If you want to buy a printer, I hope you can get some advice.

Updated on technology 2024-04-16
6 answers
  1. Anonymous users2024-02-07

    According to what you said, only black and white are printed, and the print quality requirements are not high. You can buy a laser printer, laser printer you can buy a hp HP, the toner cartridge can print more than 1000 sheets, the machine is a few hundred dollars, Shanghai, there must be HP customer service, if you want to buy inkjet, print color, (if you don't want color, I don't recommend buying). You can buy an epson Epson inkjet printer.

    There is the compact all-in-one EPSON TX series which can print, copy, sweep seedlings. There are also those that can only be printed, and there is also Epson's customer service in Shanghai, (I don't know the location) Epson's original ink cartridge can print about 200 sheets. Go to an ordinary commercial factory to buy, ** is about the same, you can also go to a company that repairs computers or printers, it will be cheaper.

  2. Anonymous users2024-02-06

    I recommend an HP K209A,**699 yuan,It's an all-in-one machine。 This machine cartridge is large. Durable.

    And cheap. HP's after-sales service is good, as long as you don't have to assemble consumables, there will be basically no problems. And you don't print a lot either.

    If you buy it, you can go to Gome, Dazhong, and ask. Or on JD.com, you can buy ** on Excellence.com.

  3. Anonymous users2024-02-05

    The main factors to consider when choosing a home printer are:

    From the point of view of usage, depending on whether it is mainly printed on A4 paper or A3 paper, the general choice is to print A4 paper, which is small and does not take up space.

    From the point of view of printing color, it depends on whether it is mainly printed in color or black.

    From the brand point of view, it is considered to be the best problem, and the first moderate 1,000 yuan is the preferred object.

    Choosing a home printer, you can refer to the detailed content.

  4. Anonymous users2024-02-04

    Canon IP1180 inkjet machine, if you only print black, you should be able to hit 4,000 sheets with a single black continuous supply system, and the connected system with a continuous supply system is less than 300 yuan!! For you...

  5. Anonymous users2024-02-03

    1. About starting: The printer should be turned on after the computer is started, otherwise if the printer is turned on first, the computer will start the printer again, causing additional loss.

    2. About putting paper: the paper in the paper tray must be moderately tight, and the paper must be placed neatly, otherwise it is very easy to jam (don't believe how simple the operation is advertised, if you are not careful, the printer will be settled).

    3. About paper jams: no matter how good the printer is, it is possible that the paper is jammed, you should first cut off the power supply and then open the chassis, otherwise the auspicious attack will burn the machine.

    4. About buying paper: we must believe that "cheap is not good", use laser printers, and don't use paper below 70g. In addition, do not print on paper with a rough surface, because it will generate a lot of dust in the printer due to high heat and static electricity, until it burns out.

    5. About the printing quality and consumption setting: in order to save money, I have tried to print with the saving mode, although this method reduces the depth of the printing color, but can extend the use time by 2-3 times. However, it is important to note that it is not possible to print for a long time with the Ink Saver mode.

    I once typed for more than 4 hours in a row, and the result was a black printout. I didn't find any other reason, I think it may be because of the ink saving.

    6. About viruses: There have been some claims about printer viruses before, but I think the antivirus software I used never told me what it was. However, some viruses may cause the printed document to fail to start, in general, turn off the printer and wait a while to start it will solve the problem.

    The heaviest one, restarting the computer can also become.

    7. About consumables: For a period of time, I used a Canon, and my colleague used Epson's, and the two of us had to change the ink for more than 300 yuan. Every time he changes the ink, he uses 100 yuan to fill it at a time, and I bought the original package. Within half a year, his machine was thrown away.

  6. Anonymous users2024-02-02

    As the saying goes: you can afford to buy a horse, but you can't afford to put a saddle. At present, I have bought a printer hand-to-hand type, but the resources of this consumable are quite sufficient, but the cost is too high:

    An ink cartridge turned out to be 1 8--1 5 of the printer's silver plum**. It would be nice if you could give some discounts on **.

Related questions
18 answers2024-04-16

Epsen ME1 printer comes with the driver does not support win98 system, you go online next.

21 answers2024-04-16

The printer does not print for many reasons, which can be divided into the following situations: >>>More

8 answers2024-04-16

The printhead needs to be cleaned up, see if there is an option in the printer preferences to clean the printhead.

7 answers2024-04-16

HP is the most prevalent.

If you're purely printing or copying, Canon is the right choice!! >>>More

11 answers2024-04-16

What machine? To put it simply, such as Muto 1604!

You turn it off first, unplug it, and let off the static electricity! >>>More