-
Anonymous users2024-02-08Reboot failures don't happen for no reason, right, what did you do before restarting? What hardware has been upgraded? You can elaborate on that.
1. There may be incompatibilities between systems or programs, and it is recommended to restore the system or reinstall it.
2. The CPU or other hardware temperature is too high, and the memory and graphics card are incompatible or faulty.
3. Power failure and voltage instability can also cause automatic restart.
4. Incompatible drivers can also lead to restarts.
5. Failure of motherboard parts.
6. Change the default automatic restart of the system: right-click on My Computer Properties Advanced Settings in Startup and Failure Recovery Remove the checkmark before "Auto Restart" in System Failure, and then press OK and Apply to restart the computer.
If the reinstallation system is ineffective, it may be caused by a hardware problem, and it is recommended to overhaul it.
Go to the Device Manager and check if there are any conflicting places with the various drivers, and if there are any yellow ones! If there is a possibility that the device driver is incompatible with the system; Then delete the drivers for the sound card, graphics card, network card, etc., and then install the drivers one by one, and restart each device installed.
The second computer, to check which device's driver is causing the failure, find out, ** the new version of the driver of the faulty device, and then install it. Then clean the dust in the computer, clean the gold finger of the memory, graphics card and other equipment, and reinstall the memory and other equipment.
-
Anonymous users2024-02-07Called, is it a drip-drip-drip-drip sound?
-
Anonymous users2024-02-06Reasons for computer restart and solutions:
1. There may be a problem with the BIOS settings, enter the BIOS to restore the default settings or take out the motherboard's battery, reverse buckle, and discharge. Purpose: To restore the default values of the BIOS settings and eliminate the automatic reboot or shutdown of the BIOS cooling presets.
If the software or the program software is restarted when running the program software, it may be a restart caused by the program software, generally the program software is uninstalled and reinstalled, if the fault persists, it means that the program software itself has an error and cannot be used.
3. In safe mode.
Use anti-virus software.
If you restart the virus for troubleshooting, it is a reboot failure caused by the virus.
4. Press F8 to enter the safe mode after booting, and then exit and enter the normal mode. You can also use the system restore that comes with your system.
function to restore, if the reboot is troubleshooting, it is the reboot caused by the corruption of the system files.
5. If the fault is still there, then check the power supply, the power supply quality is poor, aging or the power is too small, can not meet the power supply needs of the computer accessories, you can replace the high-power and high-quality power supply, if the troubleshooting, it is the restart fault caused by the power supply.
6. If the computer restarts when hot-swapping a device, you can solve it according to item 3.
7. Then use the elimination method to check the memory, graphics card, CPU, CPU fan, motherboard, etc.
8. Check the memory, the memory quality is not up to standard, the heat dissipation is poor, overclocking, the memory of different brands is mixed and the CAS value is set too low, etc., which can cause the computer to restart, you can use the replacement method to test the memory, and adjust the memory parameters in the BIOS accordingly.
9. Check the motherboard, the motherboard is aging, the capacitor fails or bursts, the motherboard and the chassis backplane are short-circuited, etc., which can cause a restart, you can take the motherboard out of the chassis to check or test, and then check the CPU fan heatsink.
If it is dry, clean the silicone on the CPU fan and reapply the good silicone. Then check whether the CPU fan is turning and whether the CPU temperature is normal.
10. Cleaning method: It is a method to eliminate faults by cleaning the dust of the parts in the computer host. Dust is one of the factors that can also cause the failure of automatic computer restart, dust can cause parts aging, pin oxidation, poor contact, short circuits and other failures.
For these faults caused by dust, it is generally more effective to use the cleaning method.
11. Change the default automatic restart of the system: right-click on My Computer Properties Advanced Settings in Startup and Fault Recovery Remove the check mark before "Auto Restart" in System Failure, and then press OK and Apply to restart the computer.
12. The power supply system is unstable, which can also cause the occurrence of restart failure, and a UPS backup power supply with voltage stabilization function can be considered.
The relationship between the power supply is not enough, because at the beginning, only the CPU, memory, hard disk and a small part of the hardware on the board are working, and the load is not large, the power supply power can be handled, and you can give the CPU fan enough power, but after booting up, you have to run some things, such as movies, games or something, so that your graphics card begins to officially work at a high load, and the sound card is also (especially the independent sound card), if you are connected to the Internet, then your network card will begin to calculate the uplink and downlink of the broadband, Due to your various operations, the CPU usage is getting higher and higher, and the hard disk is also frequently reading and writing data. At this time, it is very different from just turning on for about 10 minutes, the load of the power supply exceeds 5 times that of just turning on for about 10 minutes, due to the need to maintain the function of various hardware, the power supply of the CPU fan is not so important at this time, from slowing down to stopping, and then to the CPU temperature rising, the motherboard after 965 will generally collapse above the CPU temperature of 176 degrees, just like you. >>>More
They said it in detail enough
That's the sound produced by the CPU fan working, as the CPU processing tasks gradually increase, the fan on the CPU will speed up, and there will be a burst of noise inside the inverted case, which is normal! There is also an increase in dust on the CPU fan, generally these two possibilities! It also means that your computer needs to be dusted up, or the configuration needs to be improved!
The host owes a flat and hits him. - I have a little donkey that I never ride.
Auto Shutdown Troubleshooting Methods:
1. The power supply system is unstable, which can cause the occurrence of automatic shutdown faults, and a UPS backup power supply with voltage stabilization function can be considered. >>>More