When installing the system, a message is displayed that the memory cannot be read

Updated on number 2024-04-09
5 answers
  1. Anonymous users2024-02-07

    In response to the different questions of many netizens, after a long time of modification and supplementation, the answer [original] is basically fixed, ?Reproduction is strictly prohibited&.

    Take a look at what is wrong with your computer below, and only the right medicine can solve it.

    There are several main aspects to this problem:

    If you use a pirated system, there may be such a problem, it is recommended to use [Genuine].

    If it doesn't affect your computer or [occasionally] it doesn't happen, restarting your computer will disappear automatically.

    If it is caused by a virus, upgrade the anti-virus software to completely disinfect the computer.

    The hardware is mainly caused by incompatible memory modules, and the memory should be replaced if necessary.

    system or other software, check whether the computer year, month, and day are correct. [The ghost version of the system is prone to this problem].

    If the driver is unstable, reinstall or update the driver in time. At the same time, using Optimizer, 360, and Master Lu to clean up junk files will also cause this problem.

    You don't need to delete Windows IE, you can just use another browser. For example: 360 Secure Browser, Window of the World Browser, Maxthon, etc.

    The general solution for other software is to uninstall the software and reinstall, upgrade or replace it with another version.

    1) If there is a problem with the system itself, install the official patch in time, and [reinstall the system if necessary].

    2) If there is a problem with a certain software, here is mainly to look at the software running at boot, [use 360 and so on to check the software running on boot, and remove the software that does not need to run].

    3) Software conflicts, uninstall the problematic software. (e.g., when installing or running, upgrading, patching, replacing another version, or uninstalling the problem).

    The following methods can be tried: if it doesn't work, the only way to do it is to restore or reinstall the system

    Trial command exclusion.

    Start Run Enter cmd -- Enter, and enter the following command in the command prompt.

    for %1 in (%windir%\system32\*.dll) do s %1 enter.

    When you're done, underneath the input.

    for %i in (%windir%\system32\*.ocx) do s %i carriage return.

    If you are afraid of typing mistakes, you can copy these two commands, then right-click the mouse button after the command prompt, hit "paste", press enter, and wait patiently until the screen scrolling stops. Restart your computer

    Run regedit into the registry, under hkey local machine software, microsoft windows, currentversion, explorer, shellexecutehooks, there should only be one normal key, and delete the rest. [If there is another (default) leave it alone, it is usually empty.] 】

  2. Anonymous users2024-02-06

    Upgrade the system and kill the virus.

  3. Anonymous users2024-02-05

    It's a software problem, and many software files that are lost or corrupted have similar prompts.

    Note that the next time this happens is after running the software, this problem occurs, and then reinstall the software. In fact, when there is a problem with the computer, most of them are simple failures, so don't think about the complex.

  4. Anonymous users2024-02-04

    It's a problem with the system.,It's a virus.,It's not a problem with the memory module.,Reinstall the system and it's definitely OK.。

  5. Anonymous users2024-02-03

    Hardware: Generally speaking, the possibility of memory problems is not large, the main aspects are: memory modules are broken, memory quality problems, and there are 2 different brands of memory with different capacities, which is also more likely to be incompatible, and it is also necessary to pay attention to heat dissipation problems, especially after overclocking.

    You can use memtest

    This software will check the memory, and it can thoroughly detect the stability of the memory.

    If this problem occurs when you have dual memory, and you are mixing different brands of memory modules or buying second-hand memory, you should check whether there is a problem with the memory or it is incompatible with other hardware.

    Software: Let's talk about the principle briefly: there is a place in the memory called a buffer where the data is stored, and when the program puts the data in one of its positions, because there is not enough space, the overflow phenomenon will occur.

    For example: a bucket can only hold one pound of water, and when two pounds of water enter, it will overflow. And the system is represented on the screen.

    This problem often appears on Windows 2000 and XP systems, Windows

    The 2000 XP is very demanding on the hardware, once it encounters a resource deadlock, overflow, or similar to Windows

    98 illegal operations, in order to maintain the stability of the system, the above situation will occur. It can also be caused by poor compatibility between hardware devices.

    The memory module is broken Replace the memory module.

    Dual memory incompatibility Use the same brand of memory or only one memory.

    Memory quality issues Replace memory modules.

    Heat dissipation issues Enhance heat dissipation inside the case.

    The memory and motherboard are not plugged in properly or are not compatible with other hardware, etc.

    There is a problem with the hard drive Replace the hard drive.

    Driver issues Reinstall the driver. If you are using a new system, you need to install the motherboard driver first.

    Software corruption Reinstall the software.

    If the software has bugs, patch or use the latest version.

    Software and system incompatibility Patch the software or try the system's compatibility mode.

    There is a conflict between the software and the software If you have recently installed something new, try uninstalling it.

    Virus Problem: Antivirus.

    Antivirus software conflicts with the system or software Since the antivirus software enters the underlying monitoring system, it may conflict with some software, so try uninstalling it.

    There is a problem with the system itself Sometimes the operating system itself will also have bugs, so you should pay attention to installing the official upgrade program, like the patch of SP, it is best to put it on. If you can't reinstall the system or replace it with a different version of the system.

Related questions
3 answers2024-04-09

1. Dual memory is incompatible, memory quality problems replace memory modules. The memory and motherboard are not plugged in properly or other hardware is not compatible Reinsert the memory or change the socket . >>>More

3 answers2024-04-09

Hello! Appearance: 0x???The 0x ??? referenced by the directiveMemory. The memory cannot be"read"or"written"。 >>>More

5 answers2024-04-09

Check whether the system and driver are complete, and check the computer for viruses, clean up the Trojans, and at the same time, uninstall some conflicting software, especially some unregistered or unknown IE plug-ins, and use some software to repair and maintain IE. >>>More

2 answers2024-04-09

Happy New Year, friends, and all the best!

The reasons are summarized in the following aspects, which occasionally appear, point: cancel, you can! >>>More

3 answers2024-04-09

The system and the game are not compatible.

Change the system. >>>More