The wrought iron door is elegant and beautiful, how to decorate the wrought iron door?

The wrought iron gate has a long history, and the shape is simple and elegant, and it is very artistic. Different decorative environments should choose the corresponding wrought iron shapes to meet the needs of the environment and atmosphere.

First of all, we have to talk about the first problem of the wrought iron gate, the original wrought iron gate was popular with Europe, the design is to integrate the simple, elegant, rough art style into the wrought iron gate, received the love of many people, so it has been handed down to this day, this is one of the most important assets of our modern human beings.

The quality of the wrought iron gate, the internal flower pieces are welded by different specifications of wire rods (thin flat materials, thin square tubes), and the diameter and strength of the wire rods directly affect the quality of the wrought iron piecesIn terms of selection, we should choose high-quality finished wrought iron doors produced by regular manufacturers; This is followed by the welding of the wrought iron gate and the handicraft of the forging master for several yearsThis aspect mainly depends on the skilled technology and operation ability between the technical personnel and the good production machinery, usually the wrought iron gate is each welding or weaving point can be well connected. Products made in informal small shops and workshops are often thin and textureless, and it is often difficult to ensure quality and maintenance.

Wrought iron doors, like other goods, also have grades. The high-grade wrought iron door is made of national standard Q-23** grade steel as raw material, and is welded by carbon dioxide gas shielded welding, and the surface is made after hot-dip galvanizing; In addition to the poor raw materials, the mid-range wrought iron door is also welded with ** welding, and the surface is cold galvanized or even non-galvanized.

At present, wrought iron doors can be roughly divided into two types: cast iron and forged. The former is molded by mold, and its surface is rough; The latter is currently the main method of iron door, made of professional iron materials, which can be modeled to different degrees according to different needs, which is very beautiful.

From the point of view of design style, the wrought iron gate can be divided into ancient and typical wrought iron gate and modern wrought iron gate.

The former generally uses more complex patterns, while the latter is more conciseMainly straight line beauty; If the wrought iron gate can be divided into railing transparent wrought iron gate and solid door leaf type wrought iron gate.

The wrought iron gate is so elegant and beautiful, of course, we can't bear to damage its beauty, therefore, we must know how to maintain the wrought iron gate, in fact, the maintenance of the wrought iron gate is very simple, we only need to do regular dust removal and pay attention to moisture-proof these two points are enough.

The decoration of handmade wrought iron should be based on the yard of the houseThe structure and architectural style are chosen in different colors and styles to be commensurate with it.

Wrought iron gate is a foreign art that appeared in the 17th century, and the architectural style of wrought iron gate began to prevail at that time. It has been following the development of the European love of architectural decoration, and the European wrought iron crafts will be simple and elegant, accompanied by a rough artistic style and a beautiful history, amazing and have been passed down to this day.

The whole wrought iron door includes the door tube and door flower and hinge, the main feature of the door as a whole is the shape and material outside, the high-quality iron door gives the door the feeling of being heavy, strong and durable, and the feeling of simplicity, at the same time, its color and shape are also full of artistic atmosphere. The main structure of the iron gate is made of steel and other materials, which is formed by casting and forging processing, and the shape is beautiful and generous.

China's iron craft gate can be distinguished into cast iron or forging gate, the cast iron built with the mold is relatively rough, the wrought iron is made of special iron materials, from the perspective of personality, can be divided into ancient typical and modern type, the ancient typical usually uses no rules and regulations, the selection of materials should also be relatively thick, the color is generally selected antique color, which should be attributed to the soft type, the modern type is relatively simple, the selection of materials is also to choose some small square tubes for comparison, which mainly reflects the simplicity, There is no shortage of modern beauty either.

The wrought iron gate should be handled gently in transportation, and the place where the iron door is placed is also in the place where hard things are not often touchedOnce you've chosen a place, don't change places too often. If it is not shaken, it will cause a small deformation of the wrought iron door for a long time, affecting the service life.

In terms of selection, we should choose high-quality finished wrought iron doors produced by regular manufacturers; This is followed by the welding of the wrought iron gate and the handicraft of the forging master for several years

The first thing everyone sees is the gate, and when the courtyard wall is high, the upper part of the house can only be seen.

The wrought iron flowers, with their complex shapes, are integrated into the small garden in the courtyard and blend into the natural environment.

The wrought iron gate is not only beautiful but not afraid of the old, and can be re-welded and painted if it is broken, which can be widely used.

When decorating wrought iron doors, choose sturdy and good-looking doors, which must make people look neat and domineering.

There are various types of wrought iron gates, which can be determined according to the decoration style of the home.

Iron art is developed, but iron is easy to rust, and attention should be paid to anti-corrosion and rust.

