-
When cleaning dust from the monitor screen, remember to turn off the power to the monitor, unplug the display power cord and signal cable, and then carefully wipe it from the center of the screen with a soft, dry cloth. Do not wipe with chemical solutions such as alcohol, let alone use rough cloth, paper and other items to wipe the display, and do not spray liquid directly onto the screen to avoid water vapor invading the inside of the display.
In addition to the display, you can use a brush or a small vacuum cleaner to wipe off dust and dirt from the monitor case frequently, but try not to wipe it with a damp cloth that is moistened with water. Due to the high voltage inside the monitor (there may still be residual power in the high-voltage package after power failure), if you want to remove the dust inside, you must ask a professional to operate, and you cannot open the back cover of the monitor without permission (if the monitor has not passed the warranty period, if there is a problem after opening the seal, it is not covered by the warranty), so as to avoid serious consequences.
-
The screen surface of the display generally has an anti-radiation, anti-glare, and anti-static coating. To avoid damage to the coating, you should use a soft mirror cloth (paper) to gently wipe the dust on the surface of the screen when cleaning the monitor screen. Wiping with water or detergent can damage the coating on the surface of the screen.
-
Wipe with a sponge dipped in warm water, cool and dry before turning on the machine. It doesn't hurt the screen and wipes it clean.
-
Just take a napkin and don't need to dip it in water. Use some force.
-
Water, soft cloth, be sure not to use alcohol. Remember.
-
1. Feasibility of using purified water: Yes.
Cleaning the display with clean water should be the most cost-effective method, although it should be better if you use purified water. It's just that sometimes if there is some dirt on the screen, pure water to clean it seems that it is not enough, so we need to choose a special cleaning agent.
2. Feasibility of special detergent: depending on the brand.
Choosing a dedicated cleaner should be one of the most effective means of cleaning your monitor's screen. Of course, how to choose a good detergent also needs to pay attention, we need to grasp a few key points:
1 Choose a neutral, non-abrasive, non-residue inorganic salt cleaner.
2 Alcohol-free alcohol and amino acid cleaners.
3. Cleaner that does not destroy the coating on the surface of the multi-layer film.
4 It is best to keep the screen clean and bright to prolong the service life.
3. Toothpaste cleaning practicability: the part except the display screen.
Of course, toothpaste can't be used directly to clean the surface of the display, but the Traveler is still quite cheap and effective for cleaning the display case. You can squeeze a little bit on a rag and wipe the stubborn stains on the monitor case to ensure immediate results.
Fourth, after discussing the detergent, we need to discuss the wipe, which is easier, because the wiping of the display screen is required to be relatively soft and does not scratch the surface, this is the most important thing, there are many wipes we can choose from, such as: clean cotton, clean glasses cloth, special wipe cloth for flat color TV screen, etc. Here I recommend a clean cotton cloth or glasses cloth, and then use the above detergents to clean it.
In addition, we can also choose a variety of auxiliary cleaning utensils to make our display cleaner.
What to do if the computer monitor has a blurred screen.
What should I do if there are streaks on my computer screen? Generally, there are two possibilities for this problem, a problem with the graphics card, or a problem with the monitor. >>>More
Does the console still work when the monitor is turned off?
1. Problems with the graphics card.
If the graphics card is broken, there will be a blurred screen, and dust will also appear, check the graphics card, open the chassis to remove dust, this reason is the most likely. >>>More
Discharge the BIOS battery (restore the BIOS factory defaults) It is recommended to plug and unplug the graphics card and memory, clean it up, and polish the gold finger of the graphics card and memory. >>>More