Lenovo S6000 pressed the power button and did not respond

Please confirm whether the battery is depleted, it is recommended to charge it for half an hour before trying to turn it on.

If the screen is black, you can press and hold the power button to force restart the device.

Dear Lenovo users, hello!

Dear Lenovo users, hello!

Please electrostatic discharge, unplug the power cord and battery, press and hold the power button for 3-5 seconds, repeat several times and then try to turn on the power; If it does not turn on normally, please go to the Lenovo service station for maintenance.

Hello. We apologize for the impact on your use.

If the device cannot be turned on by pressing the power button, it is recommended that you press and hold for more than 8 seconds before turning on the device, if it is still abnormal, please use the standard charger to connect for half an hour before turning on the device. If the problem still cannot be effectively solved, it is not ruled out that it is caused by the failure of physical buttons or related power management components, for your normal use in the future, we recommend that you take the time to go to a nearby Lenovo authorized repair station for specific testing and treatment.

Lenovo authorized after-sales site inquiry:

You are welcome to contact us or visit Lenovo at any time

Consult to find out.

It could be due to the following reasons:

1.Power failure: The power supply may fail, causing the computer to fail to turn on properly. Try replacing the power supply or checking that the power cord is well connected.

2.Internal Dry Wheel Memory Failure: The memory may be damaged by a stool failure, resulting in the computer not being able to boot normally. You can try to replace or reseat the memory module.

3.Graphics card failure: The graphics card may malfunction, causing the computer to fail to boot properly. You can try replacing the graphics card or reinserting it.

4.Hard disk failure: The hard disk may malfunction, causing the computer to fail to boot properly. You can try to replace the hard disk or perform hard disk detection and repair.

5.Motherboard failure: The motherboard may malfunction, causing the computer to fail to boot properly. You can try to replace the motherboard or perform a motherboard inspection repair.

If none of the above methods can solve the problem, it is recommended to contact a professional maintenance personnel for maintenance.

Take Lenovo Thinkbook15P, Win10 system as an example, the processing method of Lenovo computer boot button flashing but not booting is: Excessive use of the notebook or long-term standby battery power consumption to form a laptop power shortage, it is recommended to charge more before use to solve this problem; Loose hardware or water ingress into the laptop causes nothing to happen when it boots up. If the hardware is loose, open the notebook and reinsert the loose hardware; If the hardware is damaged, Biyou needs to replace the damaged hardware after testing with a professional instrument; If the hardware is loose or the COMS data is the same as the error, the serial port, parallel port, and hard disk cannot be recognized when booting, and it is necessary to re-insert and remove the loose hardware and restore the COMS data to troubleshoot; The computer alarm cannot enter the system.

Any alarm sound that emits a "flute" or "flute" when the computer starts up is caused by hardware error or damage. This kind of fault should be repaired according to the different alarm sounds; The operating system is unable to boot due to the question. This kind of problem is always reflected in the system boot error or reboot after the hardware detection is completed, and the solution is to recover the system or reinstall the system; If none of the above operations can solve the problem, it is recommended to send the Lenovo laptop to the repair center for testing and repair.

The above answer applies to most models of Lenovo laptops.

It could be due to the following reasons:

1.Power failure: Insufficient power supply** or damage to the power supply may cause the computer to not turn on properly.

2.Memory failure: A memory failure may cause the computer to fail to boot properly.

3.Hard drive failure: A hard drive failure can cause your computer to not boot properly.

4.Motherboard failure: A motherboard failure may cause your computer to not boot properly.

5.Graphics card failure: A faulty graphics card may cause the computer to fail to boot properly.

Workaround:1Check if the power supply is working properly, if the power supply fails, the power supply needs to be replaced.

2.Check whether the memory is working properly, if the memory is faulty, you need to replace the memory.

3.Check if the hard drive is working properly, if the hard drive fails, you need to replace the hard drive.

4.Check if the motherboard is working properly, if the motherboard is faulty, you need to replace the motherboard.

5.Check if the graphics card is working properly, if the graphics card is faulty, you need to replace the graphics card.

This is the collapse of the mobile phone operating system, it is recommended that you flash the phone, that is, install it from the new next operating program.