Why is it normal to use a router, one machine is very slow, and one machine is normal

Which computer do you set up as the host computer (here refers to the computer that connects to the main data of the router, when the computer is paralyzed, the other computers connected to it will also be paralyzed, so to speak, the computer bound to the router)? Or maybe it's a problem with the configuration of one of your computers. Most likely, the computer you use frequently has too much data traffic, and some of these networked software are taking up too much traffic.

Like antivirus. Sometimes there are too many programs running, which puts a load on the network, and there will be a period of time when the network speed is super slow. Also called overdraft traffic.

Like a wire with a constant flow of current, when you release a large amount of charge at once, there will be a void in the middle, and it will take a while for the later energy to make up for the large amount of consumption and resume normal operation.

I advise you not to **** every day, I know that the monthly amount of the router is certain, but don't covet that little bit of traffic. Do you think telcos are so good? It defines the size of the traffic over the average time.

Personally, I don't support the use of two computers at the same time, even if the other computer is not turned on, some of the traffic will automatically flow in, and finally the ownership of the information traffic will return to the telecom company. You must know that it is a loss to choose to share the Internet speed, you don't know how many computers use one router... It might cost a little more, but it's nothing for a computer enthusiast.

First of all, use two machines to test the Internet speed, and then search for broadband test software. Then optimize the slow system with the optimization master, then reconnect to the network, and then test, hehe, no, change the port, hehe, I don't know what to do with the rest.

The problem of your machine itself, telecommunications now has no such restrictions.

You clean up the temporary folder and try it.

You see if your router limits the speed of your other machine (which can be set on the router) Is it not bad to have a very slow machine on yours! Oh (you can also see what is the **speed of the slow machine on the broadband connection) If it's very slow, it's the router that is limited If it's not slow, it's the problem of the machine!

Possible reasons for the slower and slower Wi-Fi internet access are:

1.Enabled Thunderbolt, Windows Update and other network occupation software.

2.The router is set up with bandwidth control.

3.The wireless router was rubbed into the net.

4.Line problems, such as network cables that are not connected steadily, poor network cable quality, and line sequence errors.

5.The router is running for too long and overheating internally.

6.Wireless interference.

Workaround:1Enable the traffic monitoring feature to see which software is taking up your internet speed.

2.Go to the traffic management page of the router gateway to check which device occupies the highest network speed and record it.

3.Go to the DHCP page of the router gateway and check whether there are any unknown devices connected to the network. Record the MAC address of the device and disable its network access through MAC filtering in advanced settings.

4.Turn off the router for 5 minutes and check whether the line connection is normal.

5.Keep your wireless router away from electromagnetic devices. Shorten the distance between network equipment and wireless routers, reduce the possibility of signal attenuation and interference, and increase wireless relay amplification to expand WiFi signal coverage.

It is caused by heating after a long time, and the electrical components have high temperature requirements.

The router is also a machine, and it can't be turned on all the time, so turn it off when it's not in use, and just let it take a break.

It depends on the time used and the amount of data traffic.

After a while, restart the route, and it should be restored.

3 ways to solve all router setting exceptions:

Press (hold for 5 seconds) the router's reset button and wait until all the lights are on together for the reset to be successful.

After the reset is successful, you will need to set up the router again (there is a wizard), because it has been restored to the factory defaults.

Resources.

1.The heat dissipation of the router is not good, and the chip temperature is too high to affect the function.

2.If the computer runs for a long time, the number of acquired programs increases, the memory is occupied, and the speed will slow down.

Whether you are a unit or a home, when it comes to the peak period of Internet access, it will be stuck, and you can set the speed limit through the route. If you are a single line, you can see if there are other programs on the computer to access the network, such as Thunderbolt BT eMule and other software, if you install 360, it also comes with an automatic network speed protection function, after you open the web page, you will be affected by other things.

You're using a plastic-shell router! The router actually has CPU memory.

After a long period of large data throughput, the router is stuck.

Restart the router after powering off, and that's it!

