How does ADSL provide access to the Internet for two devices at the same time through a router?

The correct connection of the router is ** line - adsl cat - router - each extension.

Among them, the output line of ADSL needs to enter the uplink or WAN port into the router, anyway, it is not into the 1,2,3,4 port, the digital port is used to connect to the computer.

The IP address of the router is generally, access this address on your computer can enter the routing setting interface, the password is different according to the different router models, and it is generally available in the manual, and then refer to the manual to enter the quick setting interface, and fill in your adsl and password as required to share the Internet.

There is a splitter that splits the wire into two outlets, one connected and one connected to the router. Does the router have a manual? Refer to the settings above.

If there is no manual,Enter it in the IE address bar,You need a password when you enter,The username and password are admin,Go in and set it! No, you can message me again.

Please, when you express your opinions, do you say something that can make the person who asks the problem understand thoroughly or the actual steps that can solve the problem? It's better not to say it, I'll tell you: I can't tell you clearly:

It's no problem to follow the instructions, what a simple thing, don't waste time here.

The first choice is to set up the password and IP address of the sub-router on the computer, just like setting the main router, and then connect to the main router, you can set the independent password of the sub-router, 1, open the browser, enter in the address bar, and press Enter.

2 At this time, a dialog box will come out to enter the username and password, enter the username and password, select Save Password in the box below, and then click Confirm.

3 After these two items are completed, the computer will show that the connection is successful, and the connection icon in the lower right corner will also show that the connection is successful.

In the future, you need to add other computers, you only need to connect the computer with the router port, so that it is easy to use the network at the same time for several machines.

Re-login Change the LAN IP of route B to [ to avoid conflict with [ of route A;

4. Disable the DHCP function of route B (remove the enabled checkbox);

5. Log in to Route A again, set the WDS mode, scan the signal of Route B, and select the same as Route B: Channel (choose fixed), security mode, encryption rules, password --OK] The router will restart;

For one broadband, two routers are required to attack the mountain.

It can only be used in this way.

Broadband modem--Router 1--Router Draft 2, which means that the two routers are connected in series and set up for Internet use.

The first router is connected to the cat, set up broadband dial-up Internet access, the second router is connected to the bottom of the first router, and the second router is set up to dynamically IP Internet access in the lap.

First, choose a primary router, set it up according to the way you access the Internet, and access the Internet normally. However, after the chain server is broken, change the LAN port of this route to, save it, and restart the route once.

The other route only needs to be set to encryption. Then connect a network cable from the LAN port of the main road to the WAN port of this route, plug in the network cable and you can access the Internet.

Method 1: Use wireless router B as a switch Step 1: Connect the WAN port of A to the ADSL cat LAN port, set it normally (PPPoE dial-up Internet access can be set), and the default gateway of A does not need to be changed, and the DHCP service is turned on; Step 2: Connect the LAN port of B to the computer network card, log in to the configuration page of B, enter the browser and set the LAN port to be in the same network segment as A, and the subnet mask is. Step 3:

Turn off the DHCP service for B. Step 4: Connect the LAN port of A to any LAN port of B network cable, so that A and B can share the Internet, and B realizes the function of the switch.

Method 2, use Wireless Router B as a series router Step 1: Same as Step 1 of Method 1; Step 2: Turn on the DHCP service, and the default wireless function is turned on. Collapse Fierce Step 3:

Connect the LAN port of B to the computer network card, log in to the configuration page of B, type in the browser and set the LAN port as an important reminder, please change the start and end addresses of the address pool of DHCP before changing the gateway address, and the subnet mask is not in the same network segment as A. Step 4: In order to surf the Internet safely, please set a wireless Internet password. Step 5: Connect the LAN port of A to the WAN port of B with a network cable, and select the WAN port setting in the configuration page of B to dynamically obtain, so far, the series configuration is over, both routers can share the Internet, and B can also access the Internet normally.