The art of wrought iron gates has a long history of development. The development of wrought iron materials and processes has been developed over 2,000 years. As an architectural decorative art, it first appeared in the early 17th century when the Baroque architectural style was flourishing, and has been accompanied by the development of European architectural decorative arts.

The traditional handicrafts of European craftsmen, with their simple, elegant, rugged artistic style and glorious history, are breathtaking and have been passed down to this day.

The wrought iron door body is mainly composed of three parts: door flower and hinge. The door body part is mainly reflected in its appearance, shape and material. The high-quality wrought iron door gives people a heavy, rough, strong, durable, simple and solemn feeling from the appearance, and at the same time, it is full of artistic sense in color and fancy.

The intricate crochet flowers on the wrought iron door and the luxurious colors that seem to flow in the dark are the perfect combination of retro and luxury of the wrought iron door.

The choice of our door is a very important point when decorating in modern society, because it can better protect the safety of our property, and the appearance of the wrought iron door gives people a beautiful atmosphere, and the function is still anti-theft. The wrought iron gate is very popular as an architectural decoration, and today I will introduce you to the installation method of the pure letter Hu Yu wrought iron gate? How to maintain the wrought iron gate?

How to install wrought iron gates?

1. There are two types of electric locks: magnetic locks and bolt locks. The magnetic lock is relatively simple, you can install it directly, and the bolt lock will have a wiring problem, try to choose a hidden place and use a small metal pipe to lay it over. No matter what kind of lock, the door closer must be installed, otherwise it will be difficult to have an effect.

A door closer is a device that automatically closes the door.

2. The key to the installation of the electric lock is the connection between the door unit and the indoor unit. If it's a network cable connection, just plug it in. If there are several cores of different colors, as long as the connection of the door station and the indoor unit is connected to the corresponding color of the wire.

3. The electric lock has two pole wires, which can be connected to the two electric lock binding posts of the video doorbell respectively, regardless of the positive and negative poles. It is also possible to design a personalized electric lock, which can be operated by opening the door for only a few seconds (1-2 seconds) and only two wires on the lock.

How to maintain the wrought iron gate?

1. Avoid bumps in daily life. This is the first point to pay attention to after purchasing the wrought iron door, the wrought iron door should be carefully handled during the handling process, and the place where the wrought iron door is placed should be a place where hard objects are not often encountered. Once the location of the wrought iron gate has been chosen, it should not be changed frequently.

The wall surface of the installation of the wrought iron door should also be kept flat, so that the wrought iron door installation is stable and plain, if it is shaky and unstable, it will cause the wrought iron door to be slightly deformed over time, affecting the service life of the wrought iron door.

2. Pay attention to clean and dust. It is better to use cotton knitwear as a rag to wipe the surface of the wrought iron door.

3. Keep away from acids and alkalis. If the wrought iron door is accidentally stained with acid and alkali, the stain should be washed off with clean water immediately, and then wiped dry with a dry cotton cloth.

4. Keep away from the sun. The sun's exposure will have an indirect effect on the wrought iron gate, which will reduce the life of the wrought iron gate in the long run.

5. Keep away from humid environment. Wrought iron doors are better installed in ventilated places to avoid moisture.

6. Rust removal of wrought iron furniture. If the wrought iron gate is rusty, it cannot be directly sandpapered, and if the rust is small, you can use cotton yarn dipped in engine oil to apply it to the rust, and then wipe it dry with a cotton cloth.

Wrought iron gatesAs an architectural decorative art, the traditional handicraft products of European craftsmen have a simple, elegant, rough artistic style and glorious history, which is breathtaking and has been passed down to this day. Today we will take you to talk about the wrought iron gate!

Wrought Iron Gate Benefits:

1. The appearance of the wrought iron gate is beautiful: with the continuous development of society, people's appreciation level is getting higher and higher, and the artistic level of the wrought iron gate is gradually rising.

Second, the practical function of the wrought iron gate: the initial function of the wrought iron gate is anti-theft, and now the function is gradually diversified.

Wrought iron gate classification:

If we distinguish from the style, it is generally divided into ancient and modern types. Classical models generally use complex patterns, the materials used are relatively thick, and the colors are generally antique, which should belong to the soft type. The modern type is relatively simple, and the materials used will also choose some smaller square tubes, which mainly reflect simplicity, but also do not lack modern beauty.

Wrought iron, no matter what style of gate is used, they are sturdy and durable, and they are not lacking in beauty.

If we distinguish from the structure, it can be divided into two types:

First, the railing is transparent.

The main method is to use a large square tube as the frame of the gate, and then use wrought iron accessories to directly stitch and inlay in the frame. The performance of this transparent wrought iron door is more inclined to be beautiful, and the amount of material used is relatively small, which is suitable for larger doors, such as community gates, villa garden doors, etc.