The last thing that can slow down your internet is that there are a lot of people using your home's WiFi signal. There are always many people in life who are unwilling to spend money and will choose to rub other people's networks, but when there are too many devices connected to a router, the network speed will slow down. So when you find that your internet speed is slow, you can first see if your router is faulty, if the router is not faulty, then it is likely that someone is rubbing your wifi signal.

The router is divided into 100 Gigabit and Gigabit, you buy 100 Gigabit with up to 6 mobile phones, don't be afraid to spend money to buy a Gigabit router, although it is more expensive, you don't need to change it later, in case you use more network equipment later. There is also a bit of rush hour for Internet access, just like traffic jams during rush hour on the road, so it's slow.

The router itself does not slow down the network and is most likely due to incorrect settings, unscientific use, or other environmental factors. See if anyone is using your router to surf the Internet, or if the router is throttled, etc.

After connecting to the router, the network is limited by many home appliances, such as refrigerators, TVs, etc. Because these high-power appliances generate powerful electromagnetic waves, the network speed becomes very slow. If your internet connection is slow, you can check if it is interfered with by electromagnetic waves.

Because the router also has the largest network speed limit, and the router has several interfaces, each interface can be said to distribute the network speed evenly, so plugging in the router will slow down the network speed. And the router itself has to share a part of the network speed.

Because the network speed of many operators is false, and after the conversion of the router, a lot of network speed is lost, so it will become particularly slow, which is also the situation that everyone is facing now.

When the router is connected, the network will be interfered with by surrounding electrical appliances. The speed of the network depends not only on the carrier and router, but also on microwave ovens, induction cookers, lamps, sound, and cameras. It is most likely to affect the transmission of wireless network signals or even slow down the speed of the network.

The speed of the network does not only depend on the carrier and router, but microwave ovens, induction cookers, lamps, sound, and cameras are most likely to affect the transmission of wireless network signals, or even slow down the speed of the network. Its powerful electromagnetic waves can significantly interfere with the signal, causing transmission to be blocked. In addition, there are televisions, refrigerators, etc., which can interfere with the signal.

After connecting the router, then some functions of the network will be scattered in various places, and there will be a network in every corner of the house, so the speed will become very slow.

Because the router is to divide your own network speed into 2 computers, of course the speed is slow. Multi-user must have shared the bandwidth, so it's normal that it can't compare to the original speed.

On the one hand, there are strong electromagnetic waves around that will interfere with the signal, resulting in blocked transmission, and on the other hand, there are televisions, refrigerators, etc. that will interfere with the signal, so you can place the router in the open space in the center of the home, so that the signal can be transmitted to every corner of the home.

The network cable is very fast, the router is very slow, that is the reason for the router, enter the router settings page to restore the router to factory settings, and then the router is poor.

Televisions, refrigerators, microwave ovens, induction cookers, lamps, etc., can significantly interfere with the signal and cause transmission to be blocked. The high density of glass products can weaken the signal receptivity, and metal products such as iron or titanium products can also block the signal and cause slow network speeds.

Check whether the installed router is running normally, and then check whether there are a large number of clients using the wireless network, which is also an important reason for the network operation speed.

I don't think the network slowing down has anything to do with the router. We all know that the network speed is related to the router and the operator, as well as some electricity consumption at home, so it is recommended to consider many aspects.

This phenomenon indicates that the quality of your network is not very stable.

On the surface, it is still connected, but there are not many valid packets. The actual speed is slow.

Can check it out:

1. The line situation, including interference shielding, crystal head wiring quality, and network cable quality. Don't let these are small places that add up to big problems.

2. Optimize the network, this step still has a certain effect for special situations.

3. Check whether the router configuration and firmware are defective.

If there is a problem with the firmware (that is, the built-in curing program), you can go to the manufacturer's website to find the update.

In addition, you can set how long the signal is not available in the configuration, and it will automatically restart. Although this cannot solve the problem of disconnection, it can save a lot of trouble.