-
The air contains vaporized water, which condenses into water when it encounters a cold object. So the air conditioner should be designed with drainage channels to let the water drain down the pipes, which is what you see dripping.
-
The installation is tilted or there is too much dust in the inner machine, and the drain pipe is broken.
-
You can continue to use it. Water leakage of the indoor unit of the air conditioner, this phenomenon generally occurs in the following situations: when the air conditioner is running in the refrigeration mode, the indoor machine drips, indicating that the condensate of the air conditioner is not discharged smoothly or the condensation of the air outlet of the air conditioner causes dripping; When the air conditioner outlet pipe is installed and drilled, the outside is higher than the interior, which may also be caused by the blockage of the outlet pipe; If it is treated or there is too much water leakage, it is difficult to rule out other reasons, and it is better to report to the air conditioner manufacturer for after-sales repair.
Solution to dripping water in the air conditioner:
The poor drainage of condensate in the internal unit can be solved by yourself.
One is to check whether the drainage pipe is damaged, the drainage pipe is out of the wall together with the pipeline from the inner machine to the outer machine, it is easy to see outside the wall, if it does not drip is blocked or a section of plastic pipe in the room is damaged and leaking, it can be treated. Sincerely.
The second is that the sink of the inner machine is blocked by dust, this sink is in the lowest part of the inner machine, open the lid to see the stuffy cherry blossoms, and use a long brush to brush off the dust. If necessary, the inner unit can be tilted a little in the direction of the drainage hole to facilitate drainage.
The third is that you can hit the manufacturer's maintenance station, which will charge dozens of yuan for door-to-door inspection, and be polite to the master, helping to replace the drainage pipe is not considered to repair the machine, and it will not charge money.
-
Indoor unit dripping after air conditioner shutdown Hello, dear. There are the following reasons for the dripping of the indoor manuscript envy machine: 1. Improper installation of the body
The indoor unit is tilted, and the direction of the pipe intersection is too high. 2. Poor drainage pipe: due to the slack or bending of the drainage pipe into a wave shape, the drainage is not smooth.
3. Dew condensation on the pipeline: The insulation material that is eliminated from the pipeline is too poor or too thin, and when the refrigerant in the pipe passes, it will cause the mold formation pie to know the dew. 4. Dripping water from outdoor heat exchanger:
The heat exchanger is full of dust and causes the temperature of the heat exchange to be uneven, and water droplets are generated in the middle of the heat exchanger, and the water droplets falling outside the water tray will drip into the room; The lack of refrigerant in the air-conditioning system causes the indoor unit to freeze, and the water droplets formed by the melting of the ice do not drip directly into the water tray.
-
The causes and solutions of dripping water in the indoor unit of the air conditioner are as follows:
1. The position of the air conditioner is offset. If the position of the air conditioner is offset, the direction of the drain pipe will become higher, and the condensate will flow out of the air outlet in the opposite direction of the drain pipe. Workaround:
Re-measure the installation height of the air conditioner, pay attention to appropriately reduce the position of the air conditioner drain to ensure that the condensate can flow out smoothly through the drain pipe, and fix the internal hanging plate.
2. The drain pipe is blocked. The drain pipe is blocked, and the condensate cannot be discharged normally, and can only flow out from the air outlet of the internal unit, which is also relatively common. Workaround:
Just replace the drain pipe, if the drain pipe is not a slope but curved, it will also cause condensate to flow back, and you need to pay attention to it when inspecting.
3. Condensation appears in the piping. In addition to the evaporator and air outlet, this is another place where condensate is generated. When the air conditioner is in operation, the temperature of the pipes used for the refrigerant is very low, and it is generally wrapped with an insulation layer to prevent condensation from developing.
However, if the insulation is damaged, condensation will appear on the pipes and drip directly from the pipes. Solution: Remove the old insulation layer and rewrap the pipe.
4. Air conditioning heat exchanger. If the air conditioner filter is not cleaned for a long time, dust accumulation will cause the hydrophilic aluminum foil of the air conditioner to deteriorate. After the air conditioner is cooled, the condensate cannot flow directly into the sink and will drip from the internal unit into the room.
Solution: Just clean the air conditioner filter regularly.
