How to configure the IP of iPhone4

Updated on technology 2024-04-10
11 answers
  1. Anonymous users2024-02-07

    1.Go to the settings of your iPhone 5s and then go to the "Wi-Fi" settings.

    2.After entering the wireless LAN settings, click the i logo after the name of the wireless wifi network you are connected to, and then you can enter the IP address setting interface of the iphone5s.

    The following is the IP address, subnet mask, router address, and DNS address that the iPhone automatically obtains, etc., which should be written down first, and then used when setting up a static IP address.

    4.Switch to the "static" selection of the graphics card,This is the iPhone5S where you set a static IP address,You can change the IP address,For example, change the one that was automatically obtained before,The following can be copied from the previous one。

    Note: The IP address column here is the static IP address that can be changed, except for not being able to fill in, any number between the others can be, when it should be noted that if there are multiple users in the WFI network, remember that the static IP address of each user must be set to be different, otherwise it will cause IP address conflicts, resulting in inability to access the Internet.

  2. Anonymous users2024-02-06

    In the WiFi in the settings, enter the interface that displays the IP in the WiFi signal you are connected to, and then click on the IP address bar with your hand to pop up the keyboard and then you can change it.

  3. Anonymous users2024-02-05

    It's okay, let's talk about it, I also bought Unicom, but with a mobile card, I can't get on the Internet at all. I haven't escaped from prison yet, though. Is it that you can't get on the Internet without jailbreaking?

  4. Anonymous users2024-02-04

    The APN of cellular data can be set to CMNET, and the APN of cellular data can be set to UNINET

  5. Anonymous users2024-02-03

    Why are they all following the steps, or it doesn't work, it shows that the network connection failed, who understands, answer?

  6. Anonymous users2024-02-02

    Just restart it, or turn on airplane mode, and then turn it back.

  7. Anonymous users2024-02-01

    1. Go to Settings, and then enter the "Wireless LAN" settings.

    2. After entering the wireless LAN settings, click the i logo after the name of the wireless wifi network you are connected to, and then you can enter the IP address setting interface.

  8. Anonymous users2024-01-31

    Mobile 3G network,That's it,It's not smooth on Unicom 3G,But it's very traffic-intensive,If you don't have to turn it off as much as possible,Turn it on when you use it,If you have wifi at home,Try to use wifi to surf the Internet,The network speed will be much faster。

  9. Anonymous users2024-01-30

    Hehe, continue Xiaobai, hehe, people who are using iphone4 pass by, don't explain!

  10. Anonymous users2024-01-29

    Settings - General - Network - APN: CMNET (Mobile).

  11. Anonymous users2024-01-28

    3. If you want to manually modify the IP or DNS, click to enter the manual adjustment.

Related questions
16 answers2024-04-10

For the first use, it is best to use up the power and turn off automatically. Then rush for 12 hours, be sure to have enough. That has a longer battery life. The next charge doesn't have to be 12 hours. Hope it can help the landlord!

7 answers2024-04-10

The iPhone 4 comes in two models, one is 16G and the other is 32G. >>>More

27 answers2024-04-10

Lephone supports the most ** format of hard decoding,But the interface is very brain-dead,GPS signal is not good,WP7 is currently not as practical and easy to use as iOS,It is recommended that you enter iPhone4 if you have funds,But the signal、Computer direct connection and battery replacement are worse than AndroidG7,Others are stronger。

8 answers2024-04-10

There is no power button, you can use third-party software to enter the DFU, but if you don't even have a power button, you can upgrade the system, but if you want to jailbreak, you still have to rely on the power button.

15 answers2024-04-10

First of all,iPhone4Apple A4,The system response speed must be faster than that of the copycat machine,The best way is to use**zoom to distinguish,Genuine iPhone4When zooming in**It is very smooth,No one has the feeling of being stuck,And the copycat machine will have the feeling of a card by card。 Another one is the resolution,Pay attention to see if the battery symbol in the upper right corner is rounded,iPhone4The battery is called without edges,It's very sleek,Below the sub-resolution are fakes。 >>>More