The trunk of the car was knocked in, how much does it cost to repair

If the body is dented and the paint is off, it is recommended to paint the sheet metal.

About 300 to 500, but if you don't have paint off and care about the original car paint, you can try the paint-free car dent repair technology, no need to destroy the original car paint for body concave repair, the principle is actually very simple, is based on optics, mechanics, the use of lever principle.

Slowly restore the pits of different depths to the original appearance, look at the following picture and you can see it at a glance.

The specific size of your depression can be determined, similar to the picture in the picture, generally about 300 yuan can be done.

<> the picture below is the repair effect of our sharkskin car dent repair direct store**, the first one**The black border area on the left is the appearance of the original painted body, and the right is the appearance of the repaired body, how can you feel the specific effect, but after all, there are so many stores in the country that the car dent repair can not be generalized, so I suggest that you still go to the regular brand store to repair, so that the technical level will be *** and** fixed, unlike small shops that will only shout prices all over the sky.

Hello dear! It depends on the degree and area of the recess, and the sheet metal and paint repair will cost about 200-500 yuan! I hope it can help you, please set it as! Thank you!

Looking at the picture, I can only see that it is not too hurt 7, which is treated in the repair shop with a suction cup, without sheet metal, and the wax after sucking it out, at most 300 400 will be done, a small problem.

If the dent is serious, you can only replace the trunk, and the specific ** depends on the model. Hope mine can help you.

If it is a large area of damage, it needs to be replaced with a new one, if the damage is not large or the damage is not serious, and there is no need to replace the new trunk, go directly to the repair shop to do a sheet metal paint.

There are many factors that affect whether the trunk lid is repaired or replaced. Generally, insurance companies also insist that they can be repaired but not replaced. In order to reduce economic losses, it is recommended to paint sheet metal, and whether it is sheet metal repair or replacement, it needs to be repainted, and there will be color difference, but it is obviously not an obvious problem.

Trunk introduction.

The trunk is an indispensable function for the current car, we are not only convenient to hold the things we need daily, but also can put some clothes and necessary items when going out to play, at this time many people put all the things in the trunk, some kinds of things try not to put in the trunk.

However, the use of the trunk should pay attention to the greater the weight of the items on the car, the greater the fuel consumption of the car, that is to say, when there are more and more things in the trunk, the fuel consumption will also increase, that is to say, after the weight increases, it will drive up the inertia will be more and more, at this time once it encounters a rear-end collision, it will increase its severity.

Your this is not serious, the paint surface is not damaged, it is recommended to do dent repairIf the replacement has a greater impact on the second-hand retention rate, the replacement needs to be disassembled, and you can judge whether to replace and disassemble by looking at the screws, the original paint and accessories are very precious, and must not be replaced.

Introduction to the car dent repair is based on the principles of optics, physics and mechanics, using the principle of lever to reduce the size and depth of the car due to various external reasons, provided that the body paint is not damaged, the metal surface is not too stretched, is a modern process.

Automobile dent repair technology is an international advanced technology for the repair of various parts of the car appearance, due to the impact of external forces to form various depressions for repair, the technology also greatly shortens the repair time (a depression repair takes about 20---40 minutes), and greatly reduces the cost (only about 50% of the traditional sheet metal and painting).

This kind of suggestion to replace the trunk cover, this kind of pit is deeper, the sheet metal to get out of the putty is thicker, so that the weather is hot putty can not be left for a few years will crack, this more serious pit is recommended to replace, although the cost of sheet metal maintenance is low but the weather resistance is not long, there is no replacement of the overall cover cost-effective.

The lower right corner of the trunk of the car is deformed, if the deformation is not large, it is better to repair, and the cost is lower than the replacement, and it does not affect the appearance of the vehicle after restoration.

If it's insurance, it's recommended that you change it, and the money that should be changed is the same as your rest money, in fact, it should be about the same, after all, repaired, can he be artificial? Not so small flat, your car is also newly bought, and I personally recommend that you still replace it.

Your trunk is not light, I suggest you should change it to a new one, this repair will cost a lot of money, it is better to change.

Hello, depending on the situation, the damage is so serious, it is recommended to replace it. Hope.

There is a storefront that does not need to be painted to repair the body depression, and it can be repaired to the same state as the original factory for about 300 yuanIf there is no such process, you can only use the traditional sheet metal spray paint repair, about 500 yuan for 4S shop, about 300 yuan for professional sheet metal spray shop, and about 200 yuan for roadside shop. Take the insurance directly to the 4S store, and it is recommended to go to a professional sheet metal spraying shop at your own expense, and the quality of the roadside shop is not guaranteed.