-
This is normal, but frequent dripping may be a malfunction. When the air conditioner has a low air velocity, a large temperature difference between indoor and outdoor and the doors and windows are not closed, it is easy to cause condensation of water vapor, resulting in dripping water at the air outlet, which is a normal phenomenon.
If it is not the above reasons, it is the failure that causes the air outlet to drip and should be repaired and dealt with in time, such as the dirty filter blockage, the wrong installation position of the air conditioner, the blockage of the outlet pipe, and the high water level.
Air conditioner drip solution:
The drain pipe is loose or bent into a wave shape, resulting in poor drainage, and the drain pipe should be replaced in time.
If the outdoor heat exchanger is full of dust and the temperature of the heat exchange is uneven, it is easy to generate water droplets in the exchange, so the dust should be cleaned regularly.
If the indoor unit freezes due to insufficient refrigerant and drips after melting, the refrigerant should be replenished in time to avoid damage to the inside of the air conditioner.
You can check it yourself according to the above methods, if you can solve it in pure files, it is very good, if you can't solve it yourself, you should ask professional and technical personnel to come to deal with it in time.
Precautions for using air conditioners:
If you are sweating profusely after working outside, you should not blow the cold air directly at this time, and you can stay in a place where the air conditioning is not strong for a while.
The air conditioner should not be used for too long each time, and it should be stopped for two hours to maintain indoor ventilation.
-
The problems of the air conditioner dripping all the time are: the indoor unit is offset, the refrigerant is insufficient, and the filter is blocked.
1. Offset of indoor unit.
The solution is to move the air conditioner, recalibrate the position of the air conditioner with an ordinary liquid level, and trim or lower the end of the condensate pipe of the air conditioner as much as possible.
2. Insufficient refrigerantIf the refrigerant in the air conditioner is insufficient or fluoride leakage, it will lead to the weakening of the temperature regulation effect, the indoor temperature is too high, and the humidity increases, which in turn leads to the condensation of the internal machine and the formation of dripping, which requires professional maintenance personnel to add refrigerant.
3. The filter screen is blocked.
If the air conditioner filter is not cleaned for a long time, dust and dirt will accumulate, which will lead to poor air circulation, increased humidity, and eventually cause the internal unit to drip water. You can remove the filter screen and clean it yourself, and then reinstall it back into the inner machine after washing and drying.
Precautions for the use of air conditioners
1. Don't switch on and off frequently when using the air conditioner, because every time you turn on the compressor, you need to restart, and it takes a huge current to start the compressor, which will easily cause high power consumption, so if you have a short time to travel, you don't need to turn off the air conditioner.
2. If the air conditioner is turned on for a long time, the air in the room will become dry, so it is necessary to pay attention to increasing the indoor humidity, put a pot of water next to you, and place indoor potted plants, which can increase the humidity of the environment.
3. When the air conditioner is turned on, the doors and windows will be closed tightly to prevent the air conditioning from leaking, and the air circulation will deteriorate for a long time. If the air conditioner is found to have peculiar smell or smoke, it should be stopped immediately for inspection.
If the air conditioner is not cooling, you can troubleshoot it by following these steps:1Incorrect usage mode Please check the set mode: >>>More
Refurbished disk,Mine is,No matter what software you use, you can't test it.,The time displayed was only 10 minutes.,The number of times is 3.Take it to after-sales, it can't be repaired, it is said to be refurbished, and it is said that the hard disk has been used for more than 10,000 hours, and the number of times is unknown. The logger doesn't record anymore!
There are several reasons why the air conditioner starts on its own: >>>More
Reasons why the outdoor air conditioner fan does not rotate: It may be caused by short circuit or open circuit of the fan motor coil, damage to the starting capacitor, wear or poor lubrication of the bearing, winding fan blades, etc. First, let's check if the compressor is still working. >>>More
Check whether the fan starter is damaged, the possibility of the fan motor being broken is very small. If the dirty cold air of the internal evaporator cannot be dispersed or the condenser of the external unit is dirty and the heat dissipation is poor, it will cause the compressor to be protected from high temperature and stop working, then the fan motor will definitely not rotate if it is also high. Generally, in addition to the reason of the fan motor itself, such failures are caused by poor heat dissipation under normal circumstances. >>>More