Where is it better to learn welder technology?

1: First of all, learn what you need to work; Before learning electric welding technology, I should have an idea, what company I want to enter, I need to learn electric welding or carbon dioxide gas shielded welding or argon arc welding, which positions to learn, whether it is flat welding, flat fillet welding or horizontal welding, vertical welding, vertical welding, and vertical welding. If you learn it, you can apply it in your work, and you should be targeted.

2: Practical training: welders should learn well, mainly six words "diligent study, more thinking, hard practice", with hard training as the most important, through hard training to master the skills taught by the coach, standardize the basic movements.

3: Practice should be concentrated continuously: three days of fishing and two days of drying nets is not good to learn welders, only let go of the mentality of eagerness, step by step, in order to really learn the skills, really use a lifetime.

4: To learn from a high-level teacher: what is a high level, you can go to a school with better equipment, teachers and other conditions, this kind of school is relatively strong.

5: Before welding, we should carefully study the theoretical knowledge of welding, think while welding, and constantly summarize experience, so that the technology will progress.

Learning electric welding is very simple, there are no technical requirements, but there are many technical requirements in order to learn electric welding. Learning electric welding includes learning welding techniques such as hand welding, argon arc welding and secondary welding, and what welding knowledge should be mastered to learn argon arc welding and secondary welding technology?

The weld penetration of argon arc welding is small, and the working deformation is small. The weld has a high density, and it is not easy to form defects such as slag inclusions, porosity, and undercuts. It has high requirements for non-destructive testing, and the strength, toughness and plasticity of the weld itself are good.

The tensile, bending, impact and other indicators in the mechanical properties are better than other welding methods. It can better meet the requirements of single-sided welding, double-sided forming and thin-wall welding. The disadvantage is low work efficiency and high processing cost.

And the cost varies greatly with the argon market. CO2 gas shielded welding has high efficiency and low cost, which can meet many on-site operations under general testing requirements, and is especially suitable for using manpower to catch up with the schedule. However, the shortcomings are also obvious, and the state generally restricts the use of occasions with strict quality control of welds.

There are more welder skills, and you can go to New Oriental Technical School to study. You can also find a master to take with you.

As long as there is an institution or school that offers welder training, it is fine. Welding technology is a method of using welding materials (electrodes or wires) to connect two or more pieces of base metal (workpiece to be welded) into a whole under high temperature or high pressure conditions.

Hello classmates, welders belong to a special type of work, so they must have relevant certificates when working, and take protective measures when working. If you want to work as a welder, you need to study at a formal training school and obtain a welder certificate.

Hope, thank you.

Go to a welding school or a factory with welding work.

You have to pay money to go to school, and choosing the right school can learn what you want, and the theoretical operation can be well improved, and you can grow faster (learning progress is faster).

It is also possible to learn welder skills to go to a professional training school, or to find a senior master.

Pick up technology to learn? If it is easier to learn a technician, it is better to recommend Shandong Lanxiang Technical School.

If you want to learn welder technology, you must go to a professional college, because where you pay money, you can learn faster.

I myself went to a state-run school to study, I feel okay, and then I came out to work in the society, and after a few years of experience, I recommend you to study with a teacher, but you can also get the salary, and it is quite high.

My advice is to go to a physical store and learn the technology so that you can learn the technology yourself.

People who want to learn welders should know that if you want to learn welders from scratch, you need to do a lot of practical exercises from the beginning, so you must find a school that pays attention to practical teaching, and learning welders is mainly to learn welding skills.

To learn welder technology, first of all, it is necessary to be too old, 16 to 20 years old is the best, and secondly, to have a culture, to have the spirit of hardship and hard work, more practice and more practice.

As long as you make unremitting efforts to learn your own skills everywhere, become a technical expert, and have the spirit of continuous improvement and hard work, you will be able to succeed.

Well, a welder who majored in engineering and technology, and a welder who majored in school.

Welder technology is an engineering technology, to go to the technical school or welding professional class welding professional training class, with the master to learn specifically.

To learn welding, of course, you have to go to Hebei Wantong Technical School.

In our country, welding operations need to be licensed, welders are the type of work that belongs to the access category, in the professional qualifications of skilled personnel, only five of the 81 types of work in the access category, welders are one of them, and the actual situation is that most of the industry practitioners are unlicensed operations. With the continuous standardization of technology and the relevant requirements of the industry, more and more people want to take the test.

Cheese. Home > K12

Welder learning, generally go to ** to learn better?

Chen Ziyi. Platinum Talent.

5 in total. Lu Yuanzheng.

People who want to learn welders should know that if you want to learn welders from scratch, you need to carry out a lot of practical exercises from the beginning, so you must find a school that pays attention to practical teaching, learning welders is mainly to learn welding technology, generally there are ordinary hand welding, a little more difficult carbon dioxide protection welding, a little more difficult argon arc welding, argon electric welding, and flaw detection, etc., each welding technique requires a lot of continuous practice.

Hello, it is recommended to go to a professional school to study, which is better and more comprehensive.

I think you can go to your local school that is more specialized.

The advent of the student days in the professional training center of the welder technical training center? The state of our lives is getting more and more.

Extreme PDF-OCR Toolbox is a powerful PDF tool software, which can not only quickly convert and operate PDF, but also perform OCR recognition on the scanned version of PDF documents, support OCR formula recognition, and retain the text, **, paragraph and ** style of the original document to the greatest extent. Extremely pdf-ocr too