In fact, the repair of car dents will have unwritten rules in general repair shops, as long as you go to repair the paint, the sheet metal master will pour out the dent place, and then spray paint, a small range of plastic surgery is not charged separately, which is equivalent to the repair of paint**, repair the dent Bai Rao, **generally around 300 yuan.

The determinant of the charge for car dent repair.

1. The position of the body, the smoother the body, the lower the difficulty, and the corresponding ** is also cheaper;

2. The area of the depression, the larger the area, the more difficult it is, the more expensive the charge;

3. The sharpness of the depression, the higher the sharpness of the depression, the more difficult it is to repair;

4. The repair cost of high-end luxury cars is more expensive than that of low-end models.

Hello, if there is no paint off, you can remove the trunk interior panel, slowly knock it out by hand, if it is off the paint or at the edge of the place can only be moved into the repair, **300 yuan or so. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

For these different car sheet metal repair, in different regions, different models, the charges are different, generally speaking, it depends on which part it is, how big the depression is, generally 100 to 400 yuan, or according to the specific situation to decide. What are the processes of automobile sheet metal restoration?

1. Determine the plan.

After driving the vehicle to the 4S shop, the maintenance master should determine the maintenance plan according to the degree of damage to the vehicle before starting the sheet metal spraying, and different solutions will be taken for different degrees of depression.

2. Sheet metal shaping.

After determining the appropriate repair plan, the deformed parts are cut, polished, stretched, fired, and oxygen returned, and the sheet metal repair of the car is not only to restore the original appearance of the vehicle, but also to maintain the hardness of the metal material to the greatest extent possible, which is still relatively high.

3. Scrape the ash and set the shape.

After the sheet metal is corrected, the mechanic will shape the waistline of the body and adjust its flatness by scraping the ash and shaping the body.

4. Spray paint.

In all the sheet metal repair process, the process of spraying paint is more complicated, and it is necessary to spray primer, primer, mix paint, spray topcoat, dry paint and other processes, and control the surrounding working environment in the process of automobile painting.

5. Paint treatment.

After the car is painted, it is also a relatively simple paint maintenance, for some defective places, but also to polish, to avoid problems when driving in the future.

Hello, the general model of slight sheet metal and painting in the repair shop about 300. Hope it helps you and have a great day! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, about 200, I hope mine can help you, if you don't understand something, you can continue to ask me! Have a great day! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Summary. The cost of repairing a trunk indentation will vary depending on the size and area of the indentation, the model and brand of the vehicle, and there is currently no uniform repair**. For example, the same model of vehicle, the dent part is different, the size is different, and the cost is different, but no matter what kind of car it is, the maintenance fee after the dent will not be less than 200 yuan, which is still under the premise of not painting.

When the value of the vehicle is high, the maintenance** will also increase. 1. The trunk is not very concave, and only a small amount of depression can be seen with the naked eye, so it is relatively simple to repair, and only a simple repair is required, and the maintenance cost is low.

The cost of repairing a trunk indentation will vary depending on the size and area of the indentation, the model and brand of the vehicle, and there is currently no uniform repair**. For example, the same model of vehicle, the dent is different, the size is different, and the cost is different, but no matter what kind of car, the maintenance fee after the depression will not be less than 200 yuan, which is still under the premise of not painting. When the value of the vehicle is high, the maintenance** will also increase.

1. The trunk is not concave to a large extent, and only a small amount of depression can be seen with the naked eye, so the maintenance is relatively simple, and only a simple repair is required, and the maintenance cost is low.

Generally, this is done in the repair shop with suction cups, without sheet metal, and the wax after sucking out is up to 300 400, a small problem.

If the trunk crash is not particularly serious, the depression does not hurt the paint, you can choose the dent without trace repair technology, and the ordinary 2-3cm dent repair cost is within 500 yuan. However, the trunk is particularly seriously dented, and either the pin is painted in sheet metal, or the trunk is completely replaced. Sheet metal painting is more expensive than dent repair because of the additional step of repairing the car paint.

Trunk replacement** is relatively high, and the specific ** depends on the basic basis of the vehicle.

Hello dear, the trunk door was knocked into a recess, related faint maintenance plan. First, if the dent is not serious, you can disturb the sheet metal for repair, and the related cost is generally about 300 to 400 in the outside repair shop. Second, if it is particularly serious, it is necessary to replace the original parts of the trunk door about 2400 to 2600, and the auxiliary parts are about 1500.

Third, if you carry out the recessed sheet metal related to the stove Li hall in the 4S store, the cost will be about 800 to 900. Hello, I wish you a happy family, if necessary, you can continue to consult, I will always wait for your reply I wish you good luck, everything goes well, and a happy life! Kiss kiss kiss.