2. Solid door leaf type.

The main method is to make a door frame with one tube, and then use the iron plate as the bottom to make the whole door solid, and then use iron accessories to splice and inlay on the iron plate and frame with iron accessories. The performance of this kind of solid door tends to be practical and safe, but the amount of material used is more, and it is not very outstanding in terms of aesthetics, so it is more suitable for small-sized doors, such as private courtyard doors.

In order to modify the fiber, we have some introductions to the wrought iron gate, hoping to bring you a reference for purchase.

Generally speaking, wrought iron doors should be installed with electric locks. The electric lock is a mechanical lock device controlled by a relay, and the version has formed a series of products with a variety of different structures, including electric plug lock (anode lock), cathode lock (electric lock mouth), magnetic lock, electric lock, etc. Below I will introduce to you the following how to install the wrought iron gate electric lock.

First of all, it is necessary to figure out the details of the wrought iron gate, and the electric lock has a magnetic lock and a bolt lock. The magnetic lock is the simplest, you can install it directly, the bolt lock may have wiring problems, try to choose a hidden place with a small metal pipe to lay it over. No matter what kind of lock, the door closer must be installed, otherwise it will be difficult to have an effect.

A door closer is a device that automatically closes the door.

The key to the installation of the general electric lock is the connection between the door unit and the indoor unit, if it is connected by a network cable, it is easy to operate, just plug it in. If there are several cores of different colors, just connect the binding posts of the door station and the indoor unit to the corresponding color wires.

Generally, the electric lock has two pole wires, as long as the two electric lock binding posts of the video doorbell are connected respectively, regardless of the positive and negative poles. You can also design a personalized electric lock for the wrought iron gate, the electronic control of the access control, its working power supply is 12V AC, with mains power as a common power supply, two 6V maintenance-free batteries as a backup, use the key or electric control when opening the door, do not use when closing the door (just a simple mechanical principle). It only takes a few seconds (1-2 seconds) to command the battery to supply power by opening the door, and there are only two wires on the lock.

In the production process of wrought iron gates, manufacturers have taken into account the characteristics of the outdoor environment, and strive to achieve rust-proof, wear-resistant, anti-corrosion, anti-exposure and so on in the selection of materials and coatings, so users only need to look for well-known manufacturers when purchasing wrought iron facilities. The following is an introduction to the key points of installing wrought iron gates and maintenance skills of wrought iron gates.

Installation of wrought iron gates.

1. Construction preparation: The difficult section of the wrought iron gate should have a factory certificate and test report, and its specifications, models and dimensions should meet the design requirements. Put the window code in a safe place, pad the wood, and cover it well.

It is necessary to avoid making mistakes, otherwise it will be difficult to cooperate with customers in the later stage. Play the position line of the wrought iron gate, and determine the installation elevation according to the 50cm horizontal line.

2. Construction points: the opening treatment of the wrought iron gate: the installation method of the plug after the reserved hole is used for the installation of the wrought iron installation.

The horizontal position of the wrought iron hole should be based on the 50cm line of the wall, go up, measure the elevation of the skin under the window, and straighten the elastic line. In order to ensure that the windows on each floor are connected to the upper and lower lines, the theodolite is used to hit the wall in a straight line on both sides. The gap between the plastic steel frame and the wall is 10-15mm on each side.

Wrought iron door maintenance skills.

1. Avoid bumps.

This is the first point to pay attention to after purchasing the wrought iron door, the wrought iron door should be handled carefully during the handling process; The place where the wrought iron door is placed should be a place where hard objects are not often touched; Once a local reputation has been chosen, it should not change frequently; The wall surface of the installation wrought iron door should also be kept flat, so that the wrought iron door installation is stable and flat, if it is shaky and unstable, it will cause the wrought iron door to be slightly deformed over time, affecting the service life of the wrought iron door.

2. Clean and dust.

For friends who love cleanliness, it is best to use cotton knitwear as a rag to wipe the surface of the wrought iron door. For the depressions on the wrought iron door and the dust in the relief decoration, it is best to use a fine wool brush to remove the dust.

3. Keep away from acids and alkalis.

The acid and alkali that has a corrosive effect on the wrought iron door are the ones of the wrought iron door"The number one killer"。If the wrought iron door is accidentally stained, the stain should be washed off with clean water immediately, and then wiped dry with a dry cotton cloth.

4. Isolate moisture.

Wrought iron doors should be installed in a more ventilated place, moisture will cause premature corrosion of the metal, chrome plating to produce decoating, etc., affecting the use of the door.

5. Eliminate rust.

If the wrought iron door is rusty, don't take it upon yourself to sandpaper it. If the rust is small and shallow, you can use cotton yarn dipped in engine oil to apply it to the rust, wait for a while, and wipe it with a cloth to eliminate the rust. If the rust has enlarged and become heavier, you should ask the relevant technician to repair it.