My house has just finished painting the wall of Golden Bauhinia with latex paint, and it can live in

1.In order to ensure the air quality at check-in, please ventilate the walls for at least one week after the wall paint is painted before moving in.

2.Normally, after the completion of the last process of wall paint, it can be dried into a film in about 2 days, which means that the wall paint will stop volatile organic compounds after 2 days, and when the ventilation situation is good, it can be moved in after 3 days.

3.The safety of indoor air quality does not depend entirely on the factors of wall paint, mainly in the composite board used in the decoration process, as well as composite flooring and various glues, as well as wood paint, etc.

Interior wall latex paint: It is a kind of water-based paint prepared by adding pigments, fillers and various additives with polymer emulsion as the film-forming material and synthetic resin emulsion as the base material. Interior wall latex paint is one of the main decoration materials for indoor walls and ceilings, which is characterized by good decorative effect, convenient construction, small environmental pollution, low cost and extremely wide application.

The pungent smell is not environmentally friendly, you should choose the top ten brands of paint It is best to open the window for a month, and you can put some fruits (if they are going to be broken) at home and don't waste it.

Fully ventilated, occupancy is available for approximately 20-25 days.

The pungent smell is not right, and the best way is to detect it.

Yes. Latex paint generally contains more formaldehyde, benzene and heavy metals, and the decoration is completed for 3 to 6 months.

Suggestion: Suggestion:

First, open the window for ventilation after decoration If you have the conditions to open the ceiling fan, the formaldehyde density is heavier than other components in the air, and the effect of only opening the window is not good.

Fourth: choose zero formaldehyde bean platinum wood board for decoration.

Fifth: the paint selection is not good to listen to, the tasteless is not necessarily good, some heavy metals exceed the standard, and the windows must be opened.

The latex paint is already blended, so there is no need to mix it with water.

Paint cannot be mixed with water. Use thinner only.

It is very wrong to brush latex paint or batch putty on top of the original latex paint.

The adhesion between latex paint and putty is not strong, and the adhesion is even worse after several years of oxidation and weathering. If you batch putty on it at this time, it is obvious that the new batch of putty will absorb the original latex paint and fall off with the original putty, and the new latex paint is the same reason, so to renovate the latex paint, you must remove the latex paint that was previously brushed, and then check whether the putty on the original wall should be removed. It turns out that whether the putty on the wall should be removed is not determined by when it is done, nor by the number of decorations, but according to whether the putty and the wall are adhesion, cracking, and hollowing.

The correct way is: first find a piece of wall at random, try to shovel the putty with a shovel (a batch knife used by painters), and determine whether the putty has good adhesion to the wall, whether there is hollowing, whether there is cracking, etc. If there is good adhesion, there is no need to eradicate, only small cracks can be patched with plaster; If there is a small area of hollow drum, just remove the hollow drum area and re-apply putty.

If there is a large area of hollowing, or a relatively wide crack, or the putty is pulverized, it must be eradicated. When the putty problem is solved, you can brush latex paint.

The construction plan of wall painting is not the same, and it is necessary to formulate a suitable construction plan according to the actual wall condition and effect requirements.

Dulux Easy Paint Renewal Service shares professional wall painting steps:

Wall assessment: It is not uncommon for a wall to have problems within a period of time after construction has been completed. In addition to the lack of professionalism of the construction team, a large part of the reason is that the wall assessment is not done well.

In order to maintain a good wall effect for a long time, it is necessary to fully understand the condition of the wall and evaluate the wall before construction. The content of the wall assessment includes the area, humidity and the condition of the bottom layer of the wall. In addition, external factors should also be taken into account, such as whether there is a water leak in the surrounding neighbor's house, whether there is a subway line in the vicinity, etc.

According to the condition or demand of the wall after evaluation, the construction plan is formulated, the appropriate coating products are selected, the amount of paint is calculated, and the wall color is selected.

Relocation protection: After the plan is formulated, you can't start painting directly, and it is more troublesome to move and protect the items in your home before construction than painting the wall. First of all, it is necessary to clean up the small objects in the home, such as decorations, clothes, etc., and move the furniture and appliances against the wall to facilitate the construction.

