Ask you a question about pool waterproofing 10

The standard depth of the pool is meters, and the average depth of your pool is a bit deep. You can do waterproofing at the bottom of the original structure layer first, and return to the wall 50 cm. Then backfill 30 cm of gravel and level, pour 10 cm of concrete on it, and then do a full waterproof after the concrete curing period.

Waterproofing can be made of polyurethane waterproofing, in the bottom of the pool, the wall of the pool three coat two cloth construction, and then paved brick decoration. You can also use waterproof membrane to cover the bottom of the pool and the wall of the pool with two to three layers and then pave the bricks for decoration. Or with JS waterproof paint. It's up to you to choose according to your needs.

Since there is water in the swimming pool for a long time, it will be very troublesome once the swimming pool leaks, and the swimming pool waterproofing must be done, and the swimming pool waterproofing must be done. Second, the water resistance of waterproof materials should be considered when carrying out waterproof design. The waterproof layer must be reliable, aging resistant, water resistant, corrosion resistant, permanent, and irreplaceable.

3. The waterproof layer must have strong rigidity and flexibility to resist the impact of water pressure, the deformation and cracking of the base layer, and prevent hollowing and water channeling. 1. Rigid waterproof mortar leveling layer: make 30 thick C25 fine stone concrete with 10% waterproofing agent in the bottom plate of the swimming pool, and the side plate of the swimming pool is treated with interface agent before doing 1:

The cement mortar is mixed with a waterproofing agent with a cement dosage of 10% for waterproofing mortar plastering at one bottom, one middle and one side. 2. Flexible waterproof coating: make LM composite waterproof coating 2 thick, add a non-woven fabric, after the painting is completed, you need to make a cement mortar protective layer, and then make a tile decorative layer on top of the protective layer.

If the swimming pool is not waterproofed, there will be water seepage and leakage in the swimming pool in the later stage, which will affect the service life of the entire swimming pool and waste manpower and material resources. It is recommended that you choose reliable waterproof materials with reliable reputation and quality, such as Keshun waterproof.

If the swimming pool is not waterproofed, there will be water seepage and leakage in the pool. It is best to choose a professional waterproof decorative film for waterproofing, otherwise the swimming pool will be repaired every year, and the operating costs will be wasted.

If you don't do waterproofing, it will leak! The water is leaking, how to swim! And what if you don't do waterproofing, what if chemicals from other places get into the body? If you need to do pool waterproofing, you can find Changsha Tiangong Building Waterproofing Project****!

Do not do waterproof and easy to leak, of course, it also depends on what structure the pool is. More information, better advice, free professional technical consultation on concrete waterproof leakage repair.

2. Membrane waterproofing: use waterproof membrane and matching adhesive to spread 2 3 layers on the inner wall and bottom of the swimming pool, and then paste tiles on the surface;

3. Waterproof coating film: apply waterproof paint to the inner wall and bottom of the swimming pool 2 or 3 times (generally the thickness should be greater than 2 mm), and then the surface is tiled;

4. Epoxy overall waterproofing: use epoxy resin to coat the inner surface of the swimming pool, paste fiberglass cloth, carry the map, and then paste, do 3 4 layers (the general thickness should be greater than 2 mm), and then the surface is tiled.

When building a swimming pool, you must first do waterproofing, just like the bathroom is waterproof, and then lay tiles after waterproofing.

There are several practices for swimming pool waterproofing: 1. Hard waterproofing, the entire swimming pool is poured with waterproof concrete. 2. The waterproofing membrane and the supporting adhesive are covered with 2 or 3 layers on the inner wall and bottom of the swimming pool, and then the surface is brushed with pool paint or tiles.

3. Waterproof coating film: use waterproof paint to coat the inner wall and bottom of the swimming pool 2 or 3 times (generally the thickness should be greater than 2 mm), and then brush the surface with pool paint or tiling; 4. The pool paint is waterproof, and two channels of strait pool paint (generally with a thickness of 1 mm) are brushed directly on the masonry swimming pool, which can meet the waterproof requirements, and various colors can also be selected. 5. Epoxy overall waterproofing

Use epoxy resin to coat the inner surface of the swimming pool, paste glass fiber cloth, load the map, and then paste, do 3 4 layers (the general thickness should be greater than 2 mm), and then the surface is tiled;

In the swimming pool waterproofing project, the current more advanced way can be adopted, that is, the swimming pool waterproofing membrane (swimming pool film) is directly laid. Swimming pool adhesive film is used in the pool bottom of the pool wall to do waterproof PVC environmental protection material, to avoid the traditional mosaic swimming pool thermal expansion and contraction caused by cracking, Langdi swimming pool film material is soft and flexible, installed in the pool like a strong big cloth bag, good water storage, the pool can be used for ten years without leakage, will not worry about the problem of customer scratches.

Oh, there are several ways to waterproof swimming pools: 1. Hard waterproofing: the entire swimming pool is poured with waterproof concrete; 2. Membrane waterproofing:

Use waterproofing membrane and matching adhesive to spread 2 or 3 layers on the inner wall and bottom of the swimming pool, and then the surface is tiled; 3. Waterproof coating film: apply waterproof paint to the inner wall and bottom of the swimming pool 2 or 3 times (generally the thickness should be greater than 2 mm), and then the surface is tiled; 4. Epoxy overall waterproofing: use epoxy resin to coat the inner surface of the swimming pool, paste fiberglass cloth, carry the map, and then paste, do 3 4 layers (the general thickness should be greater than 2 mm), and then the surface is tiled.

The swimming pool is waterproof inside and out

Whether it is pouring or masonry, the cement used should be mixed with waterproofing agent The outer waterproofing of the swimming pool is to use modified asphalt on the plane of the foundation foundation, and then brush to the edge of the pool with the bottom after masonry

The inside of the swimming pool is best waterproofed in two layers: the inner layer is made of (cement-based) acrylic, and the outer layer is waterproof with adhesive film

Waterfront décor.