How to play sandalwood bracelets? How to play sandalwood bracelets are getting more and more beautif

Receive a new bracelet, first play with a white cotton cloth or white gloves for a period of time, a few days to half a month, do not rush to get started, this is because the sandalwood hand beads have not yet come out of the surface of the grease, did not form a thin protective layer, if this time wet or dirty, it takes a long time to wear to slowly dissolve, affecting the appearance and smell.

Method steps.

1.Rubbing it with a soft cotton cloth for a week is also considered polishing.

2.Leave naturally for a week. Allow the beads to dry naturally. At the same time, the surface is in uniform contact with the air to form a fine and uniform oxide protective layer. Take care to avoid high temperatures and direct sunlight.

3.Start the handpan. At this time, the hands must have just been washed and have been dried, sweaty hands please do not directly plate, it is best to wear abrasive cloth gloves, dry hands and slightly sweaty hands can be directly plated, pay attention to the beads around the orifice must be plated, a day can be about 30 minutes, a week to two weeks later, you can feel the dry hand plate beads when there is a sense of stickiness, in fact, this is the beads have formed a thin layer of slurry.

4.At this time, it can be left for a period of time, and then it can be dried naturally, and the pulp can be hardened to a certain extent, generally about a week.

5.Repeat the process of 3 and 4 5 to 6 times, which is 3 months, and you will see that your beads are very lustrous, and the well-coiled beads will sometimes show strong reflections, some like glass luster.

6.Wood beads do not come into contact with larger moisture at any time, if the beads are dirty, you can wipe them with a slightly moistened cotton cloth a few times, and then put them for a period of time and then play, all areas of the beads are as far as possible, especially the orifice, the most taboo of the beads is to rush for quick success, you can only take your time to come a process by process, with the change of the beads can also get a kind of spiritual pleasure at the same time.

end precautions.

The beads are coiled with a cotton cloth, which is relatively smooth, and if you knead it with this cloth, the beads will become very transparent and very clean in the later stage. If you rub it directly with sweat on your hands, there will be a layer of oil on the surface, which contains sweat and mud, so that the beads will look smooth on the surface, but it is very dirty, and this light will be thief and black.

After 7 days of rubbing the cotton cloth, you can get started.

When you receive a new sandalwood bracelet, you should play with a white cotton cloth or glove plate for half a month, and you are not in a hurry to wear it, because the surface of the sandalwood bracelet has not yet come out of the oil, and a thin protective layer has not been formed.

Place the sandalwood bracelet naturally for a week to allow the beads to dry naturally, while the surface is evenly in contact with the air to form a fine and uniform oxidation protective layer, pay attention to avoid high temperature and direct sunlight. After playing with the bracelet with cotton cloth and gloves for a week to half a month, the surface becomes relatively smooth, and you can wear it on your hands, and there is no problem with a slight wet, but you can't wear it for bathing and swimming. In the later stage of the beads, the beads will become active and clean, and it is forbidden to touch it with hand sweat, which is easy to block the pores and appear black and dirty.

1. If it is a sandalwood bracelet that you just bought, you should first use white gloves or white cotton cloth to disturb the Dan for a period of time, and rub it through cotton cloth for about two weeks to form a protective film on the surface of the bracelet before you can start playing, otherwise the smell and beauty of the hand beads will be affected.

2. If it is an old sandalwood bracelet, polish the bracelet first, then let the beads dry naturally, and place it in a cool place for about a week to form its own oxide protective film. Then you can start to get started, but pay attention to wash and dry your hands before making the bracelet, about 30 minutes a day, insist on one to two weeks, and then place the beads in a cool place for natural drying.

3. Repeat the above process 3-4 times, and in about three months, the bracelet will become very shiny, and the good bracelet will also have a glass luster. When making a bracelet, we should try to coil every part of the bracelet, especially the orifice of the beads, and strive to do the best in each step, so that we can not only help us cultivate our self-cultivation, but also maintain the bracelet.

Sandalwood plate play method, sandalwood bracelet finish method, sandalwood bracelet finish method.

First of all, rub it with a soft cotton cloth for a week, which is considered polishing.

Step 2: Leave naturally for a week. Allow the beads to dry naturally, while the surface is evenly in contact with the air to form a fine and uniform oxide protective layer. Take care to avoid high temperatures and direct sunlight.

Step 3: Start the handboard. At this time, the hands must have just been washed and have been dried, sweaty hands please do not directly plate, the best type of brigade to wear gauze gloves, dry hands and slightly sweaty hands can be directly plated, pay attention to the orifice of each bead must be around the plate, a day can be about 30 minutes, a week to two weeks later, dry hand plate beads can feel a sense of viscosity, in fact, the beads at this time have formed a thin layer of pulp.

Step 4: At this time, it can be left for a period of time, and then it can be dried naturally, and the slurry can be hardened to a certain extent, generally about a week.

Step 5: Repeat the process of 3 and 4 about five times, that is, 3 months, you will see that the beads show a very aura luster, and the beads that are well coiled will sometimes show a strong reflection, some like glass luster.

Sandalwood bracelets are hard and have a pleasant aroma, giving people a feeling of refreshment, helping people to relieve fatigue and refresh their minds.

1. Spiritual curative effect: excellent relaxation effect, can soothe nervous tension and anxiety, and the effect of sedation is more than invigorating.

2. Physical efficacy: it can dispel anxiety. Sandalwood also has anti-spasmodic and tonifying properties on the body, bringing a feeling of relaxation.

3. Efficacy: Basically, sandalwood is a balanced essential oil, which is particularly beneficial to dry eczema and aging and dehydration, making it soft, improving itching or inflammation, and its antibacterial effect is more helpful to improve blisters and boils infected wounds.

Real sandalwood, its color is a little brownish. Even if it's new wood, there will be some smell of old ripeness. And its aroma is not something that can be smelled all at once. It's faint, if there's nothing.

It's the same as agarwood, you deliberately try to smell its aroma, but it's gone. And when you are inadvertent, the aroma suddenly wafts over, refreshing people's hearts, and the dark fragrance floats. And the fake sandalwood soaked in perfume is very strong, very stable, very fake and shallow.

Something that directly increases charm value. The scent is sultry. Much stronger than perfume!