At the same time, because it is inevitable that the paint will splash off during the painting process, it is necessary to use professional protective materials to cover the floor, furniture, etc.

1) Old houses with relatively intact walls (local walls have stains, bumps, and cracks): The problems of local walls should be repaired first, and after the walls are smoothed, the primer should be painted once and the topcoat twice;

2) Old houses with serious wall problems (wall peeling, peeling, mildew, etc.): all the problem walls need to be eradicated, the base layer is painted and repaired, and then the putty is scraped twice and then polished and smoothed, and finally the primer is painted once and the topcoat is applied twice;

3) Newly renovated house (when the wall is in good condition): after directly polishing the wall, apply the primer once and the topcoat twice;

4) Blank room: scrape the putty twice, polish and smooth the wall, apply the primer once and the topcoat twice.

Cleaning and homing: After painting, the final cleaning and homing work is required. Wait until the last topcoat is dry, remove the protective material, clean up the construction waste, and reset the item.

The renovation of the home is complete. The construction time will be affected by factors such as the type of construction and the weather. Generally, it takes about 2-3 days for the new house to be painted or the wall is in good condition, and it takes 7-10 days to complete the old house with more serious problems.

The wall painting project not only requires the labor of the painting process, but also the painstaking organization and removal of furniture, cleaning and returning to its place, etc.

If the original paint is not used for a long time, the overall effect of the wall can be considered.

Continued use: the use of time is not too long or within the year, that is, the overall wall has no cracks, no stains, no peeling and slight overall yellowing and aging, etc., more economical method: you can consider continuing to use it for a period of time.

Simple new: depending on the adhesion between the original wall latex paint and the wall, that is, if its adhesion is good, a simple surface can be renewed (many well-known brands on the market have a new business of wall latex paint a day, and you can also do it yourself), the important thing is that the wall must be sanded with more than 300 mesh sandpaper before the new is made, so as to increase the adhesion of the new paint and the old paint (no peeling, cracking) and durable, otherwise it will be counterproductive.

New construction: remove the original yellowed old paint surface and repaint, that is, putty, grinding and painting after shoveling. In this way, the overall quality and effect are better, but not economical.

To sum up, the specific choice of which way to make a new is based on the use of the individual and the house, such as temporary residence, rental and lending, for marriage housing, etc., to make the most suitable choice for yourself.

If there is mold and peeling on the wall, it should be removed first, and the putty can be scraped after rolling through the glue. Most of the old walls will be yellowed when renovated, and if they are yellow, they will have to be painted with latex paint once

There will be a phenomenon of falling off. It is necessary to clean up all the contents of the original wall, and then brush the interface agent. 3. Latex paint on the bottom and 2 sides is OK.

The effect of sea-based cloth is very good, and it can also be brushed with latex paint after use, and it is also convenient to change the color. It's no problem to use it for decades. I did an experiment in a hotel, changed the color in February, and did it for many years, and the grassroots layer was not affected in any way, and the effect is still the same.

It is necessary to use putty to shovel out some old coating and soft putty layer, and scrape the putty again according to the process. 2 There are no other problems in most other positions, polish one side evenly with sandpaper, and press 1 for some soft places. 3. Brush latex paint according to the process.

It can be brushed, and if the wall is dirty, it is recommended to polish it first.

1. Paint and decorate the newly brushed paper mortar wall, and wait until the outer layer of lime is completely dry, otherwise it will cause spots on the wall and affect the beautification effect.

2. When refreshing the color on the dark old lime wall, including the wall with more spots, you should first brush it with white ash water, and then set the refreshing color after drying and whitening.

3. If the lime wall has not been painted for more than half a year, add acidic color drywall powder, if green, sky blue and other colors, it is easy to produce neutralization and overcoloring, so you need to pay attention.

4. In the process of brushing lime slurry, the lime slurry should be constantly stirred, otherwise, the lime slurry will precipitate, and there will be stripes of different shades on the wall after brushing.

5. When painting, you should master the principle of top-down, one-stroke, vertical brush, and horizontal brushing from left to right, but you should pay attention to it, and do not miss the pen.

