When the power is turned off and the call comes again, the wireless router will have no network, and

Hello landlord.

I think yours is that the router is aging, and the general router will not appear.

This kind of problem. I suggest you don't use such a router anymore, the performance can't keep up with a portable wifi. Pocket wifi on the market is cheap.

Tencent National WiFi is a new portable WiFi device released by Tencent on July 31, compared with similar products, there is a great technical improvement, you just need to plug it into the computer that can be connected to the Internet, and your mobile device can access the Internet for free through it. First of all, the automatic installation of the driver does not require you to install it, saving a lot of time and energy. Secondly, scanning *** login is very fast and safe, and there is no need to be afraid of forgetting the password.

The third anti-Trojan, anti-phishing, anti-rubbing net is powerful. Fourth, the first-of-its-kind cross-network acceleration and online game acceleration ensure the smooth operation of the game.

Hope. Thanks for the good reviews.

This is a router misconfiguration caused by a sudden power outage.

Workaround: Reset the router.

Tools: routers, pencils.

1. Keep the router in normal operation, and it can only be reset when it is powered on.

2. Find the hole behind the router, and the button inside is the reset button, which can be reset through this button.

3. Use the pencil to hold the button for more than 3 seconds.

4. Keep holding the button, and know that the router's indicators are all lit up to reset successfully.

5. If you can't find the login address of the router after resetting, you can check the label on the back.

This is a router misconfiguration caused by a sudden power failure, and you need to re-enter the router settings reset to solve the problem, how to do it:

Tool: iPhone 8

Operating system: iOS

Software: Browser.

1. First open the browser with your mobile phone, as shown in the figure below

4. After entering the interface, enter the router username and password, and click to enter. As shown in the figure below:

5. Enter the interface. As shown in the figure below:

6. Tap WiFi Settings. As shown in the figure below:

7. Finally, set the router parameters and password. As shown in the figure below:

The exclamation mark is caused by not being able to get the address, are you using a wireless network or a wired network? In this way, you manually enter an address, such as restricting to the same network) If your router used to be, then you enter, after entering, enter the gateway address from IE, enter the router settings, and see which item went wrong, and there is a possibility that there is a conflict in the address. I hope my answer is helpful to you.

The gateway of the wireless router does not match the configuration of your computer.

I've also encountered that when you reset the router, you can clear the settings and reset the name and password.

Could it be that the IP of the computer and the IP of the wireless router are duplicated?

Reset the router, plug in the wireless router, don't connect the "modem" (modem) first, reset the wireless router (factory reset), connect the computer to any "LAN" port of the wireless router, enter the settings page, and set it according to the PPPoE (ADSL virtual dialing) method. Then set the SSID, encryption method, and password. Save, restart.

After setting up, connect the network cable from the "cat" to the "WAN" port of the wireless router.

Summary. When the power goes out, that thing disconnects, and then it needs to be restarted.

After the router is powered off, if you call again, even if you don't go online, you need to plug and unplug the router socket again to access the Internet normally. What's going on?

Hello! I'm a friend of you, please wait a while, I'm sorting out the answers! We hope you understand! Thank you! ☺️

Hello! After the router is powered off, if you call again, even if you don't go online, you need to plug and unplug the router socket again to access the Internet normally. This is because he has a power switch in it, which is equivalent to an empty thing when we enter the house.

When the power goes out, that thing disconnects, and then it needs to be restarted.

It is a device that prevents the router from burning out.

This is not the only case with your router, it is true with all routers.

So you don't have to think about whether there is something wrong with this router, the quality is not good. Don't think about it, this is normal.

<>Ask about custom messages].

Summary. Qinqin is happy to answer for you The router has no network after a power outage, it may be because of dial-up configuration, network configuration or other configuration problems, please check whether the configuration is correct; It may also be a problem with the router itself, please check whether there is any damage or other reasons that cause the router to not work properly; Finally, you can try restarting your router device to reset your device.

The router has no network after a power outage, it may be because of dial-up configuration, network configuration or other configuration problems, please start the imitation to check whether the configuration is correct; It may also be a problem with the router itself, please check whether there is any damage or other reasons that cause the router to not work properly; Finally, you can try restarting your router device to reset your device.

How to restart your router.

In general, there is a button on the back of the router that can be restarted by pressing it.

It may also be that there is a problem with the socket plugged into the power supply, it is recommended to check the socket to confirm that there is no open circuit; It may also be that there is a problem inside the router, and you may need to restart the router at this time: first power off, wait for about 30 seconds, and then power on and restart; If the above two steps do not solve the problem, it is recommended to check the network settings on the computer or device to ensure that it has the correct IP address, subnet masking, and other information. If the problem still does not solve the problem, it may be due to a malfunction in the software or firmware of the router, and it is recommended to reinstall the router firmware.

Is it still there? Jump red light after restarting.

Re-firmware upgrade the router. Finally, you can also consider replacing your router with a new one.

What should I do if a call comes in after a power outage and the router can't connect to the network? Pray to the Great God!

A power outage will not change the router's network settings, so: 1, restart the relevant device to see, because the settings have not been modified, so restarting the device can solve it. 2. Sometimes the external network has not been restored, if it cannot be solved, it is recommended to call the relevant broadband service provider directly.

Turn off the router and turn it on after 3 minutes.

Go to the router interface and click Restart.

Disconnect all the wires, turn on the power section, and reinstall it, and you're good to go

Restart, if it doesn't work, link the computer and reset it!

Turn off the router and wait for about 20 seconds before turning it back on.

This is a reconnection on the computer and set to auto-connect.

It doesn't have to be a problem with the router, try to see if you can access the Internet with a direct connection to your computer.

Connect it directly to your laptop.

Press the reset button on your router once, and after a few seconds, wait until all the lights come on together for a successful reset.

You also need to set up the router again (there is a wizard), and watch the tutorial (there is ** and mao).

Resources.

Rebooting is useless to reset the router.