The problem with the display of the attendance machine, what is the problem with the error of the fi

It is certain that you are not late, because you have checked in before 08:30, then, no matter how you count, you will not be late. Secondly, the attendance machine is completely in accordance with the software settings according to the kind of practice statistics.

Also, if there is a schedule, it will definitely be calculated according to the previous record, so don't worry.

If the attendance machine and attendance software are not mentally retarded, it is normal that they will be recorded twice, but the first time will definitely be recorded in the normal work card; The second time depends on the setting rules, it may not affect attendance, and it is possible that the clock-off card is recorded. If it is recorded, then there must be a problem with the attendance.

Generally speaking, all clock-in records are read into the software, and each shift is only read once, and the latest time is generally read at work, and the earliest time is read at work. So, you're definitely late. You can go to the personnel department and check it out!

In the original record, you will see all the clock-in records (including duplicate records), if the shift is scheduled, it will be calculated according to the attendance rules, and the first record will be counted and the next one will not be recorded (because the latter is a duplicate record). It is recommended not to punch in repeatedly, because the attendance machine has an attendance record capacity limit, and if the attendance record is full, the data will overflow and affect the statistical report

Remember the previous one, and the later one shouldn't be able to play.

This is recorded in the record of two card swipes, and you can explain it at that time, because you swiped it once before 30, which means that you are not late!

Hello, the following reasons: Huilian 1, it may be that there is a problem with the line of the return between the punch and attendance machine and the computer, this is the main reason 2, it may be that the communication mode of the punch and attendance machine is set incorrectly (such as IP address, com port, baud rate, etc.) 3, it may be that there is a change in the device management settings in the software, I hope my reply can help you, if you have any follow-up questions, please ask me, I will reply to your <> as soon as possible

Summary. It could be caused by the following reasons:1

The USB flash drive may have bad sectors or it is broken, it is recommended to replace a USB flash drive and try again. 2.There may be a problem with the file format exported on the punch machine, it is recommended to check whether the export format is compatible with your computer, and make sure that the time on the punch card is set correctly.

3.There may be a virus or file permission problem on the computer, it is recommended to scan the computer and modify the permission of the directory where the USB flash drive is located. You can try to replace it with a new USB flash drive first, and if there is a problem, please describe the problem situation in more detail so that you can analyze and solve the problem more accurately.

Hello, you have been waiting for a long time, this cavity is late, it often means that the files of the attendance machine are corrupted or there is an error in the system. It is recommended to restart the attendance machine and check the status of the file system, you may need to repair or reinstall the attendance machine software to resolve the issue. If the problem persists, it is recommended to contact the customer support of the attendance machine manufacturer for further technical support.

This is a fingerprint punch card machine, and then when I use a USB flash drive to export the punch card record, the file error is displayed.

Fingerprint punching is normal.

It may be caused by the following reasons:1The U disk may have bad tracks or be broken in lead mining, and it is recommended to replace a U disk and try again.

2.There may be a problem with the file format exported on the punch machine, it is recommended to check whether the export format is compatible with your computer, and make sure that the time on the punch card is set correctly. 3.

There may be a virus or file permission problem on the computer, it is recommended to scan the computer and modify the permission of the directory where the USB flash drive is located. You can try to replace it with a new USB flash drive first, and if there is a problem again, please describe the problem in more detail so that you can analyze and solve the problem more accurately.

1. First press the OK button, then enter the fingerprint, and enter the background system to upgrade the blind height.

<>3. Then enter the date of the attendance record you want to export. Once you've entered it, click OK.

4. After arguing with the ruler, select the directory to store, and it is completed.

Summary. This may be due to a problem with the attendance machine's recognition system, which causes the employee's attendance record to be incorrectly marked as clocked in. Or it could be because the employee used a different method of attendance (e.g., swiping a card or using an attendance app, etc.) and the system incorrectly marked those records as clocked in.

It's a good idea to contact your attendance manager to review specific attendance records and fix incorrect records.

This may be due to a problem with the attendance machine's hail recognition system, resulting in the employee's attendance record being incorrectly marked as clocked in. Or it could be because the employee used a different method of attendance (e.g., swiping a card or using an attendance app, etc.) and the system marked the source of these record errors as clocked in. It's a good idea to contact your attendance manager to review specific attendance records and fix incorrect records.

If there are records in the timesheet before employee No. 6 has been hired, you can ignore or delete the previous records. The specific operation method may vary depending on the attendance management software, but it can generally be achieved by selecting the relevant record, carefully infiltrating it, and then clicking the delete or ignore button. If you are unsure how to do this, please refer to the software's help documentation or contact the appropriate technical support.

In addition, it is possible to update the timesheet later after onboarding to ensure the accuracy of the records.