The first step in wanting to repaint a wall that has been painted with latex paint is that the first step must be to clean the wall. The second step needs to be sanded, and some fine sandpaper needs to be used when sanding, do not damage the wall, and clean up after sanding. The third step is to prepare the latex paint, and then whitewash, after the putty dries, it must be sanded and smoothed, and then painted with a primer, so that it is OK.

According to your situation.

You only need to hit the sandpaper several times, and then repair the putty on the broken place, and then polish the repaired place to remove the dust, and you can paint it.

If the original color is darker, please brush the white latex paint and then paint the color to be modified, so that the paint is saved.

No primer is required.

Old latex paint needs to be removed. The old wall must be treated with a wall base before brushing latex paint, and all the serious chalking should be removed, and then the putty powder must be re-brushed, and then the latex paint must be brushed.

If you re-paint latex paint, the quality of the wall is not good, it will affect the later decoration effect and service life, and will also have an impact on the overall environment of the home. Whether it is wall paint, wall tiles or wallpaper, if you want to renovate better, you should reprocess the base part of the wall.

Due to the aging of the material, the water-resistant putty of more than five years must be removed to the bottom of the wall during the second decoration, otherwise it will affect the construction quality of the wall latex paint in the future and the long-term use effect after decoration.

Shovel the drum place, scrape putty and level, don't worry about the flat place, and then brush the colored latex paint. Of course, it's best to brush the closed primer once!

You can apply another layer of putty on top of it, and then spray paint, and the primer is not needed, and the original layer is quite primer.

Is there a phenomenon of alkali return on the wall? If not, sand the wall, then clean up the floating ash and paint it directly!!

You can ask Dulux Home Easy Paint, they are professional in solving wall problems, 400-720-7717

Yes, as long as you keep the ventilation for about a month after applying latex paint, you can move in.

Latex paint is one of the important materials for home decoration now, and it is a water-based paint. Since some chemicals used in latex paint are toxic, it is necessary to ventilate after brushing to remove harmful substances. However, it does not mean that latex paint is very toxic to people, or that people will be poisoned after touching or smelling it.

On the contrary, the environmental performance of latex paint has been within the national environmental protection standards, as long as the ventilation is maintained for about a month after the decoration is completed, it will basically not cause harm to the human body.

Now the so-called environmentally friendly odorless latex paint, just say that it is slightly better than the general paint, but it does not mean that it is completely non-toxic, and there is no complete thing in this world, so it is better to let it be vacant and ventilated for a period of time.

If you want to move in early, you can put some activated carbon in each room, or put some air-purifying plants, such as pineapples, cacti, etc. Try to do less artificial deodorization and the like (some companies specialize in deodorization), even if it is odorless, the wall will still emit some toxic substances for a certain period of time, so be cautious.

Latex paint decorated rooms should not be moved in immediately, and should be ventilated as much as possible to disperse odors, generally lasting one to two weeks. However, we originally used diatom mud to paint, after the wall dried, you can move in immediately, because the diatom mud is added with diatom materials, so not only zero formaldehyde, but also can absorb formaldehyde, Yunquan's Tmall *** has.

It is best to open the windows and doors for more than a month.

As long as the chemical products contain more or less harmful substances, the selection of latex paint and glue should first smell whether there is a pungent smell, if the selected products do not have a pungent smell, and are produced by regular manufacturers with environmental protection marks, its harmful substances generally will not exceed the standard, and will not cause harm to the health of the occupants. For this kind of latex paint and glue, generally speaking, after painting on the wall, after a period of window ventilation, dry can be inhabited. If you are not at ease, consumers can ask a qualified testing agency to conduct indoor environmental testing after the renovation, and then move in after the test results meet the national indoor air quality standards.

Judging from the situation of decoration monitoring, it is relatively rare for harmful substances to exceed the standard due to brushing latex paint.

When the ventilation situation is better, you can move in after 3 days, and after the wall paint is constructed, it can be dried into a film in about 2 days, which means that the wall paint will stop volatile organic compounds after 2 days. However, if you have children, it is best to ventilate for a month before moving in. You can try Yunquan water-based wall paint, which is very environmentally friendly, not only zero formaldehyde, but also can absorb formaldehyde, and you can find their store on Tmall.