok

There is a setting in the settings for how long it will be disconnected if you don't access the network, look for it.

[Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set up router dialing:

1. In [Network Parameters] --WAN Settings], uncheck [Auto Connection], save, and exit.

If you have a computer at home, you can directly remove the router, and the network cable to your home is directly connected to the computer, and the computer dials up to access the Internet, which is the best solution; There is also the LAN port of the router connected to the network cable to your home (do not connect to the WAN port), and your computer is connected to the other LAN port of the router. Either method is acceptable.

The best way to do this is to plug the ADSL cable directly into the computer you need to connect to! This way there will be no hardware detection! Instead, you can access the Internet as long as you dial up.

Enter "Enter the router settings page, enter the account number and password (the tp-link password and account are "admin" by default), and the network settings have the connection methods "automatic connection", "manual connection" and "on-demand connection", and select them according to your needs.

The attributes of the wireless network card can be deleted.,Find it yourself.,I forgot about it.。

Here's how to solve it.

1.If the router Wi-Fi signal cannot be transmitted, it is recommended to go to the router interface and reset the Wi-Fi switch of the router.

2.If the router dial-up is unsuccessful, we recommend that you go to the router and reset the route-related parameters.

3.Disconnection caused by cats. It is recommended that, according to the actual situation, replace the cat.

4.Due to the router itself, it is recommended to upgrade the router firmware, and if the network is still disconnected, replace the router according to your personal situation.

1. It may be that the timed connection function of the router is enabled, and the solution: log in to the router with the computer browser that connects to the router (the address, user name, and password are generally marked on the back of the router, generally, and then enter the "wireless settings" - "WLAN port settings" in turn, see if the "scheduled connection" is selected, and cancel it.

2. After the modification is completed, it is recommended to enter the router control page to restart the router.

This is a problem with the router! I know that the router won't turn off except when the power is off! I haven't seen what it means to turn off with power on!

If auto-shutdown is an automatic restart of the router! Then it is recommended to go to the seller for an exchange! This is a hardware issue!

There is no way to solve it in a software way.

The situation of various types of ** is different, such as the implementation of 4G** monthly traffic and traffic fee double cap, as follows:

1.After the traffic billing of 4G** and other than the superimposed traffic package reaches 600 yuan in the current month, the domestic traffic (excluding Taiwan, Hong Kong and Macao) will no longer be charged, until the system will automatically close the data network after 15GB, and automatically open it in the next month (at this time, you can take the initiative to apply to open the dust data network, and continue to traffic according to the ** foreign investment fee standard after opening);

2.When the total data traffic of the month (including various charged, free, directional and other traffic of the ** internal and external brothers' banquet, including international and Taiwan, Hong Kong and Macao roaming traffic) reaches 40GB, the system will automatically shut down the data network, and it will no longer be open in the current month.