Can a bungalow without property rights be flattened and flattened?

For house demolition, the demolition policy is different in various places, but the bungalow without property rights can not be flattened under normal circumstances.

A bungalow without property rights cannot be flattened and flattened, because you do not have property rights, and the compensation standard for demolition compensation is different from that of a house with property rights, so you can go to the local demolition office for consultation.

If you don't have a bungalow with property rights, you must not be able to top a square meter of one square meter, this depends on the local policy, generally no property rights of the house, they have no square, just lose a little money.

Housing demolition, the demolition policy is different in different places, and the house without property rights cannot be a flat top and a flat roof, and at most a loss fee will be given.

It depends on the specific situation, if your bungalow is an old house handed down from your ancestors, or a homestead house that your family should have, then it is not a flat top and a flat house.

However, if it is built privately, in other words it is not legal, it is nothing.

No, the lack of property rights is an illegal building and will not receive any subsidies and compensation.

If it is being demolished, it depends on the local demolition compensation policy, most places are based on the market price plus the floating ratio, not a flat top and a flat level.

A bungalow without property rights, this one doesn't seem to be able to top a bottle, and a bottle is just that.

If it is a bungalow without property rights, you can't order one bottle at a time, because you don't have property rights, you must go through the property rights procedures.

Generally, there is a compensation coefficient for demolition, which is generally one to one, two to about one.

The snow in the winter in the Northeast is too thick, so it is more convenient to prevent heavy snow from collapsing the roof.

The climate characteristics of the Northeast region: cold and long winters, warm and short summers; There is more precipitation, mostly concentrated in summer, and more snowfall in winter, and the surface snow accumulation time is long.

Spatial distribution of temperature and precipitation in Northeast China: Northeast China spans the warm temperate zone, the middle temperate zone and the cold temperate zone from south to north, and the temperature difference between the north and the south in winter is obvious. Annual precipitation decreases roughly from southeast to northwest.

Why spinal? Because the flat roof can't stand the cold winter in winter, the waterproof layer is easy to crack in this winter, and it is repaired in the summer, and it will be frozen and cracked in the next winter, what should I do? It is not possible to raise the ridge without a ridge, ** is the great east of the Northeast.

The flat roof is much hotter in the summer and much colder in the winter, and it is not conducive to drainage, and the cost of ridged houses is high.

In areas with heavy precipitation, in order to drain and prevent snow accumulation, but also for heat preservation, there are many ridges of dwellings, and in the arid and rainy northeast and west, the so-called "Beijing Ping" can be seen everywhere.

It's good to have the same flat roof as the building! However, flat roofs require waterproof technology, high cost, and technical support, and rural areas generally cannot reach such a level! The ridge is also resistant to snow pressure and easy to slide.

It is also good for rainfall. The top floor of the building is not very good, it is easy to rain, cold in winter and hot in summer, if it is the top floor of the slope roof, it is much better.

North China flat roof, because of the drought and little rain in North China, there is no snow in winter, the roof does not bear pressure, and it can also dry grain. In the Northeast, there is continuous rain in summer and heavy snow in winter, and there is no way to dry grain, so there must be a roof.

The ridge is good for thermal insulation, and the triangular structure can use space pad insulation material.

Ridged houses are good for drainage, of course, durable, but costly. In the countryside, the only houses that are still intact for 100 years are tiled houses (ridged houses), all of which were built by wealthy people. And it would be nice for a bungalow to last for forty or fifty years.

At present, most buildings in Northeast China also have ridges, which are conducive to drainage, and the top floor is not easy to leak, and it is also insulated in winter and sunscreen in summer.

Hello! It's to keep warm! Shenyang has a first-class project to raise the roof ridge of the building in order to keep warm!

The snow in the northeast is heavy, and it is easy to be crushed by the snow when it snows on the ridge, and the bungalows in North China are not ridgeless because of the small snow in winter. The load-bearing beams of the building are very strong, so there is basically no need to ridge them.

The main consideration is the snow cover in winter, so that the snow pressure is spread to both sides.

As soon as the snow melts in spring, it is strange that the flat-roofed house does not leak.

The snow is heavy, the roof is afraid of pressure, and the ridge of the roof will reduce the pressure, and the snow water will easily flow down!

In my Shandong, many bungalows don't leak at all, and now they don't need floor slabs, they are all directly concrete

It's not all, my family is flat.

The natural environment determines the superstructure.

If it's flat, there will be no skating to play.

The weather in the northeast is cold, there is a lot of snow, and the ridge is not easy to accumulate snow.

Cold-proof is also a symbol of living standards.

It should be determined according to the local employment**. Generally, it is about 600-800 yuan.

It is recommended to find a professional decoration design company, explain the design drawings, and monitor the whole construction process, which can ensure the quality. The budget can be seen before the contract is signed, and it is indicated on the contract that no later additions are allowed, and the budget is also ***! I wish you a smooth and pleasant renovation!

If you are near Nanjing, you can consider the design of dolong for both hard decoration and soft decoration design, and there is an ideal service organization. Thank you!

Flat roof, when the rainfall is relatively heavy, the drain is not smooth, through the weak link of the waterproof layer (such as the crack of the waterproof membrane, etc.) into the waterproof layer, the water circulates in the waterproof layer, through the cracks or holes in the floor slab, etc.

If you want to completely solve this water leakage problem, you should remove all the original waterproof layer, and then carry out waterproof treatment!

Shanghai Gulan Building Waterproof Project **** Respectfully!!

Once there is a leakage point in the waterproofing of the original membrane, the water will enter the bottom of the membrane, exist there, and then leak down from the weak point of the reinforced concrete floor slab, so the leakage water of the membrane is not good to do only a little, it will "channel the water"! I don't understand your original waterproof structure, whether there is insulation or something, generally if there are no cracks in the concrete itself, the construction quality can be, and it will not leak without waterproofing, the problem is that your current house has cracks, so you deal with the cracks, and then make waterproof mortar, do a good job of the slope, the water drainage goes faster, and the probability of water leakage is much less! More information, better suggestions, free concrete waterproof leakage repair technical consultation, free of charge to avoid today's repair, tomorrow's leakage, every year repair, every year leakage trouble.

It is okay to paste the waterproof layer, but it is easy to cause leakage after the surface expands and shrinks; To solve the problem, you can try Qingdao Baoquan nano waterproofing agent.

C30 concrete, stressed steel HRB400, cross-sectional height to one-twelfth of the span, width 250 or 300, column cross-section to 400-450 should be no problem. Now the main question is whether the bearing capacity of the foundation of your house and the bearing capacity of one layer of columns (taking into account the seismic fortification requirements) can meet the requirements of adding one floor. It is recommended to find a structural professional to calculate it, or use lightweight materials such as steel structures and glass curtain walls to be safer.

Let a professional systematically help you analyze it.

Planning permission must be obtained, otherwise it is illegal to renovate.

This must be reported to the Housing Authority, and you can consult the relevant departments of the local Housing Authority for details.

Please tell us a little bit about yourself, including the size of the house (length and width), orientation, design requirements, the perimeter of the foundation, ......

The high side room is called noisy, which is unlucky. Moreover, the construction of side houses needs to be built on the left and right, and symmetry can be. It is possible to add a simple and beautiful view of the building on the roof of the main house, which is higher than the side room.

As long as it's not higher than the ridge of the main house, it doesn't matter.